Conference Papers
from ISC Investigators
| 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 |
|---|
2021
Refereed Conference Papers
A. Almasoud, M. Selim, A. Alsharoa, and A. E. Kamal, “Improvement of Bi-directional Communications using Solar Powered Reconfigurable Intelligent Surfaces”, in proc. Of 30th IEEE International Conference on Computer Communications and Networks (ICCCN), Athens, Greece, July 2021. (invited paper)
J. Hunter, S. Xia, A. Harmon, A. Hassan, V. Khilevich, D. Beetner, “Modeling and Statistical Characterization of Electromagnetic Coupling to Electronic Devices,” IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, Jan. 4-9, 2021.
S. Marathe, A. Patnaik, K. Ghosh, J. Kim, D. Pommerenke and D. G. Beetner, “Experimental Validation of an Integrated Circuit Transient Electromagnetic Event Sensor,” 42nd EOS/ESD Symposium, Sept. 13-17, 2020 (invited re-presentation/publication).
S. Walunj, T. Makharashvili, B. Booth, K. Martin, C. Hwang, D. Beetner, “Direct Measurement and Representation of Common-mode Sources in Cable Harnesses,” 2020 IEEE International Symposium on EMC and SIPI, 2020.
J. Zhou, J. Meiguini, S. Bub, S. Holland, G. Notermans, Y. Xu., G. Maghlakelidze, D. Pommerenke, D. Beetner, “Race Conditions Among Protection Devices for a High Speed I/O Interface,” 2020 42nd Annual EOS/ESD Symposium (EOS/ESD), 2020.
Z. Peng, S. Marathe, H. Rezaei, G. Maghlakelidze, D. Pommerenke, A. Foudazi, C.W. Lam, D. Beetner, D. Kim, “Trend Analysis of Dissipated Electrostatic Discharge Energy in Touchscreen Displays,” 2020 IEEE International Symposium on EMC and SIPI, 2020.
H. Rezaei, Z. Peng, S. Marathe, D. Pommerenke, C.W. Lam, A. Foudazi, D. Beetner, D. Kim, “Experimental characterization and methodology for full-wave modeling of ESD to displays,” 2020 IEEE International Symposium on EMC and SIPI, 2020.
J. Hunter, S. Xia, A. Harmon, A. Hassan, V. Khilkevich, and D. Beetner, “Simulation-Driven Statistical Characterization of Electromagnetic Coupling to UAVS,” Annual Directed Energy Science and Technology Symposium, March 2020.
Haotian Chen, Rui Bo, Waqas ur Rehman, “Developing Optimal Energy Arbitrage Strategy for Energy Storage System Using Reinforcement Learning”, accepted, 2021 CIRED Conference, Switzerland
Waqas ur Rehman, Amirhossein Moeini, Oroghene Oboreh-Snapps, Rui Bo, Jonathan Kimball, “Deadband Voltage Control and Power Buffering for Extreme Fast Charging Station”, accepted, 2021 IEEE PES PowerTech Madrid
Arnold Fernandes, Rui Bo, Jonathan Kimball, Bruce McMillin, “Detection of Gaussian Attacks in Power Systems under a Scalable Kalman Consensus Filter Framework”, accepted, 2021 IEEE PES General Meeting
Waqas ur Rehman, Rui Bo, Hossein Mehdipourpicha, Jonathan Kimball, “Sizing Energy Storage System for Energy Arbitrage in Extreme Fast Charging Station”, accepted (Best Conference Paper, top 10%), 2021 IEEE PES General Meeting
Md Masud Rana, Ahmed Abdelhadi, Rui Bo, “Distributed attack-resilient grid state estimation algorithm using optimal filter and graph theory,” IEEE International Symposium on Systems Engineering (ISSE), Vienna, Austria, October 20-22, 2020
Haotian Chen, Rui Bo, Ronit Das, Donald Wunsch, “Exploring Reinforcement Learning Method In Bidding Strategy Development for Day-Ahead Electricity Market,” accepted, 2020 IEEE PES Asia-Pacific Power & Energy Engineering Conference (APPEEC), Nanjing, China
Hossein Mehdipourpicha, Rui Bo, Siyuan Wang, “Joint Bidding Strategy in Day ahead Electricity Market and FTR Auction Market”, accepted, 2020 IEEE PES Asia-Pacific Power & Energy Engineering Conference (APPEEC), Nanjing, China
Ronit Das, Rui Bo, Waqas Ur Rehman, Haotian Chen, Donald Wunsch, “Cross-Market Price Difference Forecast Using Deep Learning for Electricity Markets”, accepted, 2020 IEEE PES Innovative Smart Grid Technologies Europe (ISGT-Europe), Hague, Netherlands.
Hossein Mehdipourpicha, Rui Bo, “Risk-constrained Bi-level Optimization for Virtual Bidder Bidding Strategy in Day-Ahead Electricity Markets”, accepted (Best Conference Paper, top 10%), 2020 IEEE PES General Meeting, Montreal Canada
Prediction of Damage During Different Hot Rolling Schedules of Medium-Carbon V-Microalloyed Steel, AISTech 2021
Design and Evaluation of a Lab Size Vacuum Sampling Method for Simulating the Twin-Roll Strip Casting Process. AISTech 2021
Hot Ductility Behavior of V-N Microalloyed Steels. AISTech 2021
Subramanian, H. V., Canfield, C., Shank, D. B., Andrews, L., & Dagli, C. (2020) Communicating Uncertain Information from Deep Learning Models in Human Machine Teams. Proceedings of the American Society for Engineering Management.
Valentín-Sívico, J., Canfield, C. & Egbue, O. (2020). Rural Access to Industry 4.0: Public Sector Management of Broadband. Proceedings of the Institute of Industrial & Systems Engineers.
Y. Long, N. Cen, “Sum-Rate Optimization for Visible-Light-Band UAV Networks Based on Particle Swarm Optimization” submitted to conference.
Ganguly, S., Buchely, M. F., Chandrashekhara, K., Lekakh, S. and O’Malley, R., “ A Modified Johnson-Cook Model Incorporating the Effect of Grain Size on Flow Stress,” Proceedings of the Iron & Steel Technology Conference, pp.1614-1621, Cleveland, OH, August 31 – September 3, 2020.
Goldschmid, Joshua, Gude, Vinayaka, and Corns, Steven (2021) “SoS Explorer Application with Fuzzy-Genetic Algorithms to Assess an Enterprise Architecture – A Healthcare Case Study,” Complex Adaptive Systems 2021 Conference
Kanwar, B., Corns, S.M., and Long, S. (2020) “Predictive Deep Learning for Flood Management Planning and Restoration of Critical Infrastructure,” Proceedings of the American Society for Engineering Management 2020 International Annual Conference, Online, October 2020
Ram Deepak Gottapu, Cihan H Dagli, “Efficient Architecture Search for Deep Neural Networks,” Procedia Computer Science, Volume 168, 2020, Pages 19-25, ISSN 1877-0509.
MA Schnitzler, C Dagli, C Canfield, N Dzebisashvili, C Varma, D Axelrod, K Lentine, R Ouseph, H Randall “Using Artificial Intelligence Tools for Identification of High-Risk Transplant Recipients for Focused Management”- AMERICAN JOURNAL OF TRANSPLANTATION, 20, 283-284, 2020
Y. Li and C. Dagli, “A System of Systems Approach to Optimize a Realtime Risk Situational Awareness System,” 2020 IEEE 15th International Conference of System of Systems Engineering (SoSE), Budapest, Hungary, 2020, pp. 17-22, doi: 10.1109/SoSE50414.2020.9130493.
S. Vanfossan, C. H. Dagli and B. Kwasa, “A system-of-systems meta-architecting approach for seru production system design,” 2020 IEEE 15th International Conference of System of Systems Engineering (SoSE), Budapest, Hungary, 2020, pp. 29-34, doi: 10.1109/SoSE50414.2020.9130488.
M. M. Karim and C. H. Dagli, “SoS Meta-Architecture Selection for Infrastructure Inspection System Using Aerial Drones,” 2020 IEEE 15th International Conference of System of Systems Engineering (SoSE), Budapest, Hungary, 2020, pp. 23-28, doi: 10.1109/SoSE50414.2020.9130538.
Rayan Assaad, Cihan Dagli, Islam H. El-adaway, “A System-of-Systems Model to Simulate the Complex Emergent Behavior of Vehicle Traffic on an Urban Transportation Infrastructure Network,” Procedia Computer Science, Volume 168, 2020, Pages 139-146, ISSN 1877-0509.
Muhammad Monjurul Karim, Cihan H. Dagli, Ruwen Qin,” Modeling and Simulation of a Robotic Bridge Inspection System,” Procedia Computer Science, Volume 168, 2020, Pages 177-185, ISSN 1877-0509.
Samuel Vanfossan, Cihan H. Dagli, Benjamin Kwasa, “An Agent-Based Approach to Artificial Stock Market Modeling,” Procedia Computer Science, Volume 168, 2020, Pages 161-169, ISSN 1877-0509.
Mohamad Abdul Nabi, Islam H. El-adaway, Cihan Dagli, “A System Dynamics Model for Construction Safety Behavior,” Procedia Computer Science, Volume 168, 2020, Pages 249-256, ISSN 1877-0509.
Vinayaka Gude, Steve Corns, Cihan Dagli, Suzanna Long, “Agent Based Modeling for Flood Inundation Mapping and Rerouting,” Procedia Computer Science, Volume 168, 2020, Pages 170-176, ISSN 1877-0509.
Gasser Galal Ali, Islam H. El-adaway, Cihan H. Dagli, “A System Dynamics Approach for Study of Population Growth and The Residential Housing Market in the US,” Procedia Computer Science, Volume 168, 2020, Pages 154-160, ISSN 1877-0509.
Amr Elsayegh, Cihan H. Dagli, Islam H. El-adaway, “An Agent-based Model to Study Competitive Construction Bidding and the Winner’s Curse,” Procedia Computer Science, Volume 168, 2020, Pages 147-153, ISSN 1877-0509.
Md. Monirul Islam, Cihan H. Dagli, Zeyi Sun, “A Model to Estimate the Lifetime of BESS for the Prosumer Community of Manufacturers with OGS,” Procedia Computer Science, Volume 168, 2020, Pages 186-194, ISSN 1877-0509.
Farhangi, Hadi, Dinçer Konur, and Cihan H. Dagli. “A Separation Method for Solving Multiobjective Set Covering Problem.” Proceedings of the 2016 Industrial and Systems Engineering Research Conference H. Yang, Z. Kong, and MD Sarder, eds. Page 2320, 2020
Harishankar V Subramanian, Casey I Canfield, Daniel Burton Shank, Luke Andrews, Cihan H Dagli “Communicating Uncertain Information from Deep Learning Models in Human Machine Teams,” Proceedings of the American Society for Engineering Management 2020 International Annual Conference, American Society for Engineering Management (ASEM), Oct 2020.
Jacob Hale, Suzanna Long, Steve Corns, Cihan H Dagli et al., “A Computational Intelligence Approach to Transitioning an Electricity Portfolio,” Proceedings of the IISE Annual Conference and Expo 2020 (2020, Virtual), Institute of Industrial and Systems Engineers (IISE), Nov 2020.
P. Roy, S. Bhattacharjee, H. Alsheakh, and S. K. Das, “Resilience Against Bad Mouthing Attacks in Mobile Crowdsensing Systems via Cyber Deception,” IEEE Symposium on a World of Wireless Mobile Multimedia Networks (WoWMoM), pp. 169-178, June 2021.
S. Bhattacharjee, V. P. Madhavarapu, and S. K. Das, “A Diversity Index based Scoring Framework for Identifying Smart Meters Launching Stealthy Data Falsification Attacks,” ACM Asia Conference on Computer and Communications Security (ASIACCS), pp. 26-39, June 2021.
D. De, D. Burns, M. Makos, B. Bachman, and S. K. Das, “Alz-Sense: A Novel Non-invasive Pre-Clinical Testing to Differentiate Dementia from MCI,” IEEE International Conference on Communications (ICC): SAC E-Health Track, June 2021.
A. Khochare, Y. Simmhan, F. B. Sorbelli, and S. K. Das, “Heuristic Algorithms for Co-scheduling of Edge Analytics and Routes for UAV Fleet Missions,” IEEE International Conference on Computer Communications (INFOCOM), May 2021.
T. She, S. Vaidhun, Q. Gu, S. K. Das, Z. Guo, and K. Yang, “Precise Scheduling of Mixed-Criticality Tasks on Varying-Speed Multiprocessors,” 29th International Conf. on Real-Time Networks and Systems, Apr 2021.
M. Chen, W. Liang, and S. K. Das, “The Utility Maximization for Data Collection in UAV-enabled Sensor Networks via Judiciously Determining Hovering Locations,” 19th IEEE International Conference on Pervasive Computing and Communications (PerCom), Mar 2021.
L. S. Chandran, S. K. Das, P. Hell, S. Padinhatteeri, R. R. Pillai, “Rainbow Coloring of Proper Interval Graphs,” 7th International Conference on Algorithms and Discrete Applied Mathematics, 452-470, Feb 2021.
H. S. Ali, R. R. Rout, P. Parimi, and S. K. Das, “Real-Time Task Scheduling in Fog-Cloud Computing Framework for IoT Applications: A Fuzzy Logic-based Approach,” 13th International Conference on Communication Systems and Networks (COMSNETS), Jan 2021.
P. Roy, S. Bhattacharjee, and S. K. Das, “Real Time Stream Mining based Attack Detection in Distribution Level PMUs for Smart Grids,” IEEE Global Communications Conference (GlobeCom): Symposium on Smart Grid Communications and Power Line Communications, Dec 2020.
J. Vyas, D. Das, and S. K. Das, “Vehicular Edge Computing based Driver Recommendation System Using Federated Learning,” IEEE 17th Int’l Conf. on Mobile Ad Hoc and Sensor Systems, Dec 2020.
Y. Ishimaki, S. Bhattacharjee, H. Yamana, and S. K. Das, “Towards Privacy-Preserving Anomaly-based Attack Detection against Data Falsification in Smart Grid,” IEEE International Conference on Communications, Control, and Computing Technologies for Smart Grids (SmartGridComm), Nov 2020.
A. Nahar, D. Das, and S. K. Das, “OBQR: Orientation-Based Source QoS Routing in VANETs,” 23rd International Conference on Modeling, Analysis and Simulation of Wireless and Mobile Systems (MSWiM), pp. 199-206, Nov 2020.
G. Lingam, R. R. Rout, D. V. L. N. Somayajulu, and S. K. Das, “Social Botnet Community Detection: A Novel Approach based on Behavioral Similarity in Twitter Network using Deep Learning,” 15th ACM ASIA Conference on Computer and Communications Security (ASIACCS), Oct 2020.
F. De Vita, G. Nocera, D. Bruneo, V. Tomaselli, D. Giacalone, and S. K. Das, “Quantitative Analysis of Deep Leaf: a Plant Disease Detector on Smart Edge,” IEEE Conf. on Smart Computing (SMARTCOMP), Sep 2020 (Best Paper Award Runner Up).
A. Pandey, P. Tiwary, S. Kumar, and S. K. Das, “Residual Neural Networks for Heterogeneous Smart Device Localization in IoT Networks,” 29th International Conference on Computer Communication and Networks (ICCCN), Aug 2020.
S. Vaidhun, Z. Guo, J. Bian, H. Xiong, and S. K. Das, “Priority-based Multi-Flight Path Planning with Uncertain Sector Capacities,” 12th Int’l Conf. on Advanced Computational Intelligence, pp. 529-535, A2020.
W. Xu, W. Liang, Z. Xu, J. Peng, T. Li, X. Jia, S. K. Das, “Approximation Algorithms for Team Orienteering Problem,” IEEE Int’l Conf on Computer Communications (INFOCOM), pp. 1389-1398, July 2020.
Thakur, A. R.*, Pappas, J. M.*, and Dong, X.#, “Large-Scale Additive Manufacturing of High Strength Fiber-Reinforced Polymer Composites,” SAMPE 2021, TP20-0000000214, 2021, Long Beach, California, USA.
*Pappas, J. M.*, Kinzel, E. C., and Dong, X.#, “Fabrication and Characterization of Transparent Spinel Ceramics Prepared by Laser Direct Deposition,” ICALEO 2020 International Congress on Applications of Lasers and Electro-Optics, LAM 502, 2020, Chicago, Illinois, USA.
*Thakur, A. R.*, Leu, M. C., and Dong, X.#, “Feasibility and Characterization of Large-Scale Additive Manufacturing with Long Fiber Reinforced Composites,” ASME 2020 International Manufacturing Science and Engineering Conference, MSEC2020-8257, 2020, Cincinnati, Ohio, USA.
*Pappas, J. M.* and Dong, X.#, “Effects of Processing Conditions on Laser Direct Deposited Alumina Ceramics,” ASME 2020 International Manufacturing Science and Engineering Conference, MSEC2020-8260, 2020, Cincinnati, Ohio, USA.
S. Yazdani, M. Ferdowsi, and P. Shamsi, “Internal model based PID tuning of a phase-shift control in a single-phase bidirectional dual active bridge DC-DC converter,” in Proc. IEEE Energy Conversion Congress and Exposition (ECCE), Detroit, MI, Oct. 2020, pp. 5966-5970.
S. Yazdani, M. Ferdowsi, and P. Shamsi, “Adaptive-passive virtual inertia control based on energy balance between a synchronous generator and a three-phase inverter,” in Proc. IEEE Energy Conversion Congress and Exposition (ECCE), Detroit, MI, Oct. 2020, pp. 5027-5031.
S. Yazdani, M. Ferdowsi, and P. Shamsi, “Internal model based current control with embedded active damping on a three-level PV-flying capacitor multilevel inverter with LCL filter,” in Proc. IEEE Kansas Power & Energy Conference (KPEC), Manhattan, KS, July 2020, pp.
S. Yazdani, M. Ferdowsi, and P. Shamsi, “Virtual inertia-based control of PV-STATCOM: operation under unbalanced frequency and grid conditions,” in Proc. IEEE Kansas Power & Energy Conference (KPEC), Manhattan, KS, July 2020, pp.
S. Yazdani, M. Ferdowsi, and P. Shamsi, “Power synchronization PID control method for grid-connected voltage-source converters,” in Proc. IEEE Kansas Power & Energy Conference (KPEC), Manhattan, KS, July 2020, pp.
M. Altimania, M.S. Sanjari Nia, M. Ferdowsi, and P. Shamsi, “A non-isolated high-voltage-gain dc-dc converter with modified Greinacher voltage multiplier in DCM,” in Proc. IEEE Kansas Power & Energy Conference (KPEC), Manhattan, KS, July 2020, pp.
M. Altimania, M.S. Sanjari Nia, M. Ferdowsi, and P. Shamsi, “A new topology of a high-voltage-gain dc-dc converter based on modified Greinacher voltage,” in Proc. IEEE Kansas Power & Energy Conference (KPEC), Manhattan, KS, July 2020, pp.
M.S. Sanjari Nia, M. Altimania, P. Shamsi, and M. Ferdowsi, “Magnetic field analysis for HF transformers with coaxial winding,” in Proc. IEEE Kansas Power & Energy Conference (KPEC), Manhattan, KS, July 2020, pp.
M.S. Sanjari Nia, M. Altimania, P. Shamsi, and M. Ferdowsi, “Electric field and parasitic capacitance analysis for HF transformers with coaxial winding arrangements,” in Proc. IEEE Kansas Power & Energy Conference (KPEC), Manhattan, KS, July 2020, pp.
Xinpeng Wei, Daoru Han, and Xiaoping Du. Predicting Average Product Lifetime Using Physics-Based Gaussian Process Method in Early Design Stage. In ASME IDETC/CIE 2020 (virtual/online), St. Louis, Missouri, August 16-19, 2020.
Joshua D. Burch, Daoru Han, and Sergey N. Averkin. Numerical Investigations of 2-D Magnetic Nozzle Effects on Plasma Plumes. In AIAA Propulsion and Energy Forum 2020, AIAA 2020-3643, VIRTUAL EVENT, August 24-28, 2020.
Jianxun Zhao, Xinpeng Wei, Xiaoming He, Daoru Han, and Xiaoping Du. Fully-Kinetic Particle-in-Cell Simulations of Photoelectron Sheath on Uneven Lunar Surface. In AIAA SciTech 2021, AIAA 2021-1433, Virtual Event, January 11-15 & 19-21, 2021.
David Lund, Jianxun Zhao, and Daoru Han. Fully-Kinetic PIFE-PIC Simulations of Photoelectron Sheaths and Plasma Charging at Lunar Craters. In AIAA SciTech 2021, AIAA 2021-1434, Virtual Event, January 11-15 & 19-21, 2021.
M. Roman and J. Huang, “Applications of Fiber Optic Sensors in Ceramic Industry,” 56th Annual Symposium on Refractories, March 2021, St. Louis, MO.
M. Roman, D. Balogun, R. E. Gerald II, L. Bartlett, J. Huang, and R. J. O’Malley, “Peritectic Behavior Detection in the Fe-C-Mn-Al-Si Steel System using Fiber Optic Temperature Mapping,” Proceedings of the AISTech 2020 (2020, Cleveland, OH), pp. 822-833, Association for Iron & Steel Technology (AIST), Sep 2020.
D. Balogun, M. Roman, R. E. Gerald II, L. Bartlett, J. Huang, and R. J. O’Malley, “A Fiber Optic Distributed Temperature Mapping Technique to Characterize Shell Solidification in Peritectic Grade Steels,” Proceedings of the AISTech 2021 (2021, Nashville, TN), pp. 471-479, Association for Iron & Steel Technology (AIST), June 2020.
D. Balogun, M. Roman, J. Huang, R.E. Gerald, and R. J. O’Malley, “Peritectic Behavior Detection in the Fe-C-Mn-Al-Si Steel System using Fiber Optic Temperature Mapping”, Proc. AISTech 2020, PR-380-087.13370, http://digital.library.aist.org/categories/2020aistechconferenceproceedings-pr.htm
W. Song, Y. Zhong, C. Kim, C. Park, and C. Hwang, “Transfer Function Measurement for Automotive Intentional Electromagnetic Interference” IEEE EMC+SIPI, Reno, NV, 2020, pp. 276-281.
L. Zhang, W. Huang, J. Juang, H. Lin, B.C. Tseng, and C. Hwang, “An Enhanced Deep Reinforcement Learning Algorithm for Decoupling Capacitor Selection in Power Distribution Network Design” IEEE EMC+ SIPI, Reno, NV, pp. 245-250.
O. H. Izadi, K. Frazier, N. Altunyurt, S. Sedighsarvestani, D. Pommerenke, and C. Hwang, “A New Tunable Damped Sine-like Waveform Generator for IEMI Applications” IEEE EMC+ SIPI, Reno, NV, 2020, pp.282-286.
Y. Sun, S. Wu, J. Zhang, C. Hwang, and Z. Yang, “Decoupling Capacitor Layout Design Guidelines with Acoustic Noise Consideration in Power Distribution Network” IEEE EMC+ SIPI, Reno, NV, 2020, pp. 357-362.
S. Waluji, T. Makharashvili, C. Hwang, D. Beetner, B. Booth, and K. Martin, “Direct Measurement and Representation of Common-mode Sources in Cable Harnesses” IEEE EMC+ SIPI, Reno, NV, 2020, pp. 118-120.
J. Joo, W. Song, B. Bae, H. Kim, S. Lee, Y. Kwon, and C. Hwang, “Complex Permittivity Extraction using Substrate Integrated Waveguide Cavity Resonator without Cross-Sectioning” IEEE EMC+SIPI, Reno, NV, 2020, pp. 113-117.
Y. Sun, S. Wu, J. Zhang, C. Hwang, and Z. Yang, “Measurement Investigation of MLCC Mounting Variation Impact on Acoustic Noise in Power Distribution Network” IEEE EMC+ SIPI, Reno, NV, 2020, pp. 363-368.
M. Ouyang, Y. Sun, J. Lee, J. Kim, and C. Hwang, “Mechanism Analysis on Radio Frequency Radiation in IC/Package with Bonding Wires” IEEE EMC+SIPI, Reno, NV, 2020, pp.133-138.
K. Northcut, A. Krolikowski, C. Kueny, K. Yang, R. Glaser. “Transnational Science Publication Ethics Training Using Scenarios.” ProComm IEEE Conference Proceedings. 2020
“Dynamic Gesture Design and Recognition for Human-Robot Collaboration with Convolutional Neural Networks,” H. Chen, W. Tao, M. C. Leu, and Z. Yin, Proceedings of the 2020 International Symposium on Flexible Automation (ISFA 2020), Jul. 5-9, 2020, Chicago, IL.
“Action Completeness Modeling with Background Aware Networks for Weakly-Supervised Temporal Action Localization,” M. Moniruzzaman, Z. Yin, Z. He, R. Qin, and M. C. Leu, Proceedings of ACM Multimedia Conference 2020, Oct. 12-16, 2020, Seattle, WA.
“Design of a Real-Time Human-Robot Collaboration System Operated by Dynamic Gestures,” H. Chen, M. C. Leu, W. Tao and Z. Yin, Proceedings of the ASME 2020 International Mechanical Engineering Congress and Exposition (IMECE 2020), November 13-19, 2020, Portland, OR.
“Additively Manufactured Interdigital Filters for Ultra-Wideband Radar,” Fernando Rodriguez-Morales, Ben Brown, Austin Sutton, Ming Leu, Frank Liou, Sean Garrison, and Ambrose Wolf, Proceedings of 2021 IEEE Radio & Wireless Week (RWW 2021), Jan. 17 – 20, 2021, San Diego, CA.
“Resilient Error-bounded Lossy compressor for Data Transfer.” SC’21.
“Error-controlled, Progressive, and Adaptable Retrieval of Scientific Data with Multilevel Decomposition.” SC’21
“Revisiting Huffman Coding: Toward Extreme Performance on Modern GPU Architectures.” IPDPS’21.
“Accelerating Multigrid-based Hierarchical Scientific Data Refactoring on GPUs.” IPDPS’21.
Hollan, C. Jason and Long, Suzanna “Disaster Planning in the Age of Pandemics,” Proceedings of the IISE Annual Conference and Expo 2021, June 2021.
Hale, Jacob and Long, Suzanna “Transitioning Power Generation to Renewable Portfolios,” Proceedings of the IISE Annual Conference and Expo 2021, June 2021, Invited Session.
Hale, Jacob, Long, Suzanna, Corns, Steven, and Dagli, Cihan “A Computational Intelligence Approach to Transitioning an Electricity Portfolio,” Proceedings of the IISE Annual Conference and Expo 2020, New Orleans, LA, June 2020. Invited Session
L. Zeynalvand, T. Luo, E. Andrejczuk, D. Niyato, S.G. Teo, and J. Zhang, “A Blockchain-Enabled Quantitative Approach to Trust and Reputation Management with Sparse Evidence,” International Conference on Autonomous Agents and Multiagent Systems (AAMAS), May 2021.
M.V. Ngo, T. Luo, H.T. Hoang, and T. Quek, “Coordinated Container Migration and Base Station Handover in Mobile Edge Computing,” IEEE Global Communications Conference (GLOBECOM), December 2020.
H. Wong and T. Luo, “Man-in-the-Middle Attacks on MQTT-based IoT Using BERT based Adversarial Message Generation,” 26th ACM SIGKDD International Conference on Knowledge Discovery and Data Mining (KDD), 3rd AioT Workshop, August 2020.
M.V. Ngo, T. Luo, H. Chaouchi, and T. Quek, “Contextual-Bandit Anomaly Detection for IoT Data in Distributed Hierarchical Edge Computing,” IEEE International Conference on Distributed Computing Systems (ICDCS), December 2020.
Md Yasin Kabir, Sergey Gruzdev and Sanjay Madria, STIMULATE: A System for Real-time Information Acquisition and Learning for Disaster Management, in proceedings of IEEE MDM, 2020, Paris, France.
F. Love, J. Leopold, B. McMillin, F. Su, Discriminative Pattern Mining for Runtime Security Enforcement of Cyber-Physical Point-of-Care Medical Technology, 2021 IEEE 45th Annual Computers, Software, and Applications Conference (COMPSAC), 2021, pp. 1066-1072.
J. Aguma, B. McMillin, and A. Regan. Introduction of a Hybrid Monitor for Cyber-Physical Systems. Science and Information Conference, Springer, Cham, 2020, pp. 348-360.
S. Thougaard and B. McMillin, Distributed Bias Detection in Cyber-Physical Systems, Fourteenth IFIP WG 11.10 Conference on Critical Infrastructure Protection, 2020, Springer, pp. 245-260.
M. Wagner and B. McMillin, Efficient Blockchain Authentication Scheme for VANETs, Fourteenth IFIP WG 11.10 Conference on Critical Infrastructure Protection, 2020, Springer, pp. 87-109.
J. L. Leopold, B. McMillin, R. I. Stiffler and N. A. Lutes, A Comparison Of Design- and Data- Centric Methods For Distributed Attack Detection, Fourteenth IFIP WG 11.10 Conference on Critical Infrastructure Protection, 2020, Springer, pp. 261-279.
A. Thudimilla and B. McMillin, Cyber Physical Security Of Air Traffic Surveillance Systems, IFIP WG 11.10 Conference on Critical Infrastructure Protection, 2020, Springer, pp. 3-23.
Okafor, AC, and Nwoguh, TO. "Evaluation of Soybean Oil-Based MQL as a Potential Replacement for Emulsion Flood Cooling Strategy for High-Speed Face Milling of Inconel 718." Proceedings of the ASME 2020 15th International Manufacturing Science and Engineering Conference. Volume 1: Additive Manufacturing; Advanced Materials Manufacturing; Biomanufacturing; Life Cycle Engineering; Manufacturing Equipment and Automation. Virtual, Online. September 3, 2020. V001T05A020. ASME, online January 15, 2021. https://doi.org/10.1115/MSEC2020-8316
Nwoguh, TO, and Okafor, AC, Effects of Milling Method and Cutting Speed on Cutting Force and Tool Wear.” Proceedings of the 14th Annual ISC Graduate Research Symposium ISC-GRS 2021 April 28, 2021, Rolla, Missouri.
Invited Workshop Participant: A. Chukwujekwu Okafor, invited participant of the North American Manufacturing Research Institute (NAMRI) Manufacturing Education Workshop (virtual) on Monday, June 21 from 2-5 pm EDT before NAMRC-MSEC. SME NAMRI Manufacturing Engineering Education Working Group, led by Brian Paul, put together the workshop agenda. This workshop is sponsored by the Society for Manufacturing Engineers (SME). This workshop is aimed to address shortcomings in Manufacturing Engineering education, understand industry (e.g., GM and GE) needs, and engage with funding agencies (e.g., NSF and DOD).
Subhash S, Obafemi-Ajayi T, Goodman D, Wunsch DC, and Olbricht GR. (2020) “Predictive modeling of sports-related concussions using clinical assessment metrics", IEEE Symposium Series on Computational Intelligence (SSCI), pp. 513-520.
Nguyen T, Viehman J, Yeboah D, Olbricht GR, and Obafemi-Ajayi T. (2020) “Statistical comparative analysis and evaluation of validation indices for clustering optimization", IEEE Symposium Series on Computational Intelligence (SSCI), pp. 3081-3090.
Rohollah Moghadam, and S. Jagannathan, “Optimal adaptive regulation of uncertain linear continuous-time systems with state and input delays”, Proc. of the IEEE Conference on Decision and Control, pp. 132-137, December 2020.
Rohollah Moghadam, P. Rajan, and S. Jagannathan, “Multilayer neural network-based optimal adaptive tracking control of partially uncertain nonlinear discrete-time systems”, Proc. of the IEEE Conference on Decision and Control, pp. 2204-2209, December 2020.
Jinna Li, Zhenfei Xiao, TianYou Chai, Frank L. Lewis, and S. Jagannathan, “Off-policy Q-learning for anti-interference control of multi-player systems”, Proc of the IFAC World Congress, Berlin Germany, July 2020.
Rohollah Moghadam, Pappa Natarajan, Krishnan Raghavan and S. Jagannathan, “Online optimal adaptive control of a class of uncertain nonlinear discrete-time systems”, Proc. of the IEEE International Joint Conference on Neural Networks (IJCNN) as part of WCCI, pp. 1-6, August 2020.
R. Moghadam and S. Jagannathan, “Optimal control of linear continuous-time systems in the presence of state and input delays with application to a chemical reactor”, Proc. of American Controls Conference, pp. 999-1004, July 2020.
C. Bhowmick and S. Jagannathan, “Availability-resilient control of uncertain linear stochastic networked control systems", Proc. of American Controls Conference, pp. 4016-4021, July 2020.
A. Raj, S. Jagannathan, T. Yucelen, "Distributed Adaptive State Estimation and Tracking Scheme for Nonlinear Systems Using Active Passive Sensor Networks, Proc. of American Controls Conference, pp. 2587-2592, July 2020.
O. Hoseini Izadi, K. Frazier, N. Altunyurt, S. Sedigh Sarvestani, D. Pommerenke, and C. Hwang. A new tunable damped sine-like waveform generator for IEMI applications. In Proceedings of the IEEE International Symposium on Electromagnetic Compatibility & Signal/Power Integrity, Virtual, Aug. 2020.
S. Yazdani, M. Ferdowsi and P. Shamsi (20%), "Adaptive-Passive Virtual Inertia Control Based on Energy Balance Between a Synchronous Generator and a Three-Phase Inverter," 2020 IEEE Energy Conversion Congress and Exposition (ECCE), Detroit, MI, USA, 2020, pp. 5027-5031
S. Yazdani, M. Ferdowsi and P. Shamsi (20%), "Internal Model based PID Tuning of A Phase-Shift Control In A Single-Phase Bidirectional Dual Active Bridge DC-DC Converter," 2020 IEEE Energy Conversion Congress and Exposition (ECCE), Detroit, MI, USA, 2020, pp. 5966-5970
M. Altimania, M. S. S. Nia, M. Ferdowsi and P. Shamsi (20%), "An Interleaved Non-Isolated DC-DC Boost Converter with Voltage Doubler Cell in CCM," 2020 IEEE Green Technologies Conference (GreenTech), Oklahoma City, OK, USA, 2020, pp. 1-5
S. Yazdani, M. Ferdowsi, P. Shamsi (30%), “Power Synchronization PID Control Method for Grid-Connected Voltage-Source Converters,” IEEE Kansas Power and Energy Conference (KPEC), 2020
S. Yazdani, M. Ferdowsi, P. Shamsi (30%), “Virtual Inertia Based Control of PV-STATCOM: Operation Under Unbalanced Frequency and Grid Conditions,” IEEE Kansas Power and Energy Conference (KPEC), 2020
S. Yazdani, M. Ferdowsi, M. Davari, P. Shamsi (25%), “Internal Model Based Control to Tackle Non-Minimum Phase Behavior in Three-Phase Z-Source Inverters,” IEEE Applied Power Electronics Conference and Exposition (APEC), 1904-1910, 2020
S. Yazdani, M. Ferdowsi, M. Davari, P. Shamsi (25%), “Robust Sliding Mode Control of A Three-Phase Grid-Forming Inverter in Non-Ideal Grid Conditions and Isolated Mode of Operation,” IEEE Applied Power Electronics Conference and Exposition (APEC), 3087-3091, 2020
H. Alharkan, P. Shamsi (25%), S. Saadatmand, M. Ferdowsi, “Q-Learning Scheduling for Tracking Current Control of Switched Reluctance Motor Drives,” IEEE Power and Energy Conference at Illinois (PECI), 2020
S. Saadatmand, H. Alharkan, P. Shamsi (25%), M. Ferdowsi, “Value Gradient Learning Approach in Power and Frequency Regulation of Grid-Connected Synchronverters,” IEEE Power and Energy Conference at Illinois (PECI), 2020
S. Saadatmand, P. Shamsi (30%), M. Ferdowsi, “The Voltage Regulation of a Buck Converter Using a Neural Network Predictive Controller,” IEEE Texas Power and Energy Conference (TPEC), 2020
S. Saadatmand, P. Shamsi (30%), M. Ferdowsi, “The Heuristic Dynamic Programming Approach in Boost Converters,” IEEE Texas Power and Energy Conference (TPEC), 2020
M. Altimania, M.S. Sanjarinia, M. Ferdowsi, P. Shamsi (20%), “Magnetic Field Analysis for HF Transformers with Coaxial Winding Arrangements,” IEEE Kansas Power and Energy Conference (KPEC), 2020
M. Altimania, M.S. Sanjarinia, M. Ferdowsi, P. Shamsi (20%), “A Non-Isolated High-Voltage-Gain DC-DC Converter with Modified Greinacher Voltage Multiplier in DCM,” IEEE Kansas Power and Energy Conference (KPEC), 2020
Sujit Subhash, Tayo Obafemi-Ajayi, Dennis Goodman, Donald Wunsch II and Gayla Olbricht, “Predictive Modeling of Sports-Related Concussions using Clinical Assessment Metrics,” IEEE Symposium Series on Computational Intelligence, December 2020.
Ronit Das, Rui Bo, Waqas Ur Rehman, Haotian Chen, and Donald Wunsch II, “Cross-Market Price Difference Forecast Using Deep Learning for Electricity Markets,” IEEE PES Innovative Smart Grid Technologies Europe, pp. 854-858, October 2020.
Haotian Chen, Rui Bo, Ronit Das, Donald Wunsch, “Exploring Reinforcement Learning Method in Bidding Strategy Development for Day-Ahead Electricity Market,” IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC), pp. 1-5, September 2020.
Louis Steinmeister, Dacosta Yeboah, Gayla Olbricht, Tayo Oberfami-Ajayi, Bassam Hadi, Daniel Hier, Donald C. Wunsch II, “Handling missing data for unsupervised learning with an application on a FITBIR Traumatic Brain Injury (TBI) Dataset,” Military Health System Research Symposium, August 2020.
Islam Elnabarawy, Kristijana Arroyo, Donald C. Wunsch II , “StarCraft II Build Order Optimization using Deep Reinforcement Learning and Monte-Carlo Tree Search,” arXiv:2006.10525, June 12, 2020.
Zachary Roy, Sujit Subhash, Lien Bui, Bassam Hadi, Daniel Hier, Donald Wunsch, Gayla Olbricht, Tayo Obafemi-Ajayi, “Exploratory Analysis of Concussion Recovery Trajectories using Multi-modal Assessments and Serum Biomarkers,” IEEE Engineering in Medicine and Biology Society Annual Conference (EMBC 2020), July 2020.
Raghu Yelugam, Leonardo Enzo Brito da Silva and Donald C. Wunsch II, “TopoBARTMAP: Biclustering ARTMAP With or Without Topological Methods in a Blood Cancer Case Study, IEEE / INNS International Joint Conference on Neural Networks (IJCNN 20), July 2020.
S Saadatmand, S Azizi, M Kavousi, D Wunsch, “Autonomous Control of a Line Follower Robot Using a Q-Learning Controller,” IEEE Computing and Communication Workshop and Conference, January 2020.
Islam Elnabarawy, Wei Jiang, Donald C. Wunsch II, “Survey of Privacy-Preserving Collaborative Filtering,” IEEE / INNS IJCNN 2020 Secure Learning Workshop, July 21, 2020, also available on: arXiv:2003.08343.
Nofal, O. M., Lindt, J. W. van de, Yan, G., Hamideh, S., and Dietrich, C. (2021), “Multi-Hazard Hurricane Vulnerability Model to Enable Resilience-Informed Decision.” Proceedings of International Structural Engineering and Construction (ISEC-11), S. El Baradei, A. Madian, A. Singh, and S. Yazdani, eds., Cairo, Egypt.
Megan Gallagher, Sara Hamideh, John van de Lindt and Guirong Yan (2021), “Coastal Community Resilience Bonds to Enable Coupled Socio-Physical Recovery.” 2021 Researchers Meeting
Ryan Honerkamp, Guirong Yan, and John W. van de Lindt (2021), “Design Wind Loading for Elevated Buildings under Hurricanes.” SEI and ASCE Structures Congress, March 10-13, 2021 Seattle, WA, USA.
Ryan Honerkamp and Guirong Yan (2021), “Validation of CFD Model of Tornado Simulator Using Experiments Conducted on a Gable-roofed Structure.” The 13th International Conference on Structural Safety and Reliability (ICOSSAR 2021), June 21-25, 2021, Shanghai, China.
Yi Zhao, Guirong Yan (2021), “Failure Modes of Low-rise Buildings under Multi-vortex Tornadoes.” SEI and ASCE Structures Congress, March 10-13, 2021 Seattle, WA, USA.
Yi Zhao, Guirong Yan (2021) “Size Effect on Wind Loads Induced by Multi-vortex Tornadoes on Low-rise Buildings.” The 13th International Conference on Structural Safety and Reliability (ICOSSAR 2021), June 21-25, 2021, Shanghai, China.
Zhi Li, Guirong Yan (2021), “Proper Determination of Designing Tornadic Wind Loading on Civil Structures.” SEI and ASCE Structures Congress, March 10-13, 2021 Seattle, WA, USA.
Zhi Li and Guirong Yan (2021), “Investigation of Wind Effects on Bridges Induced by Tornadoes.” The 13th International Conference on Structural Safety and Reliability (ICOSSAR 2021), June 21-25, 2021, Shanghai, China.
Hou, P., Nah, F., Yan, G., Stone, N., and Sabharwal, C. (2020), “Effect of Virtual Reality Immersiveness on Protection Motivation of Tornado Hazards,” International Conference on Information Systems (ICIS) TREOs, December 2020
Ryan Honerkamp and Guirong Yan (2020), “Reveal bluff-body aerodynamics on low-rise buildings under tornadoes using “numerical” laboratory tornado simulator.” 9th International Colloquium on Bluff Body Aerodynamics and Applications (BBAAIX), July 20-23, 2020, Birmingham, UK.
Yi Zhao, Guirong Yan (2020). “Wind effects induced by multi-vortex tornadoes on a low-rise building.” 9th International Colloquium on Bluff Body Aerodynamics and Applications (BBAAIX), July 20-23, 2020, Birmingham, UK.
S. J. Patel and M. Zawodniok, "DNN-Based RFID Antenna Tags Localization," 2021 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 2021, pp. 1-6, doi: 10.1109/I2MTC50364.2021.9460004.
A. M. M. Chandran, M. Zawodniok and A. Adekpedjou, "Targeted Learning for the Dynamic Selection of Channel Estimation Methodology," 2020 IEEE International Conference on Smart Computing (SMARTCOMP), Bologna, Italy, 2020, pp. 250-252. doi: 10.1109/SMARTCOMP50058.2020.00055
A. Khanda, F. Coro, F. Betti Sorbelli, C. M. Pinotti, and S. K. Das, “Efficient Route Selection for Drone-based Delivery Under Time-varying Dynamics,” IEEE 18th International Conference on Mobile Ad Hoc and Smart Systems (MASS), 2021.
F. Betti Sorbelli, F. Corò, S. K. Das, L. Palazzetti and C. M. Pinotti, “Truck-Drone Scheduling Approach for Last-Mile Deliveries,” International Conference on Theoretical Computer Science (ICTCS), June 2021.
Non-refereed conference papers or abstracts in proceedings
Schnitzler, M. A., Dagli, C., Canfield, C., Dzebisashvili, N., Varma, C., Axelrod, D., Lentine, K., Ouseph, R., & Randall, H. (2020). Using Artificial Intelligence Tools for Identification of High-Risk Transplant Recipients for Focused Management. American Journal of Transplantation, 20(suppl 3), 283–284. (extended abstract published from American Transplant Congress)
“Developing Meta Systems Architectures for Leading Innovation with Complex Societal and Technical Challenges”, NDIA Virtual Systems and Mission Engineering Conference, November 1-13, 2020.
Thakur, A. R., Pappas, J. M. and Dong, X., "Large-Scale Additive Manufacturing of High Strength Fiber-Reinforced Polymer Composites," SAMPE 2021, Virtual Conference, USA, June 2021.
Pappas, J. M., Kinzel, E. C., and Dong, X., "Fabrication and Characterization of Transparent Spinel Ceramics Prepared by Laser Direct Deposition," ICALEO 2020, Virtual Conference, USA, October 2020.
Pappas, J. M. and Dong, X., "Effects of Processing Conditions on Laser Direct Deposited Alumina Ceramics," MSEC 2020 - Virtual Conference, September 2020.
Thakur, A. R., Leu, M. C., and Dong, X., "Feasibility and Characterization of Large-Scale Additive Manufacturing with Long Fiber Reinforced Composites," MSEC 2020 - Virtual Conference, September 2020.
Daoru Han, Henry Pernicka, and Leslie Gertsch. A Large Thermal-Vacuum-Plasma Facility to Simulate Lunar Extreme Environments. In Lunar Surface Innovation Consortium (LSIC) Fall Meeting 2020, Virtual, October 14 - 15, 2020.
T.W. McGarvey, J.D. Burch, S. Koluch, E. Stafford, and D. Han. Simulating Solar Wind Plasma Environment in a Vacuum Chamber. In 2021 NASA Exploration Science Forum & European Lunar Symposium, Virtual, July 20 - 23, 2021.
T. Hall and A. Krolikowski. “National Responses to the Huawei 5G Controversy: Policy in Germany, Japan, and the United Kingdom.” American Political Science Association annual conference. 2020.
Baitang Jin, Zeyu Shang, Shiguang Li, and Xinhua Liang, Reforming of methane with carbon dioxide over cerium oxide promoted nickel nanoparticles deposited on 4-channel hollow fibers by atomic layer deposition, 2020 Virtual AIChE Annual Meeting, November 16-20, 2020
Amanda Hoskins, Samantha L. Millican, William McNeary IV, Annika Lai, Xinhua Liang, Yan Gao, Charles B. Musgrave, and Alan W. Weimer, Improved understanding of the role of ultra-thin particle-ALD films on lithium metal oxide cathode particles, 2020 Virtual AIChE Annual Meeting, November 16-20, 2020
Xiao Fan, Shoujie Ren, Baitang Jin, Shiguang Li, Miao Yu, and Xinhua Liang, Roles of interaction between components in CuO-ZnO-ZrO2-Al2O3/HZSM-5 bifunctional catalysts for direct synthesis of dimethyl ether via CO2 hydrogenation, 2020 Virtual AIChE Annual Meeting, November 16-20, 2020 (poster)
Ye Jin, Han Yu, Yan Gao, and Xinhua Liang, Ultrathin Al-doped ZnO films coated Li4Ti5O12 as an anode material with excellent cycling stability and rate capability for lithium-ion batteries, 2020 Virtual AIChE Annual Meeting, November 16-20, 2020 (poster)
Ekanayake, R. and Samaranayake, VA. Bootstrap Prediction Intervals for Fractionally Integrated Generalized Autoregressive Conditionally Heteroscedastic (FIGARCH) Models. In JSM Proceedings, Business and Economic Statistics Section, Alexandria, VA, American Statistical Association. 2020; :1312 – 1325.
Ratnayake, I., and Samaranayake, VA. Generalized Feedback Asymmetric Conditional Autoregressive Range Model. In JSM Proceedings, Business and Economic Statistics Section, Alexandria, VA, American Statistical Association. 2020; :1326 – 1279.
Samaranayake, VA. and Zhang, Y. Autoregressive Conditional Heteroscedastic Hidden Markov Model. In JSM Proceedings, Business and Economic Statistics Section, Alexandria, VA, American Statistical Association. 2020; :2918 – 1340.
Wen HM, Hoffman AK, Arivu M, Islamgaliev RK, “Development and qualification of ultra-fine grained and nanocrystalline steels for nuclear applications”, presentation, 2021 TMS Annual Meeting, March 14–18, virtual meeting.
Wen HM, Bratten A, Jalan V, “Oxidation Behavior of TRISO Fuel Materials”, invited talk, 2021 TMS Annual Meeting, March 14–18, virtual meeting.
Donald C. Wunsch II, “Multidisciplinary Innovation, Biological Inspiration, Engineering, and Kunihiko Fukushima: Lessons Learned,” Neural Networks for Machine Learning: A Symposium to Honor Kunihiko Fukushima, Recipient of the 2021 Bower Award and Prize for Achievement in Science, The Franklin Institute, Philadelphia, April 28, 2021.
Donald C. Wunsch II, Trustworthy Autonomous Systems Engineering, invited panel presentation, Cyber-Physical Systems Principal Investigators’ Meeting, Washington University in St. Louis, June 4, 2021.
S. Patel, M. Zawodniok and J. Benesty, "Dcase 2020 task 3: A single stage fully convolutional neural network for sound source localization and detection", DCASE2020 Challenge, July 2020.
F. Fayyazbakhsh, M. Amato, M Khayat, D. E. Day, Y. W. Huang, M. C. Leu, “3D Bioprinting of Cell-Laden Scaffolds for Skin Substitutes,” 2021 Annual International Solid Freeform Fabrication Symposium (Solid Freeform Fabrication Symposium 2021)
F. Fayyazbakhsh, M Khayat, M. Amato, D. E. Day, M. C. Leu “In-vivo Evaluation of 3D Printed Hydrogel Wound Dressings for Burn Wound Healing,” 6th World Congress of the Tissue Engineering and Regenerative Medicine International Society (TERMIS 2021)
2020
Refereed Conference Papers
M. Lucic, H. Ghazzai, A. Alsharoa, and Y. Massoud, “A Latency-Aware Task Offloading in Mobile Edge Computing Network for Distributed Elevated LiDAR”, in proc. of IEEE International Symposium on Circuits and Systems (ISCAS), Seville, Spain, May 2020. https://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=9180527
Canfield, C., Egbue, O., Hale, J., & Long, S. (2019). Opportunities and Challenges for Rural Broadband Infrastructure Investment. Proceedings of the American Society for Engineering Management. https://search.proquest.com/docview/2358191529?pq-origsite=gscholar&fromopenview=true
Legaspi, J., Canfield, C., Gill, K., Bhada, S., & Wyglinski, A. (2020). Integrated Agent-Based Model for Broadband Resource Allocation Analysis. Proceedings of the IEEE Vehicular Technology Conference. https://ieeexplore.ieee.org/abstract/document/9129189
Meinders, R., Ganguly, S. and Chandrashekhara, K., "Modeling and Simulation of Polymer Composite Prepreg Forming Process," Proceedings of the Composites and Advanced Materials Expo (CAMX) Conference, Paper No. TP19-0752, pp.1 - 11, Anaheim, CA, September 23 - 26, 2019. https://scholarsmine.mst.edu/mec_aereng_facwork/4487/
Dasari, S., Rangapuram, M., Chandrashekhara, K., Iyyer, N. and Phan, N., "Multiphysics Prediction Model of Microwave Curing for Thick Polymer Composites," Proceedings of the Composites and Advanced Materials Expo(CAMX) Conference, Paper No. TP19-0754, pp. 1 - 14, Anaheim, CA, September 23 - 26, 2019. https://scholarsmine.mst.edu/masters_theses/7942/
Fashanu, O., Murphy, D., Spratt, M., Newkirk, J., Chandrashekhara, K., Brown, B. and Porter, J., "Modeling and Characterization of Stress-Assisted Thermo-Oxidation of Bismaleimide Composites," Proceedings of the 30th Solid Freeform Fabrication Symposium, pp. 1 - 7, Austin, TX, August 12 - 14, 2019. https://scholarsmine.mst.edu/doctoral_dissertations/2759/
Murphy, D., Fashanu, O., Spratt, M., Newkirk, J., Chandrashekhara, K., Heath, M. and Klenosky, D., "Compressive and Bending Performance of Selectively Melted AlSi10Mg Structures," Proceedings of the 30th Solid Freeform Fabrication Symposium, pp. 1 - 11, Austin, TX, August 12 - 14, 2019. http://utw10945.utweb.utexas.edu/sites/default/files/2019/181%20Compressive%20and%20Bending%20Performance%20of%20Selectively.pdf
Spratt, M., Newkirk, J., and Chandrashekhara, K., “Design and Fabrication of Metal Matrix Syntactic Foams by Low-Pressure Injection Molding,” Proceedings of the 11th International Conference on Porous Metals and Metallic Foams (MetFoam), pp. 1-10, Dearborn, MI, August 20–23, 2019. https://link.springer.com/chapter/10.1007/978-3-030-42798-6_9
Kanwar, B., Corns, S.M., Shoberg, T., and Long, S. (2019) “Predictive Deep Learning for Flood Evacuation Planning and Routing,” Proceedings of the American Society for Engineering Management 2017 International Annual Conference, Philadelphia, PA, October, 2019. https://spexternal.modot.mo.gov/sites/cm/CORDT/cmr20-002.pdf
Paden, J. and Corns, S.M. (2019) “Intertwined Neural Networks for Number Recognition,” Proceedings of the American Society for Engineering Management 2017 International Annual Conference, Philadelphia, PA, October, 2019.
Gude, V., Corns, S.M., Shoberg, T., and Long, S. (2019) “Reinforcement Learning Framework for Road Restoration Planning,” Proceedings of the American Society for Engineering Management 2017 International Annual Conference, Philadelphia, PA, October, 2019.
* F. Betti Sorbelli, F. Corò, S. K. Das, A. Navarra, and C. M. Pinotti, “Speeding-up Routing Schedules on Aisle-Graphs,” Int’l Conference on Distributed Computing in Sensor Systems (DCOSS), May 2020. https://ieeexplore.ieee.org/document/9183614
F. De Vita, D. Bruneo, and S. K. Das, “A Novel Data Collection Framework for Telemetry and Anomaly Detection in Industrial IoT Systems,” ACM/IEEE Conference on Internet of Things Design and Implementation (IoTDI), Sydney, Australia, pp. 245-251, Apr 2020. https://ieeexplore.ieee.org/document/9097595
* S. Roy, N. Ghosh, P. Ghosh, and S. K. Das, “bioMCS: A Bio-inspired Collaborative Data Transfer Framework over Fog Computing in Mobile Crowdsensing,” 21st ACM International Conference on Distributed Computing and Networking (ICDCN), 23:1-23:10, Jan 2020. (Best Paper Candidate) https://www.researchgate.net/publication/339372367_bioMCS_A_Bio-inspired_Collaborative_Data_Transfer_Framework_over_Fog_Computing_Platforms_in_Mobile_Crowdsensing
A. Di Stefano, D. Di Francesco Maesa, S. K. Das, and P. Lio’, “Resolution of Blockchain Conflicts through Heuristics-based Game Theory and Multilayer Network Modeling,” 21st ACM International Conference on Distributed Computing and Networking, 1:1-1:10, Jan 2020. https://dl.acm.org/doi/10.1145/3369740.3372914
S. Halder, M. Conti, and S. K. Das, “COIDS: A Clock Offset Based Intrusion Detection System for Controller Area Networks,” 21st ACM International Conference on Distributed Computing and Networking, 22:1-22:10, Jan 2020. https://dl.acm.org/doi/10.1145/3369740.3369787
Y. S. Patel, S. Banerjee, R. Misra, and S. K. Das, “Low-Latency Energy-Efficient Cyber-Physical Disaster System Using Edge Deep Learning,” 21st ACM Int’l Conf. on Distributed Computing and Networking, 34:1-34:6, Jan 2020. https://dl.acm.org/doi/10.1145/3369740.3372752
* A. Pratap, F. Concone, V. S. S. Nadendla,, and S. K. Das, “Three-Dimensional Matching based Resource Provisioning for the Design of Low-Latency Heterogeneous IoT Networks,” 22nd ACM International Conference on Modeling, Analysis and Simulation of Wireless and Mobile Systems (MSWiM), Miami, USA, pp. 79-86, Nov 2019. https://dl.acm.org/doi/10.1145/3345768.3355906
V. K. Shah, S. Roy, S. Silvestri, and S. K. Das, “Bio-DRN: Robust and Energy-efficient Bio-inspired Disaster Response Networks,” 16th IEEE Int’l Conf. on Mobile Ad-hoc and Smart Systems (MASS), Nov. 2019. https://ieeexplore.ieee.org/abstract/document/9077510
A. Pratap, S. Singh, S. Satapathy, and S. K. Das, “Maximizing Joint Data Rate and Resource Efficiency in D2D-IoT Enabled Multi-Tier Networks,” IEEE 44th Conference on Local Computer Networks (LCN), pp. 177-184, Oct 2019. https://ieeexplore.ieee.org/document/8990781
N. Ghosh, R. Singhal, and S. K. Das, “R2Q: A Risk Quantification Framework to Authorize Requests in Web-based Collaborations,” 14th ACM Asia Conference on Information, Computer and Communications Security (ASIACCS), Auckland, New Zealand, pp. 247-254, July 2019. https://dl.acm.org/doi/10.1145/3321705.3329852
F. Rhigetti, C. Vallati, S. K. Das, and G. Anastasi, “An Experimental Evaluation of the 6Top Protocol for Industrial IoT Applications,” 24th IEEE Symposium on Computer and Communications (ISCC), Barcelona, Spain, pp. 1-6, 2019. https://ieeexplore.ieee.org/document/8969590
Thakur, A. R.*, Leu, M. C., and Dong, X.#, "Feasibility and Characterization of Large-Scale Additive Manufacturing with Long Fiber Reinforced Composites," ASME 2020 International Manufacturing Science and Engineering Conference, MSEC2020-8257, 2020, Cincinnati, Ohio.
Pappas, J. M.* and Dong, X.#, "Effects of Processing Conditions on Laser Direct Deposited Alumina Ceramics," ASME 2020 International Manufacturing Science and Engineering Conference, MSEC2020-8260, 2020, Cincinnati, Ohio, USA.
Pappas, J. M.* and Dong, X.#, "Characterization of Laser Direct Deposited Magnesium Aluminate Spinel Ceramics," 2019 Solid Freeform Fabrication Symposium Proceedings (SFF Symp 2019), 2019, Austin, Texas, USA.
Thakur, A. R.*, Pappas, J. M.*, and Dong, X.#, "Fabrication and Characterization of High-Purity Alumina Ceramics Doped with Zirconia via Laser Direct Deposition," 2019 Solid Freeform Fabrication Symposium Proceedings (SFF Symp 2019), 2019, Austin, Texas, USA.
H. Alharkan, S. Saadatmand, P. Shamsi, and M. Ferdowsi, “Q-learning scheduling for tracking current control of switched reluctance motor drives,” in Proc. IEEE Power and Energy Conference at Illinois (PECI), Champaign, IL, February 2020, pp.
S. Saadatmand, H. Alharkan, P. Shamsi, and M. Ferdowsi, “Value gradient learning approach in power and frequency regulation of grid-connected synchronverters,” in Proc. IEEE Power and Energy Conference at Illinois (PECI), Champaign, IL, February 2020, pp.
S. Saadatmand, M.S. Sanjari Nia, P. Shamsi, and M. Ferdowsi, “The voltage regulation of a Buck converter using a neural network predictive controller,” in Proc. IEEE Texas Power and Energy Conference (TPEC), College Station, TX, February 2020, pp.
S. Saadatmand, M.S. Sanjari Nia, P. Shamsi, and M. Ferdowsi, “The heuristic dynamic programming approach in Boost converters,” in Proc. IEEE Texas Power and Energy Conference (TPEC), College Station, TX, February 2020, pp. (Second Place Paper Award)
D. Shah, B. Baddipadiga, M. Crow, and M. Ferdowsi, “A solid state transformer model for proper integration to distribution networks,” in Proc. IEEE 51st North American Power Symposium (NAPS), Wichita, KS, Oct. 2019, pp.
M. Altimania, M.S. Sanjari Nia, M. Ferdowsi, and P. Shamsi, “Analysis and modeling of a non-isolated two-phase interleaved boost converter with diode-capacitor cells in the DCM,” in Proc. IEEE 51st North American Power Symposium (NAPS), Wichita, KS, Oct. 2019, pp.
M.S. Sanjari Nia, S. Saadatmand, M. Altimania, P. Shamsi, and M. Ferdowsi, “Analysis of skin effect in high frequency isolation transformers,” in Proc. IEEE 51st North American Power Symposium (NAPS), Wichita, KS, Oct. 2019, pp.
M.S. Sanjari Nia, S. Saadatmand, M. Altimania, P. Shamsi, and M. Ferdowsi, “Analysis of various transformer structures for high frequency isolation applications,” in Proc. IEEE 51st North American Power Symposium (NAPS), Wichita, KS, Oct. 2019, pp.
S. Saadatmand, M.S. Sanjari Nia, P. Shamsi, M. Ferdowsi, and D. Wunsch, “Neural network predictive controller for grid-connected virtual synchronous generator,” in Proc. IEEE 51st North American Power Symposium (NAPS), Wichita, KS, Oct. 2019, pp.
S. Saadatmand, M.S. Sanjari Nia, P. Shamsi, M. Ferdowsi, and D. Wunsch, “Heuristic dynamic programming for adaptive virtual synchronous generators,” in Proc. IEEE 51st North American Power Symposium (NAPS), Wichita, KS, Oct. 2019, pp.
S. Saadatmand, M.S. Sanjari Nia, P. Shamsi, and M. Ferdowsi, “Dual heuristic dynamic programing control of grid-connected synchronverters,” in Proc. IEEE 51st North American Power Symposium (NAPS), Wichita, KS, Oct. 2019, pp.
David Lund, Jianxun Zhao, Alexander Lamb, and Daoru Han. Fully Kinetic PIFE-PIC Simulations of Plasma Charging at Lunar Craters. In AIAA SciTech 2020, AIAA 2020-1549, Orlando, Florida, January 6-10, 2020. doi:10.2514/6.2020-1549
Jianxun Zhao, Xinpeng Wei, Zhangli Hu, Xiaoming He, Daoru Han, Zhen Hu, and Xiaoping Du. Photoelectron Sheath near the Lunar Surface: Fully Kinetic Modeling and Uncertainty Quantification Analysis. In AIAA SciTech 2020, AIAA 2020-1548, Orlando, Florida, January 6-10, 2020. doi:10.2514/6.2020-1548
Blake A. Folta, Terence W. McGarvey IV, Joseph C. Faudel, Kyle R. McMillen, and Daoru Han. Development and Characterization of an Ion Source to Simulate Solar Wind Plasma in a Vacuum Chamber. In AIAA SciTech 2020, AIAA 2020-0048, Orlando, Florida, January 6-10, 2020. doi:10.2514/6.2020-0048
Qing Tang#, Yanqiu Cheng##, Xianbiao Hu, Chenxi Chen#, Yang Song#. Field Testing and Evaluation of Leader-Follower Autonomous Truck Mounted Attenuator Vehicle System for Work Zone Maintenance. Transportation Research Board 99th Annual Meeting, Washington DC. 2020.
Qing Tang#, Yanqiu Cheng##, Xianbiao Hu. Quantification of Traffic Impact by Leader-Follower Autonomous Truck Mounted Attenuator Vehicle System for Work Zone Maintenance. Transportation Research Board 99th Annual Meeting, Washington DC. 2020.
Yanqiu Cheng##, Xianbiao Hu, Qing Tang#, Hongsheng Qi. A Model-Free Approach for Connected and Autonomous Vehicles Trajectory Scheduling: Monte Carlo Tree Search-Based Mixed Traffic Flow Control Algorithm. Transportation Research Board 99th Annual Meeting, Washington DC. 2020.
Yajuan Deng, Meiye Li, Xianbiao Hu. Route Choice Behavior Analysis Considering Heterogenous Travel Distances Using Occupied Taxi Trajectory Data. Transportation Research Board 99th Annual Meeting, Washington DC. 2020.
Yang Song#, Xianbiao Hu. Initial State of Charge (SOC)-Focused Electric Vehicles Driver Charging Behavior Analysis. The 3rd International Symposium on Multimodal Transportation. National University of Singapore, Singapore. 2019
Qing Tang#, Xianbiao Hu. Modeling Individual Travel Time with a Back Propagation Neural Network Approach for Advanced Traveler Information Systems. Mobil. TUM 2019, International Scientific Conference on Mobility and Transport. 2019.
Zhu and J. Huang, "Smart Fiber-optic Inclinometer." Conference on Lasers and Electro-Optics (CLEO), web conference, May 2020.
Liu, I. Jasim, C. Zhu, M. Roman, E. Kinzel, J. Huang, and M. Almasri. "Microsphere Photolithography Patterning of Plasmonic Sensors on Optical Fiber." In 2019 IEEE Research and Applications of Photonics in Defense Conference (RAPID), pp. 1-2. IEEE, 2019.
H. Mehdipourpicha, R. Bo, H. Chen, M. Rana, J. Huang, "Transformer Fault Diagnosis Using Deep Neural Network", 2019 Innovative Smart Grid Technologies Asia (ISGT Asia), Chengdu, China, 2019
Johnson, N. Capps, C. Zhu, JH. Hsu, J. Goldstein, R. Brow, J. Huang, D. Bristow, R. Landers, and E.C. Kinzel. "Direct write of photonics using a filament-fed laser-heated process." In Laser 3D Manufacturing VI, vol. 10909, p. 109090Q. International Society for Optics and Photonics, 2019.
Zhong, W. Song, C. Kim, C. Park and C. Hwang, “Coupling Path Visualization for Automotive Intentional Electromagnetic Interference” Asian Electromagnetics Conference (ASIAEM), Xi’an, China, Sep. 16-20, 2019.
Sun, J. Kim and C. Hwang, “Jitter-aware Target Impedance” IEEE Symp. Electromagnetic Compatibility, Signal Integrity and Power Integrity (EMC+ SIPI), New Orleans, LA, July 22-26, 2019, pp. 217-222.
Sun, J. Zhang, Z. Yang, C. Hwang, S. Wu, “Simulation Investigation on Acoustic Noise caused by “Singing” Capacitors on Mobile Devices” IEEE Symp. Electromagnetic Compatibility, Signal Integrity and Power Integrity (EMC+ SIPI), New Orleans, LA, July 22-26, 2019, pp. 406-410.
Walunj, F. Ma, T. Makharashvili, R. He, C. Hwang, D. Beetner, B. Booth, K. Martin, “Experimental Characterization of the Common-mode Current Sources in a Cable Harness” IEEE Symp. Electromagnetic Compatibility, Signal Integrity and Power Integrity (EMC+ SIPI), New Orleans, LA, July 22-26, 2019, pp. 292-297.
Huang, Y. Zhong, Z. Sun, T. Enomoto, S. Seto, K. Araki, J. Fan and C. Hwang, “Reciprocity Theorem Based RFI Estimation for Heatsink Emission” IEEE Symp. Electromagnetic Compatibility, Signal Integrity and Power Integrity (EMC+ SIPI), New Orleans, LA, July 22-26, 2019, pp. 590-594.
Xu, S. Bai, B. Zhao, K. Nalla, M. Sapozhnikov, J. L. Drewniak, C. Hwang, and J. Fan, “A Novel System-Level Power Integrity Transient Analysis Methodology using Simplified CPM Model, Physics-based Equivalent Circuit PDN Model and Small Signal VRM Model” IEEE Symp. Electromagnetic Compatibility, Signal Integrity and Power Integrity (EMC+ SIPI), New Orleans, LA, July 22-26, 2019, pp. 205-210.
Zhang, Z. Zhang, C. Huang, H. Deng, H. Lin, B. C. Tseng, J. Drewniak, and C. Hwang, “Decoupling Capacitor Selection Algorithm for PDN Based on Deep Reinforcement Learning” IEEE Symp. Electromagnetic Compatibility, Signal Integrity and Power Integrity (EMC+ SIPI), New Orleans, LA, July 22-26, 2019, pp. 616-620.
Xu, S. Bai, B. Zhao, K. Nalla, M. Sapozhnikov, J. L. Drewniak, C. Hwang, and J. Fan, “Power Delivery Network Optimization Approach using an Innovative Hybrid Target Impedance” IEEE Symp. Electromagnetic Compatibility, Signal Integrity and Power Integrity (EMC+ SIPI), New Orleans, LA, July 22-26, 2019, pp. 211-216.
Sun, J. Zhang, Z. Yang, C. Hwang, S. Wu, “Measurement Investigation on Acoustic Noise caused by “Singing” Capacitors on Mobile Devices” IEEE Symp. Electromagnetic Compatibility, Signal Integrity and Power Integrity (EMC+ SIPI), New Orleans, LA, July 22-26, 2019, pp. 505-510.
Zhong, W. Song, C. Kim, C. Park and C. Hwang, “Efficient Automotive Simulation Using Reciprocity for Intentional Electromagnetic Interference” IEEE Symp. Electromagnetic Compatibility, Signal Integrity and Power Integrity (EMC+ SIPI), New Orleans, LA, July 22-26, 2019, pp. 600-604.
V. R. Chowdhury, K. J. Prasad Veeramraju, J. Li, J. Park, R. Landers, and J. W. Kimball, “Battery Degradation Modeling and Optimal Usage in a Microgrid Using Markov Decision Process,” in 2019 North American Power Symposium (NAPS), Oct. 2019, pp. 1–6, doi: 10.1109/NAPS46351.2019.9000375.
K. J. P. Veeramraju and J. W. Kimball, “An Improved Method for the Practical Determination of Core and Copper Losses in High Frequency Switchmode Transformers,” in 2019 North American Power Symposium (NAPS), Oct. 2019, pp. 1–5, doi: 10.1109/NAPS46351.2019.9000251.
V. R. Chowdhury and J. W. Kimball, “Grid Voltage Estimation and Feedback Linearization based Control of a Three phase Grid Connected Inverter under Unbalanced Grid Conditions with LCL Filter,” in 2019 IEEE Energy Conversion Congress and Exposition (ECCE), Sep. 2019, pp. 2979–2984, doi: 10.1109/ECCE.2019.8912226.
K. J. Prasad Veeramraju and J. W. Kimball, “An Improved Power Processing Unit for Multi-Mode Monopropellant Electrospray Thrusters for Satellite Propulsion Systems,” in 2019 IEEE Energy Conversion Congress and Exposition (ECCE), Sep. 2019, pp. 1302–1309, doi: 10.1109/ECCE.2019.8913026.
Vanfossan, Samuel (2019). “A Geometrically-Based Method for Efficient Many Objective Decision-Making,” Proceedings of the American Society for Engineering Management 2019 International Annual Conference E. Schott, H. Keathley, and C. Krejci, eds https://search.proquest.com/docview/2358191342?pq-origsite=gscholar
Vanfossan, S., Dagli, C., Kwasa, B. “An Agent-Based Approach to Artificial Stock Market Modeling,” Complex Adaptive Systems Conference with Theme: Leveraging AI and Machine Learning for Societal Challenges, CAS 2019
“A Region-Based Deep Learning Algorithm for Detecting and Tracking Objects in Manufacturing Plants,” M. M. Karim, D. Doell, R. Lingard, Z. Yin, M. C. Leu, and R. Qin, Proceeding of 25th International Conference on Production Research Manufacturing Innovation: Cyber Physical Manufacturing, Chicago, IL, Aug. 9–14, 2019.
“Action Recognition in Manufacturing Assembly using Multimodal Sensor Fusion,” M. Al-Amin, W. Tao, D. Doell, R. Lingard, Z. Yin, M. C. Leu, and R. Qin, Proceeding of 25th International Conference on Production Research Manufacturing Innovation: Cyber Physical Manufacturing, Chicago, IL, Aug. 9–14, 2019.
“A Brief Review on 3D Bioprinted Skin Substitutes,” F. Fayyazbakhsh and M. C. Leu, Procedia Manufacturing, Vol. 48, 2020.
“Real-Time Assembly Operation Recognition with Fog Computing and Transfer Learning for Human-Centered Intelligent Manufacturing,” W. Tao, M. Al-Amin, H. Chen, M. C. Leu, Z. Yin, and R. Qin, Procedia Manufacturing, Vol. 48, Jun. 2020.
“Feasibility and Characterization of Large-Scale Additive Manufacturing with Long Fiber Reinforced Composites,” R. Thakur, M. C. Leu, and X. Dong, Proceedings of the ASME 2020 Manufacturing Science and Engineering Conference (MSEC 2020), Jun. 22-26, 2020, Cincinnati, OH.
Mohammad Masud Parvez, Yitao Chen, Frank Liou, Joseph Newkirk, “Comparison of Fatigue Performance Between Additively Manufactured and Wrought 304L Stainless Steel Using a Novel Fatigue Test Setup,” Proceedings of the 30th Solid Freeform Fabrication Symposium, Austin, Texas, August 12-14, 2019.
Bharadwaja Ragampeta, Aravind Murugan, Yitao Chen, Frank Liou, “Application of Schlieren Technique in Additive Manufacturing : A Review,” Proceedings of the 30th Solid Freeform Fabrication Symposium, Austin, Texas, August 12-14, 2019.
Mugdha Joshi, Aaron Flood, Todd Sparks, FueWen Liou, “Applications of Supervised Machine Learning Algorithms in Additive Manufacturing: A Review,” Proceedings of the 30th Solid Freeform Fabrication Symposium, Austin, Texas, August 12-14, 2019.
Xinchang Zhang, Frank Liou, “Part Remanufacturing Using Hybrid Manufacturing Processes,” Proceedings of the 30th Solid Freeform Fabrication Symposium, Austin, Texas, August 12-14, 2019.
Aaron Flood and Frank Liou, “Simulated Effect of Laser Beam Quality on the Robustness of Laser-based AM System,” Proceedings of the 30th Solid Freeform Fabrication Symposium, Austin, Texas, August 12-14, 2019.
Xinchang Zhang, Yitao Chen, Tan Pan, Wenyuan Cui, Lan Li, Frank Liou, “Joining of Copper and Stainless Steel 304L Using Direct Metal Deposition,” Proceedings of the 30th Solid Freeform Fabrication Symposium, Austin, Texas, August 12-14, 2019.
Pan, S. Karnati, A. T. Sutton, M. Bennish, and F. F. Liou, “The Impact of Porosity on the Mechanical Properties of 304L Stainless Steel Fabricated by Selective Laser Melting,” Proceedings of the 30th Solid Freeform Fabrication Symposium, Austin, Texas, August 12-14, 2019.
Wenyuan Cui, , Xinchang Zhang, Lan Li, Yitao Chen, Tan Pan, Frank Liou, “Fabrication and characterization of AlxCrCuFeNi2 high-entropy alloys coatings by laser metal deposition,” 25th International Conference on Production Research Manufacturing Innovation, August 9-14, 2019, Chicago, Illinois.
Lan Li, Lei Yan, Aaron Flood, Frank Liou,” Predictive Model for Thermal and Stress Field in Laser Powder Bed Fusion Additive Manufacturing Process –I,” 25th International Conference on Production Research Manufacturing Innovation, August 9-14, 2019, Chicago, Illinois.
Lan Li, Lei Yan, Aaron Flood, Frank Liou,” Predictive Model for Thermal and Stress Field in Laser Powder Bed Fusion Additive Manufacturing Process – II,” 25th International Conference on Production Research Manufacturing Innovation, August 9-14, 2019, Chicago, Illinois.
Vishwa Vijay Kumar and Frank Liou, “Cyber-enabled Product Life cycle Management - A Multi-agent Framework,” 25th International Conference on Production Research Manufacturing Innovation, August 9-14, 2019, Chicago, Illinois.
Zeynalvand, T. Luo, and J. Zhang, “COBRA: Context-aware Bernoulli neural networks for reputation assessment,” 34th AAAI Conference on Artificial Intelligence(AAAI), New York, NY, Feb 7-12, 2020, pp. 7317-7324.
Lv, C. Zhang, Z. Zheng, T. Luo, F. Wu and G. Chen, “Mechanism design with predicted task revenue for bike sharing systems,” 34th AAAI Conference on Artificial Intelligence(AAAI), New York, NY, Feb 7-12, 2020, pp. 2144-2151.
V. Ngo, H. Chaouchi, T. Luo, and T. Quek, “Adaptive Anomaly Detection for IoT Data in Hierarchical Edge Computing,” 34th AAAI Conference on Artificial Intelligence(AAAI), 2nd AIoT Workshop, New York, NY, Feb 2020.
Luo and S. K. Das, “Scalable Distributed Machine Learning with Huge Data for IoT and Scientific Discovery,” National Science Foundation (NSF) Large Scale Networking Workshop on Huge Data, Chicago, IL, April 13-14, 2020.
Yasin Kabir and Sanjay Madria, A Deep Learning Approach for Tweet Classification and Rescue Scheduling for Effective Disaster Management, in proceedings of 27th ACM SIGSPATIAL International Conference on Advances in Geographic Information Systems (ACM SIGSPATIAL), 2019, Chicago, USA.
Xiaofei Cao and Sanjay Madria, Efficient Geospatial Data Collection in IoT Networks for Mobile Edge Computing, in in proceedings of 18th IEEE International Symposium on Network Computing and Applications (NCA), 2019, USA.
Xiaofei Cao and Sanjay Madria, A Testbed for Data Routing in Low-power WSNs using DV-Hop based Trajectory Encoding Algorithm, in IEEE proceedings of 38th IEEE Symposium on Reliable Distributed Systems (SRDS 2019), France, 2019.
Md. Azharul Islam and Sanjay Madria, A Permissioned Blockchain based Access Control System for IOT, in proceedings of IEEE Blockchain 2019, USA.
Amartya Sen, Kenneth Fletcher and Sanjay Madria, A Secure User-Centric Framework for Dynamic Service Provisioning in IoT Environments, in proceedings of 18th IEEE TrustCom, New Zealand, 2019.
San Yeung, H M Aziz and Sanjay Madria, Activity-based Shared Mobility Model for Smart Transportation, in IEEE proceedings of International Workshop on Mobility Data Analytics for Smart Cities, held with 20th IEEE International Conference on Mobile Data Management (MDM), Hong Kong, 2019.
Xiaofei Cao and Sanjay Madria, An Efficient Trajectory-based Routing using Virtual Coordinates for Low-Power WSNs with Mobile Sinks, in proceedings of IEEE International Conference on Distributed Computing in Sensor Systems (DCOSS), 2019, Greece.
Prashant Modekurthy, Abusayeed Saifullah, Sanjay Madria, DistributedHART: A Distributed Real Time Scheduling System for WirelessHART Networks, in the proceedings of IEEE Real-Time and Embedded Technology and Applications Symposium (RTAS), 2019, Montreal, Canada.
Shudip Datta and Sanjay Madria, Efficient Photo Crowdsourcing in Delay-tolerant Networks with Evolving POIs, in 20th IEEE International Conference on Mobile Data Management (MDM), Hong Kong, June, 2019.
Devaguptapu and V. S. S. Nadendla, “On Task Decision Processes based on Discounted Satisficing Heuristic Employed by Crowd Workers,” in 7th AAAI Conference on Human Computation and Crowdsourcing (HCOMP), 2019. Work-in-Progress Paper (Peer-Reviewed)
Pratap, F. Concone, V. S. S. Nadendla, and S. K. Das, “Three-Dimensional Matching Based Resource Provisioning for the Design of Low-Latency Heterogeneous IoT Networks,” in Proceedings of the 22nd International ACM Conference on Modeling, Analysis and Simulation of Wireless and Mobile Systems, MSWIM ’19, p. 79–86, 2019
A. Pratap, R. Gupta, V. S. S. Nadendla, and S. K. Das, “On Maximizing Task Throughput in IoT-Enabled 5G Networks Under Latency and Bandwidth Constraints,” in 2019 IEEE International Conference on Smart Computing (SMARTCOMP), SMARTCOMP’19, pp. 217–224, 2019
J Xue, K Linville, Y Li, PN Godse, S Long, R Qin, J Yan, and L Zhao, “Risk Awareness Enhancement Systems for Hazmat Transportation: Prototyping and Technology Evaluation,” Proceedings of the International Annual Conference of the American Society for Engineering Management, Huntsville, AL, 2019, http://www.asem.org.
M. Moniruzzaman, Z. Yin and R. Qin, "Spatial Attention Mechanism for Weakly Supervised Fire and Traffic Accident Scene Classification," 2019 IEEE International Conference on Smart Computing (SMARTCOMP), Washington, DC, USA, 2019, pp. 258-265, doi: 10.1109/SMARTCOMP.2019.00061.
Moghadam and S. Jagannathan, “Optimal control of linear continuous-time systems in the presence of state and input delays with application to a chemical reactor”, Proc. of American Controls Conference, to appear in June 2020.
Bhowmick and S. Jagannathan, “Availability-resilient control of uncertain linear stochastic networked control systems", Proc. of American Controls Conference, to appear in June 2020.
Raj, S. Jagannathan, T. Yucelen, "Distributed Adaptive State Estimation and Tracking Scheme for Nonlinear Systems Using Active Passive Sensor Networks, Proc. of American Controls Conference, to appear in June 2020.
Bhowmick and S. Jagannathan, “Detection and mitigation of attacks in nonlinear stochastic systems using modified chi square detector”, Proc. of the IEEE Conference on Decision and Control, pp. 139-144, December 2019.
Moghadam and S. Jagannathan, “Approximate optimal adaptive control of partially unknown linear continuous-time systems with state delay”, Proc. of the IEEE Conference on Decision and Control, pp. 1985-1990, December 2019.
Haifeng Niu, C. Bhowmick, A Sahoo and S. Jagannathan, “Attack detection in linear networked control systems by using learning methodology”, of the IEEE Conference on Controls Technology and Applications (CCTA), pp. 148-153, August 2019.
Bhowmick and S. Jagannathan, “Detection of sensor attacks for uncertain stochastic linear systems”, Proc. of the IEEE Conference on Controls Technology and Applications (CCTA), pp. 706-711, August 2019.
Ryan Honerkamp and Guirong Yan (2019), “Investigation of Structural Failure Modes Induced by Tornadoes through Post-event Surveys.” The 9th International Conference on Structural Health Monitoring of Intelligent Infrastructure, August 4-7, 2019, St. Louis, MO, USA
Ryan Honerkamp and Guirong Yan (2019), “High-fidelity CFD Simulation of a Large-scale Laboratory Tornado Simulator by Including Gravity and Translation.” The 15th International Conference on Wind Engineering, September 1-6, 2019, Beijing, China.
Tiantian Li and Guirong Yan (2019), “Improve Wind-induced Structural Responses on a Cable-net Roof Structure by Using Two-way Coupled Wind-structure-interaction Simulations.” The 15th International Conference on Wind Engineering, September 1-6, 2019, Beijing, China.
Tiantian Li, Guirong Yan, Fangping Yuan and Genda Chen (2019), “Non-stationary Characteristics of Tornadoes and Induced Dynamic Impact on a Large-span Dome Structure.” 2019 Structural Congress, April 24-28, 2019, Orlando, FL, USA.
M. Maran Chandran and M. Zawodniok, "Measurement of Internal Self-Interference of USRP family of devices in Full-Duplex Operations," 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Dubrovnik, Croatia, 2020, pp. 1-6, doi: 10.1109/I2MTC43012.2020.9129319.
M. Maran Chandran, M. Zawodniok and A. Phillips, "Convergence Communication over Heterogeneous Mesh Network for Disaster and Underserved Areas," 2020 IEEE 17th Annual Consumer Communications & Networking Conference (CCNC), Las Vegas, NV, USA, 2020, pp. 1-4, doi: 10.1109/CCNC46108.2020.9045227.
Non-Refereed Conference Papers
Stroud, A., Twohy, R., Bai, E., Neill, C., Gugliano, M., & Belfi. A. M. Voluntary and involuntary autobiographical memory retrieval across the lifespan. Abstract in the Proceedings of the Society for Neuroscience meeting, Chicago, IL, October 2019. https://www.abstractsonline.com/pp8/#!/7883/presentation/62970
Belfi, A. M., Kacirek, K. The Famous Melodies Stimulus Set: Development and normative data. Abstract in the Proceedings of the Society for Music Perception and Cognition, New York, NY, August 2019. https://europepmc.org/article/med/32556964
Belfi, A. M. A comparison of methods for analyzing music-evoked autobiographical memories. Abstract in the Proceedings of the Society for Music Perception and Cognition, New York, NY, August 2019. https://online.ucpress.edu/mp/article-abstract/37/5/392/110586/Comparing-Methods-for-Analyzing-Music-Evoked?redirectedFrom=fulltext
Pappas, J., Thakur, A., and Dong, X., "Tailoring Laser Direct Deposited High Purity Alumina Ceramics via Dopants," 2020 TMS Annual Meeting & Exhibition, San Diego, CA, February 2020.
Thakur, A. R. and Dong, X., "Additive Manufacturing of Multifunctional Continuous Carbon Fiber Composites via Coextrusion," 2020 TMS Annual Meeting & Exhibition, San Diego, CA, February
Dong, X., and Thakur, A. R., "Printing with 3D Continuous Carbon Fiber Structural Battery Composites," 2020 Multifunctional Materials and Structures Gordon Research Conference, Ventura, CA, USA, January 2020.
Pappas, J. M. and Dong, X., " Additive Manufacturing of Transparent Armor Ceramics: One-Step Laser Direct Deposited Magnesium Aluminate Spinel Ceramics," 44th International Conference and Exposition on Advanced Ceramics and Composites (ICACC 2020), Daytona Beach, Florida, USA, January 2020.
Pappas, J. M. and Dong, X., "Toughening Additively Manufactured Ceramics by Laser Direct Deposition," 44th International Conference and Exposition on Advanced Ceramics and Composites (ICACC 2020), Daytona Beach, Florida, USA, January 2020.
Dong, X., "Multiscale Modeling of Microstructure Evolution during Laser Direct Deposition of Ceramics," IMECE2019, Salt Lake City, UT, USA, November 2019.
Dong, X., "Genome-based Multiscale Modeling of Crack Formation during Laser Directed Energy Alumina Ceramics Doped with Zirconia via Laser Direct Deposition," 2019 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2019), Austin, TX, USA, August 2019.
Thakur, A. R., Pappas, J. M., and Dong, X., "Fabrication and Characterization of High-Purity Deposition of Alumina Ceramics," 5th World Congress on Integrated Computational Materials Engineering (ICME 2019), Indianapolis, IN, USA, July 2019.
Mills, T., Viviano, A. and Dong, X., "The Five-Axis 3D-Printing of Carbon Fiber Reinforced Composites," 2019 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2019), Austin, TX, USA, August 2019.
Pappas, J. M. and Dong, X., "Characterization of Laser Direct Deposited Magnesium Aluminate Spinel Ceramics," 2019 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2019), Austin, TX, USA, August 2019.
David Lund*, Jianxun Zhao*, Alexander Lamb*, and Daoru Han. Fully Kinetic PIFE-PIC Simulations of Plasma Charging at Lunar Craters. In The 5th Annual Meeting of SIAM Central States Section, Ames, Iowa, October 19 - 20, 2019
Li, Z. Yaqi, H. Pham, X. Liang, R. Panat, J. Park*, “Multiscale controlled three dimensional electrodes for lithium ion batteries”, TMS, San Diego, CA, Feb 23-27, 2020
Saleh, J. Li, J. Park, and R. Panat*, “3D Printed Lithium Ion Batteries and Other Functional Devices”, TMS, San Diego, CA, Feb 23-27, 2020
Pham, J. Park, A unique encapsulation of insoluble powders into nanofibers for electrode composites, 2019 MRS Fall Meeting, Boston, MA, December 1-6, 2019
Zhu, H. Pham, Y. Gao, Y. He, X. Liang, J. Park*, New insights into how ultra-thin coatings improve battery performance, 2019 MRS Fall Meeting, Boston, MA, December 1-6, 2019
M. Ajiboye, J.W. Kimball, R.G. Landers, J. Park*, "A Highly Efficient Computational Model of Energy Storage Systems for Microgrid Applications", 235th ECS Meeting, Dallas, TX, May 26-30, 2019
He, S. Sarkar, X. Liang, J. Park*, "A discovery of an unexpected metal dissolution of thin-coated cathode particles and its theoretical explanation". 235th ECS Meeting, Dallas, TX, May 26-30, 2019
Zhu, J. Li, M. Saleh, R. Panat, J. Park*, “Simulation of Aerosol Jet 3D Printed Electrodes for Lithium-ion Batteries”, 235th ECS Meeting, Dallas, TX, May 26-30, 2019
P. Plateau, S. Sarkar, H. Pham, J. Park*, "Ni-wrapped Carbon Nanofibers for Lithium Ion Batteries", 235th ECS Meeting, Dallas, TX, May 26-30, 2019
Pham, S. Sarkar, J. Park*, “Lead-Carbon Nanofiber Based Anode for High Performance Li-ion Battery”, 235th ECS Meeting, Dallas, TX, May 26-30, 2019
Pham, M. Al-Yasiri, T. Plateau, J. Smith, I. Wolf, J. Park*, “A Novel Cell Design For Enhancing Energy And Power Performance Of Flow Batteries”, 235th ECS Meeting, Dallas, TX, May 26-30, 2019
He, Y. Gao, X. Liang, J. Park*, “Impact of thin coating layers on metal dissolution for battery applications”, 2019 MRS spring meeting & exhibition, Phoenix, Arizona, April 22-26, 2019
T Zhao, Z Yin, R Qin, and G Chen, “Image Data Analytics to Support Engineers' DecisionMaking," Proceedings of the 9th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII-9), St. Louis, MO, August 2019.
M. Moniruzzaman, Z. Yin and R. Qin, "Spatial Attention Mechanism for Weakly Supervised Fire and Traffic Accident Scene Classification," 2019 IEEE International Conference on Smart Computing (SMARTCOMP), Washington, DC, USA, 2019, pp. 258-265, doi: 10.1109/SMARTCOMP.2019.00061.
Wen HM, Hoffman AK, Duan JQ, Arivu M, “Ultrafine-grained and nanocrystalline steels for enhanced mechanical properties and irradiation resistance”, presentation, 2020 TMS Annual Meeting, February 23–27, San Diego, CA.
Hoffman AK, Arivu M, Wen HM, “Severe Plastic Deformation Enhanced Segregation and Precipitation in Nanostructured Steels”, presentation, 2020 TMS Annual Meeting, February 23–27, San Diego, CA.
Hoffman AK, Arivu M, Wen HM, “Enhanced Austenite Stability in Nanostructured Steels During Ion Irradiation”, presentation, 2020 TMS Annual Meeting, February 23–27, San Diego, CA.
Arivu M, Hoffman AK, Duan JQ, Wen HM, “Thermal stability of nanostructured ferritic and austenitic stainless steels”, presentation, 2020 TMS Annual Meeting, February 23–27, San Diego, CA.
Arivu M, Hoffman AK, Wen HM, “Atom Probe Tomography Study of Fission Products in Neutron Irradiated U-Mo Fuel”, presentation, 2020 TMS Annual Meeting, February 23–27, San Diego, CA.
Fu ZQ, Hoffman AK, MacDonald BE, Arivu M, Wen HM, “Atom probe tomography study of an ultrahigh-strength Fe25Ni25Co25Ti15Al10 high-entropy alloy”, poster, 2020 TMS Annual Meeting, February 23–27, San Diego, CA.
Wen HM, Hoffman AK, Islamgaliev RK, “Development and testing of ultrafine-grained and nanocrystalline steels for enhanced irradiation tolerance”, presentation, 2019 Materials in Nuclear Energy Systems, October 6–10, Baltimore, MD, USA.
Arivu M, Luebbe M, Cui WY, Liou F, Wen HM, “Direct laser deposition of cobalt-free high- entropy alloys”, presentation, 2019 Materials Science & Technology Conference, September 29 – October 3, Portland, Oregon.
Luebbe M, Hoffman A, Pommeranke H, He L, Sridharan K, Wen HM, “Effects of Ti and Al Additions on Irradiation Behavior of FeMnNiCr Based High-Entropy Alloys”, presentation, 2019 Materials Science & Technology Conference, September 29 – October 3, Portland, Oregon.
Arivu M, Hoffman A, Duan JQ, Wen HM, “Thermal stability of ultrafine-grained FeCrAl alloy processed by equal-channel angular pressing or high-pressure torsion”, presentation, 2019 Materials Science & Technology Conference, September 29 – October 3, Portland, Oregon.
Pommeranke H, Duan JQ, Luebbe M, Curtis N, Wen HM, “Enhancing the Properties of a Cast FeNiMnCr10 Co-free High-entropy Alloy Through Hot Rolling”, presentation, 2019 Materials Science & Technology Conference, September 29 – October 3, Portland, Oregon.
Pommeranke H, Hoffman A, Curtis N, Wen HM, “Corrosion Behavior of Nanostructured Stainless Steels and High Entropy Alloys”, poster, 2019 Materials Science & Technology Conference, September 29 – October 3, Portland, Oregon.
Bratten A, Duan JQ, Pommeranke H, Wen HM, “Characterization and Oxidation of Graphite and Silicon Carbide in TRISO Nuclear Fuel”, poster, 2019 Materials Science & Technology Conference, September 29 – October 3, Portland, Oregon.
Bratten A, Arivu M, Wen HM, Leu M, “Additive Manufacturing of Silicon Carbide via a Continuous Extrusion Method”, presentation, 2019 Materials Science & Technology Conference, September 29 – October 3, Portland, Oregon.
2019
Refereed Conference Papers
Cullom, T., Landers, R.G., Bristow, D.A., Kinzel, E.C., Johnson, K., Blough, J., Barnard, A., Hartwig, T., and Brown, B., 2019, “In–Situ Laser Excited Frequency Response of Additive Manufactured Parts,” Thirtieth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 12–14, accepted.
Johnson, K., Blough, J., Barnard, A., Hartwig, T, Brown, B., Soine, D., Cullom, T., Kinzel, E.C., Bristow, D.A., and Landers, R.G., 2019, “Dynamic Defect Detection in AM Parts Using FEA Simulation,” Thirtieth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 12–14, accepted.
Lough, C.S., Wang, X., Landers, R.G., Bristow, D.A., and Kinzel, E.C., 2019, “In–Situ Local Part Qualification of SLM 304L Stainless Steel through Voxel Based Processing of SWIR Imaging Data,” Thirtieth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 12–14, accepted.
Fischer, J., Woodside, M., Gonzalez, M., Lutes, N., Bristow, D.A., and Landers, R.G., “Iterative Learning Control of Single Point Incremental Sheet Forming Process using Digital Image Correlation,” SME North American Manufacturing Research Conference, Erie, Pennsylvania, June 10–14.
Gonzalez, M., Lutes, N., Fischer, J., Woodside, M., Bristow, D.A., and Landers, R.G., “Geometric Accuracy and Sheet Thickness Reduction in Multistage Incremental Sheet Forming,” SME North American Manufacturing Research Conference, Erie, Pennsylvania, June 10–14.
Capps, N., Kinzel, E.C., Landers, R.G., and Bristow, D., 2019, “Comparison of Volumetric to Surface Heating for Filament–Fed Laser Heated Additive Manufacturing of Glass,” Summer Heat Transfer Conference, Bellevue, Washington, July 15–18.
Li., H., Bristow, D.A., and Landers, R.G., 2019, “Robustness of A Plant-Inversion Based Switched Iterative Learning Control Scheme,” American Control Conference, Philadelphia, Pennsylvania, July 10–12.
Li, H., Bristow, D.A., and Landers, R.G., 2018, “A Plant–Inversion Based Switched Iterative Learning Control Scheme for a Special Class of Multivariable Systems,” ASME Dynamic Systems and Control Conference, Atlanta, Georgia, September 30 – October 3, paper 9069.
Taylor, G., Anandan, S., Murphy, D., Leu, M. C. and Chandrashekhara, K., "Fracture Toughness of Additively Manufactured Ultem 1010," Proceedings of the Composites and Advanced Materials Expo (CAMX) Conference, PaperNumber TP18-0497, pp. 1 - 11, Dallas, TX, October 16 - 18, 2018.
Gurjot, G. S., Anandan, S., Ganguly, S., Chandrashekhara, K., Bose, M. and Nam, P., "Development and Characterization of Polyurethane Foams with Substitution of Polyether Polyol with Soy-Based Polyol," Proceedings of the Composites and Advanced Materials Expo (CAMX) Conference, Paper Number TP18-0503, pp. 1 - 21, Dallas, TX,October 16 - 18, 2018.
Hussein, R., Fal, M., Abutunis, A., Anandan,S. and Chandrashekhara, K., "Modeling and Characterization of Stress-Assisted Thermo-Oxidation of Bismaleimide Composites," Proceedings of the Composites and Advanced Materials Expo (CAMX) Conference, Paper Number TP18-0506, pp. 1 - 12, Dallas, TX, October 16 - 18, 2018.
Jothibasu, S., Du, Y., Anandan, S., Dhaliwal, G. S., Gerald, R. E., Kaur, A., Watkins, S. E., Chandrashekhara, K. and Huang,J., “Strain Monitoring Using Distributed Fiber Optic Sensors Embedded in Carbon Fiber Composites,” Proceedings of SPIE Smart Structures and Nondestructive Evaluation, Vol. 10958, pp. 1 - 10, Denver, CO, March 4 - 8, 2018.
Spratt, M., Ananadan, S., Hussein, R. M., Newkirk, J., Chandrashekhara, K., Misak, H. and Walker, M., “Effect of Wall Thickness and Build Quality on the Compressive Properties of 304L Thin-walled Structures Fabricated by SLM,” The 29th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, pp. 1 - 8,Austin, TX, August 13 - 15, 2018.
Fashanu, O., Buchely, M. F., Hussein, R., Ananadan, S., Hussein, R. M., Newkirk, J., Chandrashekhara, K., Misak, H. and Walker, M., “Effect of Wall Thickness and Build Quality on the Compressive Properties of 304L Thin-walled Structures Fabricated by SLM,” The 29th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, pp. 1 - 8, Austin, TX, August 13 - 15, 2018.
F. Rhigetti, C. Vallati, S. K. Das, and G. Anastasi, “An Experimental Evaluation of the 6Top Protocol for Industrial IoT Applications,” 24th IEEE Symposium on Computer and Communications (ISCC), Barcelona, Spain, June 2019.
A. Pratap, R. Gupta, V. S. Nadendla, and S. K. Das, “On Maximizing Task Throughput in IoT-enabled 5G Networks under Latency and Bandwidth Constraints,” IEEE Conference on Smart Computing (SmartComp), Washington, DC, June 2019. (Best Paper Candidate)
V. K. Shah, S. Silvestri, B. Luciano, and S. K. Das, “X-CHANT: A Diverse DSA based Architecture for Next-generation Challenged Networks,” IEEE International Conference on Computer Communications (INFOCOM), Paris, France, Apr-May 2019.
N. Li and S. K. Das, “Local View Based Connectivity Search in Online Social Networks,” IEEE INFOCOM Workshop Communications and Networking Aspects of Online Social Networks (CAOS), Paris, Apr 2019.
A. Di Stefano, M. Scatta`, A. Le Corte, S. K. Das, and P. Li`o, “Improving QoE in Multi-layer Social Sensing: A Cognitive Architecture and Game Theoretic Model,” Fourth International Workshop on Social Sensing (SocialSens), in conjunction with ACM/IEEE CPS-IoT Week, Montreal, Canada, pp. 18-23, Apr 2019.
S. Roy, N. Ghosh, and S. K. Das, “bioSmartSense: A Bio-inspired Data Collection Framework for Energy-efficient, QoI-aware Smart City Applications,” IEEE International Conference on Pervasive Computing and Communications (PerCom), Kyoto, Mar 2019.
S. Roy, M. A. Islam, D. Barua, and S. K. Das, “A Scalable Parallel Framework for Multicellular Communication in Bacterial Quorum Sensing,” 11th International Conference on Bio-Inspired Information and Communications Technologies (BICT), Pittsburgh, PA, Mar 2019.
A. Pandey, P. Tiwary, S. Kumar, and S. K. Das, “A Hybrid Classifier Approach to Multivariate Sensor Data for Climate Smart Agriculture Cyber-Physical Systems,” 20th ACM International Conference on Distributed Computing and Networking (ICDCN), pp. 337-341, Jan 2019.
V. K. Shah, S. Roy, S. Silvestri, and S. K. Das, “Towards Energy-efficient and Robust Disaster Response Networks,” International Workshop on Emergency Response Technologies and Services (EmeRTeS), pp. 397-400, Jan 2019.
K. Hazra, V. K. Shah, M. Bilal, S. Silvestri, S. K. Das, S. Nandi, and S. Saha, “A Novel Network Architecture for Resource-Constrained Post-Disaster Environments,” 11th IEEE International Conference on Communication Systems and Networks (COMSNETS), Bangalore, Jan 2019.
A. Pratap. R. Singhal, R. Misra and S. K. Das, “Factor Graph-based Message Passing Technique for Distributed Resource Allocation in 5G Networks” 11th IEEE International Conference on Communication Systems and Networks (COMSNETS), Bangalore, Jan 2019.
Z. Guo, K. Yang, S. Vaidhun, S. Arefin, S. K. Das, and H. Xiong, “Uniprocessor Mixed-Criticality Scheduling with Graceful Degradation by Completion Rate,” 39th IEEE Real-Time Systems Symposium (RTSS), pp. 373-383, Dec 2018.
S. Riazi, S. Srinivasan, S. K. Das, S. Bhowmick, and B. Norris, “Single-Source Shortest Path Tree for Big Dynamic Graphs,” IEEE International Conference on Big Data, Seattle, WA, pp. 4054-4062, Dec 2018.
S. Srinivasan, S. Riazi, B. Norris, S. K. Das, and S. Bhowmick, “A Shared-Memory Parallel Algorithm for Updating Single-Source Shortest Paths in Large Dynamic Networks,” 25th IEEE International Conference on High Performance Computing, Data, and Analytics (HiPC), Bangalore, India, Dec 2018.
V. K. Shah, S. Silvestri, S. Bhattacharjee, and S. K. Das, “An Effective Dynamic Spectrum Access based Network Architecture for Smart Cities,” 4th IEEE Annual International Smart Cities Conference (ISC2), Kansas City, Sep 2018
P. Fajri, N. Lotfi, and M. Ferdowsi, “Development of a series hybrid electric vehicle laboratory test bench with hardware-in-the-loop capabilities,” in Proc. IEEE International Power Electronics Conference (IPEC), Niigata, Japan, Oct. 2018, pp. 3223-3228.
S. Yazdani and M. Ferdowsi, “Hardware co-simulation of voltage sensorless current control based on internal model principle,” in Proc. IEEE Energy Conversion Congress and Exposition (ECCE), Portland, OR, Sept. 2018, pp. 1488-1491.
S. Yazdani and M. Ferdowsi, “Voltage sensorless control of a three-phase standalone inverter based on internal model control,” in Proc. IEEE Energy Conversion Congress and Exposition (ECCE), Portland, OR, Sept. 2018, pp. 1478-1482.
JE. Johnson, N. Capps, C. Zhu, JH. Hsu, J. Goldstein, R. Brow, J. Huang, D. Bristow, R. Landers, and E.C. Kinzel. "Direct write of photonics using a filament-fed laser-heated process." In Laser 3D Manufacturing VI, vol. 10909, p. 109090Q. International Society for Optics and Photonics, 2019.
C. Zhu and J. Huang, “Truly distributed coaxial cable sensing based on random inhomogeneities.” Paper No. 11000-23 SPIE Defense + Commercial Sensing, April 2019
C. Zhu and J. Huang, “Displacement and strain measurement up to 1000 °C using a hollow coaxial cable Fabry-Perot resonator.” Paper No. 11000-22 SPIE Defense + Commercial Sensing, April 2019
C. Zhu and J. Huang, “Optical fiber Fabry-Perot interferometer based embeddable strain sensor with 30 nano-strain resolution.” Paper No. 11000-10 SPIE Defense + Commercial Sensing, April 2019
C. Zhu and J. Huang, “A miniaturized optical fiber tip high-temperature sensor based on concave-shaped Fabry-Perot cavity.” Paper No. 10982-119 SPIE Defense + Commercial Sensing, April 2019
I. Jasim, J. Liu, Y. Yang, C. Qu, C. Zhu, M. Roman, J. Huang, E.C. Kinzel, and M. Almasri “Low-cost fabrication of Functional plasmonic fiber-optic based sensors using microsphere photolithography.” Paper No. 11000-12 SPIE Defense + Commercial Sensing, April 2019
J. Huang, “Compact and robust optical Fabry-Perot interferometers for structural health monitoring”, Paper No.10654-16 SPIE Defense + Commercial Sensing Apr. 2018
L. Chi, M. Huang, A. Pfaff, R.E. Gerald II, J. Huang, and K. Woelk, “NMR hardware and pulse sequences with CapPack™ devices” 59th Experimental Nuclear Magnetic Resonance Conference April 29 - May 4, 2018 Orlando, FL
M. Huang, S. Chen, R. Gerald II, J. Huang, and K. Woelk, “NMR Studies of Loaded Microspheres” 59th Experimental Nuclear Magnetic Resonance Conference April 29 - May 4, 2018 Orlando, FL
R.E. Gerald II, J. Huang, K. Woelk, M. Huang, L. Chi, W. Stoecker, and S. Cartwright, “Acupuncture-MRI Cancer Probe” 59th Experimental Nuclear Magnetic Resonance Conference April 29 - May 4, 2018 Orlando, FL
S. Jothibasu and J. Huang, “Spatially continuous strain monitoring of carbon fiber composites using embedded distributed fiber optic sensors” Paper No. 10598-17 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
Y. Zhuang and J. Huang, “A pendulum based optical fiber inclinometer with nanoradian resolution” Paper No.10598-86 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
C. Zhu and J. Huang, “A three-dimensional sliding and debonding sensor based on triaxial optical fiber Fabry-Perot interferometers Paper No. 10598-122 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
C. Zhu and J. Huang, “An optical fiber extrinsic Fabry-Perot interferometer based displacement sensor with centimeter measurement range” Paper No.10598-131 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
C. Zhu and J. Huang, “Wide-range displacement sensor based on a hollow coaxial cable Fabry-Perot resonator” Paper No.10598-136 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
C. Zhu and J. Huang, “Buckled beam based optical interferometric pressure sensor with low temperature cross-sensitivity” Paper No.10598-137 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
Y. Zhuang and J. Huang, “Frequency domain fiber loop ring-down system for liquid refractive index sensing” Paper No. 10598-144 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
Y. Zhuang and J. Huang, “A high resolution extrinsic Fabry-Perot interferometer-based two-dimensional optical fiber inclinometer” Paper No.10598-145 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
Y. Zhuang and J. Huang, “A novel high temperature sensor based on a hollow coaxial cable Fabry-Perot resonator” Paper No. 10598-146 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
**Y. Du and J. Huang, “A mechanical designed EFPI using buckling beam mechanism for strain sensing Paper No. 10598-147 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
S. Mukherjee, P. Shamsi, M. Ferdowsi, and J. Kimball, "Indirect Grid Current Control of LCL Filter based Grid-Connected Converter," in 2019 IEEE Applied Power Electronics Conference and Exposition (APEC), 2019, pp. 3024–3031.
M. Rasheduzzaman, P. Fajri, J. W. Kimball, and A. A. S. Khan, "Voltage Mode Control of Single-Phase Boost Inverter in $dq$ Reference Frame," in IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society, 2018, pp. 1574–1579.
J. A. Mueller and J. W. Kimball, "Analysis of Soft-Switching Performance for a DC-DC Dual Active Bridge Converter with Randomly Varying Loads," in 2018 IEEE Energy Conversion Congress and Exposition (ECCE), 2018, pp. 4246–4253.
S. Mukherjee, V. R. Chowdhury, and J. Kimball, "Control of a three phase boost rectifier under unbalanced grid conditions without grid voltage sensors," in 2018 IEEE Energy Conversion Congress and Exposition (ECCE), 2018, pp. 1521–1527.
V. R. Chowdhury, S. Mukherjee, and J. Kimball, "A Voltage Sensorless Control of a Three Phase Grid Connected Inverter Based on Lyapunov Energy Function Under Unbalanced Grid Voltage Condition," in 2018 IEEE Energy Conversion Congress and Exposition (ECCE), 2018, pp. 4884–4888.
Cullom, T., Landers, R.G., Bristow, D.A., Kinzel, E.C., Johnson, K., Blough, J., Barnard, A., Hartwig, T., and Brown, B., 2019, “In–Situ Laser Excited Frequency Response of Additive Manufactured Parts,” Thirtieth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 12–14, accepted.
Johnson, K., Blough, J., Barnard, A., Hartwig, T, Brown, B., Soine, D., Cullom, T., Kinzel, E.C., Bristow, D.A., and Landers, R.G., 2019, “Dynamic Defect Detection in AM Parts Using FEA Simulation,” Thirtieth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 12–14, accepted.
Lough, C.S., Wang, X., Landers, R.G., Bristow, D.A., and Kinzel, E.C., 2019, “In–Situ Local Part Qualification of SLM 304L Stainless Steel through Voxel Based Processing of SWIR Imaging Data,” Thirtieth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 12–14, accepted.
Fischer, J., Woodside, M., Gonzalez, M., Lutes, N., Bristow, D.A., and Landers, R.G., “Iterative Learning Control of Single Point Incremental Sheet Forming Process using Digital Image Correlation,” SME North American Manufacturing Research Conference, Erie, Pennsylvania, June 10–14.
Gonzalez, M., Lutes, N., Fischer, J., Woodside, M., Bristow, D.A., and Landers, R.G., “Geometric Accuracy and Sheet Thickness Reduction in Multistage Incremental Sheet Forming,” SME North American Manufacturing Research Conference, Erie, Pennsylvania, June 10–14.
Capps, N., Kinzel, E.C., Landers, R.G., and Bristow, D., 2019, “Comparison of Volumetric to Surface Heating for Filament–Fed Laser Heated Additive Manufacturing of Glass,” Summer Heat Transfer Conference, Bellevue, Washington, July 15–18.
Li., H., Bristow, D.A., and Landers, R.G., 2019, “Robustness of A Plant-Inversion Based Switched Iterative Learning Control Scheme,” American Control Conference, Philadelphia, Pennsylvania, July 10–12.
Marma, K., Landers, R.G., and Park, J., 2019, “A Novel Cell Design of Alkaline–Based Zinc–Iodide Flow Battery for Enhancing Energy and Power,” 235th Electrochemical Society Meeting, May 26–31, Dallas, Texas, ECS Transactions, submitted.
Li, H., Bristow, D.A., and Landers, R.G., 2018, “A Plant–Inversion Based Switched Iterative Learning Control Scheme for a Special Class of Multivariable Systems,” ASME Dynamic Systems and Control Conference, Atlanta, Georgia, September 30 – October 3, paper 9069.
Yan, Lei, Wenyuan Cui, Joseph Newkirk, Frank Liou; Eric Thomas; Andrew Baker; James Castle, “Mechanical Properties Evaluation of Ti-6Al-4V Thin-wall Structure Produced by a Hybrid Manufacturing Process,” Proceedings of the 29th Solid Freeform Fabrication Symposium, Austin, Texas, August 13-15, 2018.
Zhang, Xinchang, Wenyuan Cui, Leon Hill, Wei Li, Frank Liou, “Development of Pre-machining Strategies for Laser-aided Metallic Component Remanufacturing,” Proceedings of the 29th Solid Freeform Fabrication Symposium, Austin, Texas, August 13-15, 2018.
Karnati, Sreekar, Atoosa Khiabani, Aaron Flood, Frank Liou, Joseph Newkirk, “Characterization of Impact Toughness of 304L Stainless Steel Fabricated through Laser Powder Bed Fusion Process,” Proceedings of the 29th Solid Freeform Fabrication Symposium, Austin, Texas, August 13-15, 2018.
Flood, Aaron, Frank Liou, “Effect of Environmental Variables on Ti-64 AM Simulation Results,” Proceedings of the 29th Solid Freeform Fabrication Symposium, Austin, Texas, August 13-15, 2018.
Zhang, Xinchang, Tan Pan, Wei Li, Frank Liou, “Experimental Characterization of Direct Metal Deposited Cobalt based Alloy on Tool Steel for Component Repair,” Proceedings of the 29th Solid Freeform Fabrication Symposium, Austin, Texas, August 13-15, 2018.
Karnati, Sreekar, Jack Hoerchler, Aaron Flood, Frank Liou, “Incorporation of Automated Ball Indentation Methodology for Studying Powder Bed Fabricated 304L Stainless Steel,” Proceedings of the 29th Solid Freeform Fabrication Symposium, Austin, Texas, August 13-15, 2018.
Chen, Yitao, Frank Liou, “Additive Manufacturing of Metal Functionally Graded Materials: A Review,” Proceedings of the 29th Solid Freeform Fabrication Symposium, Austin, Texas, August 13-15, 2018.
Yan, Lei, Tan Pan, Joseph Newkirk, Frank Liou, Eric Thomas, Andrew Baker, James Castle, “Fast Prediction of Thermal History in Large-scale Part Fabricated via a Laser Metal Deposition Process,” Proceedings of the 29th Solid Freeform Fabrication Symposium, Austin, Texas, August 13-15, 2018.
Pan, Tan, Sreekar Karnati, Frank Liou, “General Rules for the Powder Bed Build Setup - A Review,” Proceedings of the 29th Solid Freeform Fabrication Symposium, Austin, Texas, August 13-15, 2018.
Alyamani, Rakan1 and Long, Suzanna “Integrating Sustainable Project Typology and Isomorphic Influences: An Integrated Literature Review,” Proceedings of the 2018 ASEM IAC, Idaho, October 2018.
Hale, Jacob1 and Long, Suzanna “Systems Dynamics Approach to Renewable Energy System Selection,” Proceedings of the 2018 ASEM IAC, Idaho, October 2018.
Md. Azharul Islam and Sanjay Madria, A Permissioned Blockchain based Access Control System for IOT, to appear in proceedings of IEEE Blockchain 2019, USA. 5. Amartya Sen, Kenneth Fletcher and Sanjay Madria, A Secure User-Centric Framework for Dynamic Service Provisioning in IoT Environments, to appear in proceedings of 18th IEEE TrustCom, New Zealand, 2019.
San Yeung, H M Aziz and Sanjay Madria, Activity-based Shared Mobility Model for Smart Transportation, in IEEE proceedings of International Workshop on Mobility Data Analytics for Smart Cities, held with 20th IEEE International Conference on Mobile Data Management, Hong Kong, 2019.
Xiaofei Cao and Sanjay Madria, An Efficient Trajectory-based Routing using Virtual Coordinates for Low-Power WSNs with Mobile Sinks, in proceedings of IEEE International Conference on Distributed Computing in Sensor Systems (DCOSS 2019), Greece.
Prashant Modekurthy, Abusayeed Saifullah, Sanjay Madria, DistributedHART: A Distributed Real Time Scheduling System for WirelessHART Networks, in the proceedings of IEEE Real-Time and Embedded Technology and Applications Symposium (RTAS), 2019, Montreal, Canada.
Shudip Datta and Sanjay Madria, Efficient Photo Crowdsourcing in Delay-tolerant Networks with Evolving POIs, in 20th IEEE International Conference on Mobile Data Management, Hong Kong, June, 2019.
Shudip Datta, Sanjay Madria, Mark Linderman, and Jim Milligan, Secure Information Forwarding through Fragmentation in Delay-tolerant Networks, in the proceedings of 37th IEEE Symposium on Reliable Distributed Systems (SRDS 2018), Salvador, Brazil, 2018.
Himanshu Jethawa and Sanjay Madria, Reputation and Credit based Incentive Mechanism For Data-centric Message Delivery in DTNs, in the proceedings of 19th IEEE International Conference on Mobile Data Management, Aalborg, Denmark, June, 2018.
San Yeung, Katrina Ward, Sanjay Madria, Ridesharing-Inspired Trip Recommendations, in the proceedings of 19th IEEE International Conference on Mobile Data Management, Aalborg, June, 2018.
Dileep Mardham, Sanjay Madria, Mark Linderman and James Milligan, Opportunistic Distributed Caching for Mission-oriented Delay-tolerant Networks, in the IEEE proceedings of 14th Wireless On-demand Network systems and Services Conference, France.
Dileep Mardham, Sanjay Madria, Mark Linderman and James Milligan, Cloud Transactions Adhere to Strict Policy Consistency for Improved Performance, in proceedings of 33rd ACM Symposium on Applied Computing, Pau, France.
Amartya Sen, Sanjay Madria, Data Analysis of Cloud Security Alliance’s Security, Trust & Assurance Registry (Invited Paper), in the proceedings of ACM International Conference of Distributed Computing and Networking, Jan 4 - 7, 2018, Varanasi, India (ICDCN), 2018.
Abusayeed Saifullah, Prashant Modekurthy, Sanjay Madria, Distributed Graph Routing for WirelessHART Networks (Invited Paper), in the proceedings ACM International Conference of Distributed Computing and Networking. Jan 4 - 7, 2018, Varanasi, India (ICDCN), 2018.
S. S. Patlolla, B. McMillin, S. Adepu and A. Mathur, "An Approach for Formal Analysis of the Security of a Water Treatment Testbed," 2018 IEEE 23rd Pacific Rim International Symposium on Dependable Computing (PRDC), Taipei, Taiwan, 2018, pp. 115-124, doi: 10.1109/PRDC.2018.00022.
M. Wagner and B. McMillin, "Cyber-Physical Transactions: A Method for Securing VANETs with Blockchains," 2018 IEEE 23rd Pacific Rim International Symposium on Dependable Computing (PRDC), Taipei, Taiwan, 2018, pp. 64-73, 10.1109/PRDC.2018.00017.
P. Palaniswamy and B. McMillin, "Cyber-Physical Security of an Electric Microgrid," 2018 IEEE 23rd Pacific Rim International Symposium on Dependable Computing (PRDC), Taipei, Taiwan, 2018, pp. 74-83, 10.1109/PRDC.2018.00018.
Moniruzzaman Md, Yin Z, Qin R. Spatial attention mechanism for weakly supervised fire and traffic accident scene classification. In Proceedings of the 5th IEEE International Conference on Smart Computing (SMARTCOMP’19), Washington DC. June 12-14, 2019.
Wang+ Z., Qin* R, Yan J, Guo* C. Vision sensor based action recognition for improving efficiency and quality under the environment of industry 4.0. In Proceedings of the 26th CIRP Life Cycle Engineering Conference (CIRP-LCE’19), West Lafayette, IN. May 7-9, 2019.
Morgan+ JC, Qin R*. Modeling and understanding energy sharing communities: A system of systems approach. In Proceedings of the American Society for Engineering Management 2018 International Annual Conference (ASEM’18), Coeur d’Alene, Idaho. October 17-20, 2018.
Godse+ P, Xue+ J, Long SK, Qin R*. Data analysis for identifying high chance scenarios of hazardous material highway transportation incidents. In Proceedings of the American Society for Engineering Management 2018 International Annual Conference (ASEM’18), Coeur d’Alene, Idaho. October 17-20, 2018.
Li Y+, Sun Z, Qin R. Routing algorithm and cost analysis for using hydrogen fuel cell powered unmanned aerial vehicle in high voltage transmission line inspection. In Proceedings of the American Society for Engineering Management 2018 International Annual Conference (ASEM’18), Coeur d’Alene, Idaho. October 17-20, 2018.
Al-Amin+ Md, Tao W, Leu MC, Qin R*. Sensor data based models for workforce management in smart manufacturing. In Proceedings of the 2018 Industrial and Systems Engineering Research Conference (ISERC’18), Florida. May 19-22, 2018.
V. Narayanan and S. Jagannathan, “Optimality in event-triggered adaptive control of uncertain linear dynamical systems”, AIAA Science and Technology Forum and Exposition, San Diego, January 2019.
D. Tran, T. Yucelen, S. Jagannathan, “Dynamic information fusion with the integration of local observers, value of information, and active-passive consensus filters”, AIAA Science and Technology Forum and Exposition, San Diego, January 2019.
Krishnan Raghavan, S. Jagannathan, and V.A. Samaranayake, “A Minimax approach for classification with big-data,” Proc of the IEEE Conference on Big Data, pp. 1437-1444, December 2018.
Shweta Garg, Krishnan Raghavan, S. Jagannathan, and V.A. Samaranayake, “Distributed learning of deep sparse neural networks for high-dimensional classification”, Proc of the IEEE Conference on Bigdata, pp. 1587-1592, December 2018.
A.Sahoo, V. Narayanan and S. Jagannathan, “Event-triggered control of N-player nonlinear systems using nonzero-sum optimal sampling and regulation of uncertain interconnected linear continuous-time systems”, Proc. of the IEEE Symposium on Adaptive Dynamic Programming and Reinforcement Learning, pp. 1447-1452, November 2018.
V. Narayanan, A Sahoo, and S. Jagannathan, “Optimal adaptive distributed control of linear interconnected systems”, Proc. of the IEEE Symposium on Adaptive Dynamic Programming and Reinforcement Learning, pp. 1441-1446, November 2018.
Haifeng Niu, C. Bhowmick and S. Jagannathan, “A linear matrix inequality based attack detection approach for networked control systems”, Proc of the IEEE Conference on Decision and Control, pp. 5470-5475, December 2018.
A. Gaffoor, S. Balakrishnan, S. Jagannathan and T. Yucelen, “Event triggered neuro-adaptive controller (ETNAC) design for uncertain linear systems”, Proc of the IEEE Conference on Decision and Control, pp. 2217-2222, December 2018.
A. Gaffoor, S. Balakrishnan, S. Jagannathan and T. Yucelen, “Event triggered neuro-adaptive controller (ETNAC) design for uncertain affine nonlinear systems”, Proc of the ASME Dynamic Systems and Controls Conference, pp. V001T03A003-V001T03A003, September 30, 2018.
Vignesh Narayanan, A. Sahoo and S. Jagannathan, “Approximate optimal distributed control of nonlinear interconnected systems using nonzero-sum games”, Proc of the IEEE Conference on Decision and Control, pp. 2872-2877, December 2018.
*B. Ziegler, S. Sedigh Sarvestani, and A. R. Hurson. Facilitating failure analysis with software instrumentation. In Proceedings of the 19th IEEE International High Assurance Systems Engineering Symposium (HASE 2019), Hangzhou, China, Jan. 2019.
*N. Jarus, S. Sedigh Sarvestani, and A. R. Hurson. Formalizing cyber-physical system model transformation via abstract interpretation. In Proceedings of the 19th IEEE International High Assurance Systems Engineering Symposium (HASE 2019), Hangzhou, China, Jan. 2019
S. Yang, J. Bian, Z. Sun*, L. Wang, H. Zhu, H. Xiong, and Y. Li, 2018, Early detection of disease using electronic health records and fisher's Wishart discriminant analysis, Procedia Computer Science, 140, 393-402. Complex Adaptive Systems Conference, November 5-7, 2018, Chicago, IL, U.S.
Y. Li, Z. Sun*, and R. Qin, 2018, Routing algorithm and cost analysis for using hydrogen fuel cell powered unmanned aerial vehicle in high voltage transmission line inspection, in Proceedings of 2018 International Annual Conference of American Society for Engineering Management, October 17-20, 2018, Coeur d’Alene, ID, U.S.
J.C. Morgan, M.M. Calvin, Z. Sun, and R. Qin*, 2018, Energy sharing community as a decentralized complex adaptive system of systems, in Proceedings of 2018 Institute for Industrial and Systems Engineers Annual Conference, May 19-22, Orlando, FL, U.S.
S. J. Patel, S. L. Grant, M. Zawodniok, and J. Benesty, “On the Design of Optimal Linear Microphone Array Geometries,” in 2018 16th International Workshop on Acoustic Signal Enhancement (IWAENC), 2018, pp. 501–505.
M. Zawodniok, S. Patel, N. Iyyer, N.D. Phan, K. Goel, „RFID Solution for Tracking Components Life for Rotor Head Assembly” in proceedings of VFS Forum 75 conference, May 13-16, 2019.
S. Patel, M. Zawodniok, “Passive RFID tags for Metallic Environments Using Phased Array Reader Antennas” in IEEE I2MTC 2019 Proceedings, May 20-23, 2019
Non-Refereed Conference Papers
Dong, X., "Genome-based Multiscale Modeling of Crack Formation during Laser Directed Energy Deposition of Alumina Ceramics," 5th World Congress on Integrated Computational Materials Engineering (ICME 2019), Indianapolis, IN, USA, July 2019.
Dong, X., "Materials-genome-based Numerical Investigation of Microstructure Evolution and Cracking during Ceramic Additive Manufacturing," MS&T18, Columbus, Ohio, USA, October 2018.
Dong, X., "Laser Directed Energy Deposition of Alumina Ceramics and Sustainability", 16th Global Conference on Sustainable Manufacturing, Lexington, Kentucky, October 2018.
Dong, X., "Multi-Scale Modeling of Microstructure Evolution and Cracking during Direct Laser Deposition of Alumina Ceramics", 2018 Annual International Solid Freeform Fabrication Symposium, Austin, Texas, August 2018.
- R. Chowdhury and J. W. Kimball, "Voltage Sensorless Control of a Three-phase Grid Connected Inverter with LCL filter based on Passivity under Non-ideal Grid Voltage Conditions," in 2019 IEEE Power and Energy Conference at Illinois (PECI), 2019, pp. 1–8.
V. R. Chowdhury and J. W. Kimball, "Adaptive Feedback Linearization Based Control of a Three-Phase Grid Connected Inverter under Non-Ideal Grid Voltage Condition," in 2019 IEEE Power and Energy Conference at Illinois (PECI), 2019, pp. 1–5.
Hale, Jacob and Long, Suzanna, “A System Dynamics Approach to Transitioning a Residential Electricity Portfolio,” Proceedings of the IISE Annual Conference and Expo 2019, Orlando, FL, May 2019. Invited Session
Kanwar, B., Corns, S.M., Shoberg, T., and Long, S. “Flood Evacuation Planning and Routing using Deep Learning Neural Networks,” Proceedings of the Institute of Industrial and Systems Engineering Annual Conference. Orlando, FL, May 2019. Invited Session.
B. McMillin, "Software Engineering," in Computer, vol. 51, no. 2, pp. 10-12, February 2018. doi: 10.1109/MC.2018.1451647.
Wen HM, Hoffman AK, Duan JQ, “Microstructure evolution in irradiation-tolerant ultrafine grained steels”, presentation, 2019 TMS Annual Meeting, March 10–14, San Antonio, Texas.
Hoffman AK, Wen HM, “Effects of severe plastic deformation and irradiation on segregation and precipitation in ultrafine-grained steels studied using atom-probe tomography”, presentation, 2019 TMS Annual Meeting, March 10–14, San Antonio, Texas.
Arivu M, Hoffman AK, Duan JQ, Wen HM, “Thermal stability of ultrafine-grained FeCrAl alloy processed by equal-channel angular pressing or high-pressure torsion”, poster, 2019 TMS Annual Meeting, March 10–14, San Antonio, Texas.
Wen HM, Hoffman AK, Islamgaliev RK, “Development and evaluation of ultrafine-grained steels for nuclear applications”, poster, 2018 Nuclear Materials Conference, October 14–18, Seattle, Washington.
2018
Refereed Conference Papers
Ming Ni, Rui Bo, Jie Yan, "Design of A Game Theory Based Defense System for Power System Cyber Security", The 7th Annual IEEE Int. Conf. on CYBER Technology in Automation, Control, and Intelligent Systems (IEEE-CYBER 2017), Hawaii, USA, August 2017
Fengyu Wang, Yonghong Chen, Kory Hedman, Rui Bo and Tao Ding, "A Nodal Regulation Reserve Pricing Model for Deregulated Power Systems", Proceedings of 49th North American Power Symposium, Morgantown, WV, USA, Sept 2017.
Rui Bo, Zheng Zhou, Fengyu Wang and Syne Salem, "Non-Critical Transmission Constraints Identification and Removal for Long-Range Production Cost Simulation Performance Improvement", Proceedings of 2017 IEEE PES General Meeting, Chicago, July 2017
Taylor, G., Wang, X., Mason, L., Leu, M. C. and Chandrashekhara, K., "Optimization of Ultem 1010 Fused Deposition Modeling Specimens for Flexural Behavior," Paper No. TP17-0196, The Composites and Advanced Materials Expo Conference, Orlando, FL, December 12 - 14, 2017.
Gurjot, G. S., Anandan, G. S., Chandrashekhara, K. and Nam, P., "Development and Characterization of Polyurethane Foams with Substitution of Polyether Polyol with Soy-Based Polyol," Paper No. TP17-0203, The Composites and Advanced Materials Expo Conference, Orlando, FL, December 12 - 14, 2017.
Fal, M., Abutunis, A., Hussein, R., Dhaliwal, G. S. and Chandrashekhara, K., "Horizontal Axis Water Turbine Composite Blades: Damage Evaluation and Numerical Simulation," Paper No. TP17-0199, The Composites and Advanced Materials Expo Conference, Orlando, FL, December 12 - 14, 2017.
Hussein, R. M., Nicholas, J., Dhaliwal, G. S., Anandan, S. and Chandrashekhara, K., "Microstructure Image-Based Thermo-Mechanical Damage of Aged Bismaleimide Composites," Paper No. TP17-0201, The Composites and Advanced Materials Expo Conference, Orlando, FL, December 12 - 14, 2017.
Buchely, M. F., Van Aken, D. C., O’Malley, R. J., Lekakh, R. and Chandrashekhara, K., "Hot Rolling Effect Upon the High Temperature Johnson-Cook Strength and Failure Models for a 15V38 Grade Steel," Materials Science and Technology, Technical Meeting and Exhibition, pp. 1 - 9, Pittsburg, PA, October 8 - 12, 2017.
Spratt, M., Newkirk J. W and Chandrashekhara, K., "Aluminum Matrix Syntactic Foam Fabricated with Additive Manufacturing," 28th Annual International Solid Freeform Fabrication Symposium, Austin, TX, August 7 - 9, 2017.
Sampath, Vinayaka Nagendra Harikishan Gude Divya, and Corns, Steven M. “Evaluation of Support Vector Machine and Random Forest Classifiers in a Real-time Fetal Monitoring System Based on Cardiotocography Data”, Proceedings of the 2017 IEEE Conference on Computational Intelligence in Bioinformatics and Computational Biology, Manchester, UK, August, 2017.
R. P. Barnwal, N. Ghosh, S. K. Ghosh, and S. K. Das, “PS-Sim: A Framework for Scalable Simulation of Participatory Sensing Data,” 4th IEEE International Conference on Smart Computing, Sicily, Italy, pp. 195-202, June 2018.
F. Righetti, C. Vallati, G. Anastasi, and S. K. Das, “Analysis and Improvement of On-the-Fly Bandwidth Reservation Algorithm for 6TiSCH,” 19th IEEE International Symposium on a World of Wireless, Mobile and Multimedia Networks (WoWMoM), Chania, Greece, June 2018.
A. Pratap, R. Misra, and S. K. Das, “Resource Allocation to Maximize Fairness and Minimize Interference for Maximum Spectrum Reuse in 5G Cellular Networks,” 19th IEEE Int’l Symposium on a World of Wireless, Mobile and Multimedia Networks (WoWMoM), Chania, Greece, June 2018.
S. Bhattacharjee, A. Thakur, and S. K. Das, “Towards Fast and Semi-supervised Identification of Smart Meters Launching Data Falsification Attacks,” 13th ACM Asia Conference on Computer and Communications Security (ASIACCS), Incheon, S. Korea, pp. 173-185, June 2018.
D. Wu, J. Li, S. K. Das, J. Wu, Y. Ji and Z. Li, “Novel Distributed Denial-of-Service Attacks Detection for Software Defined Networking Environments,” IEEE International Conference on Communications (ICC), SAC Symposium Cloud Communications and Networking Track, May 2018.
Y. Ren, J. Li, Y. Ji, S. K. Das, and Z. Li, “A Novel User Revocation Scheme for Key Policy Attribute Based Encryption in Cloud Environments,” IEEE International Conference on Communications (ICC), Green Communications Systems and Networks Symposium, Kansas City, May 2018.
F. B. Sorbelli, C. M. Pinotti, S. Silvestri, and S. K. Das, “On the Accuracy of Localizing Terrestrial Objects Using Drones," IEEE International Conference on Communications (ICC), Wireless Networking Symposium, May 2018.
K. Liu, P. Wang, J. Zhang, G. Liu, Y. Fu, and S. K. Das, “Incorporating Interaction Coupling among Multi-View Spatiotemporal Contexts for Mobike Destination Prediction,” SIAM International Conference on Data Mining (SDM), San Diego, pp. 171-179, May 2018.
J. Bian, H. Xiong, Y. Fu, and S. K. Das, “CSWA: Aggregation-Free Spatial-Temporal Community Sensing,” 32nd Second AAAI Conference on Artificial Intelligence, New Orleans, Feb. 2018.
F. B. Sorbelli, S. K. Das, C. M. Pinotti, and S. Silvestri, “Precise Localization in Sparse Sensor Networks using a Drone with Directional Antennas,” 19th ACM International Conference on Distributed Computing and Networking (ICDCN), Jan 2018.
S. Kumar and S. K. Das, “ZU-Mean: Fingerprinting based Device Localization Methods for IoT in the Presence of Additive and Multiplicative Noise,” 7th Int’l Workshop on Computing and Networking for IoT and Beyond, Jan 2018.
S. Roy, A. Tamimi, A. Hahn, M. Xue, S. K. Das, H. Van Dongen, A. Vosughi, and S. Warnick, “A Modeling Framework for Assessing Cyber Disruptions and Attacks to the National Airspace System,” AIAA Modeling and Simulation Technologies Conference, Kissimmee, FL, Jan 2018.
V. K. Shah, S. Bhattacharjee, S. Silvestri, and S. K. Das, “Designing Sustainable Smart Connected Communities using Dynamic Spectrum Access via Band Selection,” 4th ACM International Conf. on Systems for Energy-Efficient Built Environments (BuildSys), The Netherlands, Nov 2017.
S. Bhattacharjee, N. Ghosh, V. K. Shah, and S. K. Das, “QnQ: A Reputation Model to Secure Mobile Crowdsourcing Applications from Incentive Losses,” IEEE Conference on Communications and Network Security (CNS), Oct 2017.
S. Vaidhun, S. Arefin, Z. Guo, H. Xiong, and S. K. Das, “Response Time in Mixed-Critical Pervasive Systems,” 14th IEEE Int’l Conference on Ubiquitous Intelligence and Computing (UIC), Aug. 2017.
S. K. Das and H. Yamana, “Securing Big Data and IoT Networks in Smart Cyber-Physical Environments,” ACM Int’l Conf. on Smart Digital Environments (ICSDE), pp. 189-194, July 2017.
*Wei, X., Du, X., “Uncertainty Analysis for Time- And Space-Dependent Responses with Random Variables,” Proceedings of the ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC2018, August 26-29, 2018, Quebec City, Quebec, Canada.
*Hu, Z., Du, X., “A Partial Safety Factor Method for System Reliability Prediction with Outsourced Components,” Proceedings of the ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC2018, August 26-29, 2018, Quebec City, Quebec, Canada.
Kim, Y., and D. Enke, “Instance Selection Using Genetic Algorithms for an Intelligent Ensemble Trading System,” Procedia Computer Science, Vol. 114 (2017): 465-472.
Mehdiyev, N., D. Enke, P. Fettke, and P. Loos, “Time Series Classification Using Deep Learning for Process Planning: A Case from the Process Industry,” Procedia Computer Science, Vol. 114 (2017): 242-249.
B. Baddipadiga, S. Strathman, M. Ferdowsi, and J. Kimball, “A high-voltage-gain dc-dc converter for powering a multi-mode monopropellant-electrospray propulsion system in satellites,” in Proc. IEEE 33rd Applied Power Electronics Conference and Exposition (APEC), San Antonio, TX, Mar. 2018, pp. 1561-1565.
A. Alzahrani, P. Shamsi, M. Ferdowsi, and C. Dagli, “Chaotic behavior of DC-DC converters,” in Proc. IEEE 6th International Conference on Renewable Energy Research and Applications (ICRERA), San Diego, CA, Nov. 2017, pp. 1013-1018.
A. Alzahrani, P. Shamsi, M. Ferdowsi, and C. Dagli, “Modeling and simulation of a microgrid using feedforward neural networks,” in Proc. IEEE 6th International Conference on Renewable Energy Research and Applications (ICRERA), San Diego, CA, Nov. 2017, pp. 1001-1006.
A. Alzahrani, P. Shamsi, and M. Ferdowsi, “Single and interleaved split-pi DC-DC converter,” in Proc. IEEE 6th International Conference on Renewable Energy Research and Applications (ICRERA), San Diego, CA, Nov. 2017, pp. 995-1000.
A. Alzahrani, P. Shamsi, M. Ferdowsi, and C. Dagli, “Solar irradiance forecasting using deep recurrent neural networks,” in Proc. IEEE 6th International Conference on Renewable Energy Research and Applications (ICRERA), San Diego, CA, Nov. 2017, pp. 988-994.
A. Alzahrani, P. Shamsi, and M. Ferdowsi, “Boost converter with bipolar Dickson voltage multiplier cells,” in Proc. IEEE 6th International Conference on Renewable Energy Research and Applications (ICRERA), San Diego, CA, Nov. 2017, pp. 228-233.
A. Alzahrani, P. Shamsi, and M. Ferdowsi, “A novel interleaved non-isolated high-gain DC-DC boost converter with Greinacher voltage multiplier cells,” in Proc. IEEE 6th International Conference on Renewable Energy Research and Applications (ICRERA), San Diego, CA, Nov. 2017, pp. 222-227.
A. Alzahrani, P. Shamsi, and M. Ferdowsi, “An interleaved non-isolated DC-DC boost converter with diode-capacitor cells,” in Proc. IEEE 6th International Conference on Renewable Energy Research and Applications (ICRERA), San Diego, CA, Nov. 2017, pp. 216-221. (Best Poster Award)
S. Mukherjee, V. Roy Chowdhury, P. Shamsi, and M. Ferdowsi, “A voltage sensorless phase locked loop structure for single phase grid connected converter system,” in Proc. IEEE Energy Conversion Congress and Exposition (ECCE), Cincinnati, OH, Oct. 2017, pp. 5720-5725.
S. Mukherjee, V. Roy Chowdhury, P. Shamsi, and M. Ferdowsi, “Filter capacitor current estimation and grid current control in LCL based grid connected inverter,” in Proc. IEEE Energy Conversion Congress and Exposition (ECCE), Cincinnati, OH, Oct. 2017, pp. 3885-3889.
V. Roy Chowdhury, S. Mukherjee, P. Shamsi, and M. Ferdowsi, “Control of a three-phase inverter under unbalanced grid conditions,” in Proc. IEEE Energy Conversion Congress and Exposition (ECCE), Cincinnati, OH, Oct. 2017, pp. 2909-2913.
A. Alzahrani, P. Shamsi, and M. Ferdowsi, “A novel non-isolated high-gain dc-dc boost converter,” in Proc. IEEE 49th North American Power Symposium (NAPS), Morgantown, VW, Sept. 2017, pp. 1-6.
J. Huang, “Compact and robust optical Fabry-Perot interferometers for structural health monitoring”, Paper No.10654-16 SPIE Defense + Commercial Sensing Apr. 2018
L. Chi, M. Huang, A. Pfaff, R. Gerald II, J. Huang, and K. Woelk, “NMR hardware and pulse sequences with CapPack™ devices” 59th Experimental Nuclear Magnetic Resonance Conference April 29 - May 4, 2018 Orlando, FL
M. Huang, S. Chen, R. Gerald II, J. Huang, and K. Woelk, “NMR Studies of Loaded Microspheres” 59th Experimental Nuclear Magnetic Resonance Conference April 29 - May 4, 2018 Orlando, FL
R. Gerald II, J. Huang, K. Woelk, M. Huang, L. Chi, W. Stoecker, and S. Cartwright, “Acupuncture-MRI Cancer Probe” 59th Experimental Nuclear Magnetic Resonance Conference April 29 - May 4, 2018 Orlando, FL
S. Jothibasu* and J. Huang, “Spatially continuous strain monitoring of carbon fiber composites using embedded distributed fiber optic sensors” Paper No. 10598-17 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
Y. Zhuang* and J. Huang, “A pendulum based optical fiber inclinometer with nanoradian resolution” Paper No.10598-86 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
C. Zhu* and J. Huang, “A three-dimensional sliding and debonding sensor based on triaxial optical fiber Fabry-Perot interferometers Paper No. 10598-122 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
C. Zhu* and J. Huang, “An optical fiber extrinsic Fabry-Perot interferometer based displacement sensor with centimeter measurement range” Paper No.10598-131 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
C. Zhu* and J. Huang, “Wide-range displacement sensor based on a hollow coaxial cable Fabry-Perot resonator” Paper No.10598-136 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
C. Zhu* and J. Huang, “Buckled beam based optical interferometric pressure sensor with low temperature cross-sensitivity” Paper No.10598-137 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
Y. Zhuang* and J. Huang, “Frequency domain fiber loop ring-down system for liquid refractive index sensing” Paper No. 10598-144 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
Y. Zhuang* and J. Huang, “A high resolution extrinsic Fabry-Perot interferometer-based two-dimensional optical fiber inclinometer” Paper No.10598-145 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
Y. Zhuang* and J. Huang, “A novel high temperature sensor based on a hollow coaxial cable Fabry-Perot resonator” Paper No. 10598-146 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
Y. Du* and J. Huang, “A mechanical designed EFPI using buckling beam mechanism for strain sensing Paper No. 10598-147 SPIE Smart Structures + Nondestructive Evaluation Mar. 2018
W. St. Pierre and J. W. Kimball, “Minimum Dwell Times for the Stability of Switched Systems with Multiple Stable Operating Points,” in Proceedings of the American Control Conference, 2018, pp. 3798–3903.
B. P. Baddipadiga, S. Strathman, M. Ferdowsi, and J. W. Kimball, "A high-voltage-gain DC-DC converter for powering a multi-mode monopropellant-electrospray propulsion system in satellites," in Proc. IEEE Applied Power Electronics Conf., 2018, pp. 1561–1565.
P. Jain, J. A. Mueller, R. Landers, J. Park, and J. W. Kimball, “Battery Optimization in Microgrids using Markov Decision Process Integrated with Load and Solar forecasting,” in Proc. IEEE Intl. Symp. Power Electronics for Distributed Generation Systems, Charlotte, NC, 2018, pp. 1–6.
G. Mpembele and J. W. Kimball, “A Matrix Representation of a Markov Jump Linear System Applied to a Standalone Microgrid,” in Proc. IEEE Intl. Symp. Power Electronics for Distributed Generation, Charlotte, NC, 2018, pp. 1–8.
Bristow, D.A., and Kinzel, E.C., 2018, “Dynamic Defect Detection in AM Parts,” Twenty Ninth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 13–15.
Cullom, T., Landers, R.G., Bristow, D.A., Kinzel, E.C., Johnson, K., Blough, J., Barnard, A., Hartwig, T., and Brown, B., 2018, “Effects of Identical Parts on a Common Build Plate on the Modal Analysis of SLM Created Metal,” Twenty Ninth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 13–15.
Dvorak, M., Gegel, M., Bristow, D.A., and Landers, R.G., 2018, “5–Axis Path Planning for Direct Metal Deposition using Deformed Centerline Transformation,” Twenty Ninth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 13–15.
Hostetler, J., Goldstein, J., Brow, R., Bristow, D., Landers, R.G., and Kinzel, E., 2018, “Fiber–Fed Printing of Free–Form Free–Standing Glass Structures,” Twenty Ninth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 13–15.
Lough, C., Landers, R.G., Bristow, D.A., and Kinzel, E.C., 2018, “In–Situ Optical Emission Spectroscopy during SLM of 304L Stainless Steel,” Twenty Ninth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 13–15.
Lough, C., Wang, X., Landers, R.G., Bristow, D.A., and Kinzel, E.C., 2018, “Use of SWIR Imaging to Monitor Layer–to–Layer Part Quality during SLM of 304L Stainless Steel,” Twenty Ninth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 13–15.
Wang, X., Bristow, D.A., Kinzel, E.C., and Landers, R.G., 2018, “Effects of Thermal Camera Spatial and Temporal Resolution on Feature Extraction in Selective Laser Melting,” Twenty Ninth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 13–15.
Ma, L., Bristow, D.A., and Landers, R.G., 2018, “Modeling and Compensation of Industrial Robot Kinematic Errors using a SmartTRACK Sensor,” International Symposium on Flexible Automation, Kanazawa, Japan, July 15–19.
Li, S., Wang, J., An, B., Tang, A., and Landers, R.G., 2018, “Wire Saw Force Modeling and Control using Wire Saw Velocity,” International Symposium on Flexible Automation, Kanazawa, Japan, July 15–19.
Jain, P., Mueller, J. Park, J., Landers, R.G., and Kimball, J., 2018, “Battery Optimization in Microgrids using Markov Decision Process Integrated with Load and Solar Forecasting,” 9th International Symposium on Power Electronics for Distributed Generation, Charlotte, North Carolina, June 25–28.
Ma, L., Bristow, D.A., and Landers, R.G., 2018, “Characterization of Kinematic Error Model Consistency for Five–Axis Machine Tools,” ASME Manufacturing Science and Engineering Conference, College Station, Texas, June 18–22.
Curtis, B., Peters, D., Hostetler, J., Landers, R.G., Bristow, D.A., and Kinzel, E.C., 2018, “Printing Free–Form Free–Standing Glass Structures,” ASME Manufacturing Science and Engineering Conference, College Station, Texas, June 18–22.
Li., H., Bristow, D.A., and Landers, R.G., 2018, “A Switched Iterative Learning Control Scheme for Two–Input Two–Output Systems,” American Control Conference, Milwaukee, Wisconsin, June 27–29.
Gegel, M., Bristow, D.A., and Landers, R.G., 2018, “A Quadratic–Optimal Repetitive Process Controller for Laser Metal Deposition,” American Control Conference, Milwaukee, Wisconsin, June 27–29.
West, B.M., Capps, N., Urban, J., Hartwig, T., Brown, B., Bristow, D.A., Landers, R.G., and Kinzel, E.C., 2018, “Extraction of Coupling Stiffness of Specimens Printed with Selective Laser Melting using Modal Analysis,” IMAC XXVI, Orlando, Florida, February 12–15.
Hostetler, J., Peters, D., Goldstein, J., Bristow, D., Landers, R.G., and Kinzel, E.C., 2018, “Laser Heated, Fiber Fed Additive Manufacturing of Transparent Soda–Lime Glass,” SPIE Photonics West, San Francisco, California, January 27 – February 1.
Hostetler, J., Goldstein, J., Landers, R.G., Bristow, D.A., and Kinzel, E.C., 2017, “Fiber–Fed Laser–Melting Process for Printing Transparent Glass,” Twenty Eighth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 7–9, pp. 1594–1601.
Li, L., Lough, C., Replogle, A., Bristow, D.A., Landers, R.G., and Kinzel, E.C., 2017, “Thermal Modeling of 304L Stainless Steel Selective Laser Melting,” Twenty Eighth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 7–9, pp. 1068–1081.
Urban, J., Capps, N., West, B., Hartwig, T., Lund, T., Brown, B., Landers, R.G., Bristow, D.A., and Kinzel, E.C., 2017, “Towards Defect Detection in Metal SLM Parts using Modal Analysis ‘Fingerprinting’,” Twenty Eighth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 7–9, pp. 2503–2515.
Capps, N.E., Urban, J.S., West, B.M., Lough, C., Replogle, A., Hartwig, T., Brown, B., Bristow, D.A., Landers, R.G., and Kinzel, E.C., 2017, “Relating Processing of Selective Laser Melted Structures to their Material and Modal Properties,” Solid Freeform Fabrication Symposium, Austin, Texas, August 7–9, pp. 17–28.
“Solvent Based 3D Printing of Biopolymer/Bioactive Glass Composite and Hydrogel for Tissue Engineering Applications,” K. Kolan, Y. Liu, J. Balkdridge, C. Murphy, J. Semon, D. Day, and M.C. Leu, Proceedings of the 3rd CIRP Conference on BioManufacturing, Chicago, IL. July 11-14, 2017.
“Fabricating Zirconia Components with Organic Support Material by the Ceramic On-Demand Extrusion Process,” W. Li, A. Ghazanfari, D. McMillen, M. C. Leu, and G. E. Hilmas, Proceedings of Solid Freeform Fabrication Symposium, Austin, TX, August 7-9, 2017.
“Bonding of 304L Stainless Steel to Cast Iron by Selective Laser Melting,” B. Thomas, A. Sutton, M. C. Leu, and N. Doiphode,” Proceedings of Solid Freeform Fabrication Symposium, Austin, TX, August 7-9, 2017.
“Characterization of Heat-Affected Powder Generated during Selective Laser Melting of 304L Stainless Steel Powder,” A. Sutton, C. Kriewall, M. C. Leu, and J. Newkirk N., Proceedings of Solid Freeform Fabrication Symposium, Austin, TX, August 7-9, 2017.
“Effects of Area Fraction and Part Spacing on Degradation of 304L Stainless Steel Powder in Selective Laser Melting,” C. Kriewall, A. Sutton, S. Karnati, M. C. Leu, and J. Newkirk N., Proceedings of Solid Freeform Fabrication Symposium, Austin, TX, August 7-9, 2017.
“Building Zr-based Metallic Glass Part on Ti Alloy by Laser-Foil-Printing Additive Manufacturing,” Y. Li, Y. Shen, M. C. Leu, and H. L. Tsai, Proceedings of Solid Freeform Fabrication Symposium, Austin, TX, August 7-9, 2017.
“Mechanical Properties of 304L Parts Made by Laser-Foil-Printing Technology,” C. H. Hung, Y. Shen, M. C. Leu, and H. L. Tsai, Proceedings of Solid Freeform Fabrication Symposium, Austin, TX, August 7-9, 2017.
“Investigation of Ultem 1010 FDM Sparse-Build Parts Using Design of Experiments and Numerical Simulation,” G. Taylor, X. Wang, L. Mason, M. C. Leu, K. Chandrashekhara, M. Matlack, J. Castle, and T. Schniepp, Proceedings of Composites and Advanced Materials Expo (CAMX 2017), Orlando, FL, September 11-14, 2017.
“Real-time Communication for Manufacturing Cyber-Physical Systems,” N-T. Nguyen, M. C. Leu, and X. F. Liu, Proceedings of the 16th IEEE International Symposium on Network Computing and Applications (NCA 2017), Cambridge, MA, Oct. 30 – Nov. 1, 2017.
“Solvent and Melt Based Extrusion 3D Printing of Polycaprolactone Bioactive Glass Composite for Tissue Engineering,” K. C. R. Kolan, W. Li, R. Althage, J. A. Semon, D. E. Day, and M. C. Leu, Proceedings Of The 3rd International Conference On Progress In Additive Manufacturing (Pro-Am 2018), May 14-17, 2018, Singapore.
“American Sign Language Alphabet Recognition Using Leap Motion Controller,” W. Tao, Z. Lai, M. C. Leu and Z. Yin, Proceedings of the 2018 Institute of Industrial and Systems Engineers Annual Conference (IISE 2018), May 19-22, 2018, Orlando, FL.
“Sensor Data Based Models for Workforce Management in Smart Manufacturing,” M. Al-Amin, R. Qin, W. Tao, and M. C. Leu, Proceedings of the 2018 Institute of Industrial and Systems Engineers Annual Conference (IISE 2018), May 19-22, 2018, Orlando, FL.
“Engine Sound Simulation and Generation in Driving Simulator,” S. Wu, W. Tao, M. C. Leu, and S. Long, Proceedings of the 2018 Institute of Industrial and Systems Engineers Annual Conference (IISE 2018), May 19-22, 2018, Orlando, FL.
“Modeling of Cloud-Based Digital Twins for Smart Manufacturing with MTConnect,” L. Hu, N. Nguyen, W. Tao, M. C. Leu, X. F. Liu, M. R. Shahriar and S. M. N. A. Sunny, Proceedings of the 46th SME North American Manufacturing Research Conference, (NAMRC 46), June 18-22, 2018, College Station, TX.
“Worker Activity Recognition in Smart Manufacturing Using IMU and sEMG Signals with Convolutional Neural Networks,” W. Tao, Z. Lai, M. C. Leu and Z. Yin, Proceedings of the 46th SME North American Manufacturing Research Conference, (NAMRC 46), June 18-22, 2018, College Station, TX.
“MTComm based Virtualization and Integration of Physical Machine Operations with Digital-Twins in Cyber-Physical Manufacturing Cloud,” M. R. Shahriar, S. M. N. A. Sunny, X. F. Liu, M. C. Leu, L. Hu, and N. T. Nguyen, Proceedings of the 5th IEEE International Conference on Cyber Security and Cloud Computing (IEEE CSCloud 2018), June 22-24, 2018, Shanghai, CHINA.
Flood, Aaron, and Frank Liou, ” Review of AM simulation validation techniques,” Proceedings of the 28th Solid Freeform Fabrication Symposium, Austin, Texas, August 6-9, 2017.
Karnati, Sreekar, Jack Hoerchler, Frank Liou, and Joseph Newkirk, “Impact of specimen dimensions on miniature tensile characterization of powder bed fabricated 304L stainless steel,” Proceedings of the 28th Solid Freeform Fabrication Symposium, Austin, Texas, August 6-9, 2017.
Hill, Leon, Todd Sparks, Frank Liou, “Development of A Hybrid Manufacturing Process for Precision Metal Parts,” Proceedings of the 28th Solid Freeform Fabrication Symposium, Austin, Texas, August 6-9, 2017.
Zhang, Jingwei, Wei Li, Frank Liou, Joseph Newkirk, “A two-dimensional simulation of grain structure growth within substrate and fusion zone during direct metal deposition,” Proceedings of the 28th Solid Freeform Fabrication Symposium, Austin, Texas, August 6-9, 2017.
Li, Wei, Jingwei Zhang, Xinchang Zhang, Sreekar Karnati, Frank Liou, “Effect of Optimizing Particle Size in Laser Metal Deposition with Blown Pre-mixed Powders,” Proceedings of the 28th Solid Freeform Fabrication Symposium, Austin, Texas, August 6-9, 2017.
Gaja, Haythem, Frank Liou, “Defects Detection of Laser Metal Deposition Using Acoustic Emission Sensor,” Proceedings of the 28th Solid Freeform Fabrication Symposium, Austin, Texas, August 6-9, 2017.
Yan, Lei, Leon Hill, Joseph Newkirk, Frank Liou, “Investigation of Build Strategies for A Hybrid Manufacturing Process Progress on Ti-6Al-4V,” Proceedings of the 28th Solid Freeform Fabrication Symposium, Austin, Texas, August 6-9, 2017.
Cui, Wenyuan, Xinchang Zhang, Frank Liou, “Additive Manufacturing of High Entropy Alloys – A Review,” Proceedings of the 28th Solid Freeform Fabrication Symposium, Austin, Texas, August 6-9, 2017.
Zhang, Xinchang, Wenyuan Cui, Wei Li, Frank Liou, “Metallic components repair strategies using the hybrid manufacturing process,” Proceedings of the 28th Solid Freeform Fabrication Symposium, Austin, Texas, August 6-9, 2017.
Cheng, Y; F. Liou; C. Cheng; and S. Shen, “A Framework for Process Inspection of Metal Additive Manufacturing,” 2018 IEEE International Conference on Applied System Innovation, Chiba, Tokyo, Japan, April 13-17, 2018.
Hale, Jacob1, Godse, Pranav1, and Long, Suzanna “Shifting the Energy Market: A Case for Microgrids,” Proceedings of the 2018 IISE Annual Conference, K. Barker, D. Berry, C. Rainwater, eds., Orlando, FL, May 2018.
Moradpour, Samareh1, Smith, Brian, Long, Suzanna, and Robin, Paul1 “Multinomial Logistic Regression Analysis for Work Zone Safety,” Proceedings of the 2018 IISE Annual Conference, K. Barker, D. Berry, C. Rainwater, eds., Orlando, FL, May 2018. Abstract only
Ojha, Akhilesh1, Long, Suzanna, Shoberg, Tom, and Corns, Steven M. “A Mathematical Programming Approach to Minimizing Post-Disaster Transportation Indirect Costs,” Proceedings of the 2018 IISE Annual Conference, K. Barker, D. Berry, C. Rainwater, eds., Orlando, FL, May 2018. Abstract only
Wu, Shuang1, Tao, Wenjin1, Leu, Ming C., and Long, Suzanna “Engine Sound Simulation and Generation in Driving Simulator,” Proceedings of the 2018 IISE Annual Conference, K. Barker, D. Berry, C. Rainwater, eds., Orlando, FL, May 2018.
Godse, Pranav1, Al-Amin, MD1, Qin, Ruwen, and Long, Suzanna “An Analysis of Human Involved Incident Data for Enhancing the Safety of Hazardous Material Transportation,” Proceedings of the 2018 IISE Annual Conference, K. Barker, D. Berry, C. Rainwater, eds., Orlando, FL, May 2018. Abstract only
Perez-Lespier, Lizzette, Long, Suzanna, and Shoberg, Tom “Post-Disaster Diagnostics of Sustainable, Resilient Decision-Making for Maritime Transportation Systems,” Proceedings of the 2018 IISE Annual Conference, K. Barker, D. Berry, C. Rainwater, eds., Orlando, FL, May 2018. Abstract only
Ojha, Akhilesh1, Long, Suzanna, Shoberg, Tom, and Corns, Steven M. “Improving the Efficiency of Vital Supply Distribution after an Extreme Event,” Proceedings of the AAG, New Orleans, LA, April 2018. Abstract Only
Kanwar, Bhanu1, Corns, Steven M., Long, Suzanna, and Shoberg, Tom “Mapping Influential Nodes for Transportation Network Post-Disaster Restoration Planning Using Real-World Data,” Proceedings of the AAG, New Orleans, LA, April 2018. Abstract Only
Ziemer, Norbert, Long, Suzanna, Grayburn, Scott, Holbrook, Gabriel, and Tatara, Robert “Algal Biomass for Water Clean-Up – A Slightly Different Twist on Algae,” Proceedings of the American Society for Engineering Management 2017 International Annual Conference E-H. Ng, B. Nepal, and E. Schott eds., Huntsville, AL, October 2017.
Moradpour, Samareh1 and Long, Suzanna2 “K-Mean Clustering in Transportation: A Work Zone Simulator Case Study,” Proceedings of the American Society for Engineering Management 2017 International Annual Conference E-H. Ng, B. Nepal, and E. Schott eds., Huntsville, AL, October 2017.
Perez-Lespier, Lizzette1, Long, Suzanna2, and Shoberg, Tom “Prioritizing Key Environmental Impacts Indicators from Maritime Transportation Systems: A Monte Carlo Simulation Approach,” Proceedings of the American Society for Engineering Management 2017 International Annual Conference E-H. Ng, B. Nepal, and E. Schott eds., Huntsville, AL, October 2017. Abstract only.
Moradpour, Samareh1 and Long, Suzanna2 “Data Mining Applications in Transportation,” Proceedings of the American Society for Engineering Management 2017 International Annual Conference E-H. Ng, B. Nepal, and E. Schott eds., Huntsville, AL, October 2017. Abstract only.
Ojha, Akhilesh1, Long, Suzanna2, Shoberg, Tom, and Corns, Steven “A System Dynamics Approach for Estimating Post-disaster Transportation Network Failure Costs,” Proceedings of the American Society for Engineering Management 2017 International Annual Conference, Proceedings of the American Society for Engineering Management 2017 International Annual Conference E-H. Ng, B. Nepal, and E. Schott eds., Huntsville, AL, October 2017. Abstract only.
Himanshu Jethawa and Sanjay Madria, Reputation and Credit based Incentive Mechanism For Data-centric Message Delivery in DTNs, in the proceedings of 19th IEEE International Conference on Mobile Data Management, Aalborg, Denmark, June, 2018.
San Yeung, Katrina Ward, Sanjay Madria, Ridesharing-Inspired Trip Recommendations, in the proceedings of 19th IEEE International Conference on Mobile Data Management, Aalborg, June, 2018.
Dileep Mardham, Sanjay Madria, Mark Linderman and James Milligan, Opportunistic Distributed Caching for Mission-oriented Delay-tolerant Networks, in the IEEE proceedings of 14th Wireless On-demand Network systems and Services Conference, France.
Dileep Mardham, Sanjay Madria, Mark Linderman and James Milligan, Cloud Transactions Adhere to Strict Policy Consistency for Improved Performance, in proceedings of 33rd ACM Symposium on Applied Computing, Pau, France.
Amartya Sen, Sanjay Madria, Data Analysis of Cloud Security Alliance’s Security, Trust & Assurance Registry (Invited Paper), in the proceedings of ACM International Conference of Distributed Computing and Networking Jan 4 - 7, 2018, Varanasi, India (ICDCN), 2018.
Abusayeed Saifullah, Prashant Modekurthy, Sanjay Madria, Distributed Graph Routing for WirelessHART Networks (Invited Paper), in the proceedings ACM International Conference of Distributed Computing and Networking. Jan 4 - 7, 2018, Varanasi, India (ICDCN), 2018.
Masahiro Yokoyama, Takahiro Hara, and Sanjay Madria, Efficient Diversified Set Monitoring for Mobile Sensor Stream Environments, in the proceedings of IEEE Big Data 2017, USA.
Xiaofei Cao, Sanjay Madria and Takahiro Hara, Efficient Z-order Encoding Based Multi-model Data Compression in WSNs, in the proceedings of 37th IEEE International Conference in Distributed Computing (ICDCS 2017), Atlanta, USA.
Katrina Ward, Dan Lin and Sanjay Madria, MELT: Mapreduce-based Efficient Large-scale Trajectory Anonymization, in the proceedings of 29th ACM International Conference on Scientific and Statistical Database Management (SSDBM, 2017), USA.
Dali Ismail, Abu Saifullah, Md. Mahbubur, Sanjay Madria, RnR: Reverse & Replace Decoding for Collision Recovery in Wireless Sensor Networks, in the proceedings of IEEE International Conference on Sensing, Communication and Networking (SECON, 2017), USA.
Himanshu Jethawa and Sanjay Madria, Incentive Mechanism for Data-Centric Message Delivery in Delay Tolerant Networks, in the proceedings of 37th IEEE International Conference on Distributed Computing Systems (ICDCS 2017), Demo Paper, Atlanta, USA.
Xiafei Cao, Sanjay Madria, and Takahiro Hara, A WSN Testbed for Z-order Encoding Based Multi-modal Data Compression”, in the proceedings of IEEE International Conference on Sensing, Communication and Networking (SECON), 2017, San Diego, USA.
Joseph Hargrave , San Yeung, and Sanjay Madria, Integration of Dynamic Road Condition Updates for Real-Time Ridesharing Systems, Fourth National Workshop for REU Research in Networking and Systems held with 14th International Conference on Mobile Ad-hoc and Sensor Systems (IEEE MASS 2017), Orlando, FL.
Amartya Sen and Sanjay Madria, Internet of Things: Current Trends and Emerging Prospects. In the proceedings of International Symposium on Sensor Networks, Systems and Security (ISSNSS) 2017, Springer.
Love, F. and McMillin, B., “Breaking Implicit Trust in Point-of-Care Medical Technology: A Cyber-Physical Attestation Approach,” 4th IEEE International Workshop on Medical Computing (MediComp 2017) in the Computer Software and Applications Conference 2017, 10.1109/COMPSAC.2017.74.
J. Li, X. Liang, Rahul Panat, and J. Park, “Microstructure-Controlled 3D Electrodes for Lithium-Ion Batteries”, ECS Transactions, 85 (13) 369-378 (2018)
Prateek Jain, Jacob Mueller, Jonghyun Park, Robert Landers, and Jonathan Kimball, Battery Optimization in Microgrids using Markov Decision Process Integrated with Load and Solar Forecasting, IEEE 9th International Symposium on Power Electronics for Distributed Generation, 2018, 25th - 28th June
Yu, X., Chen, I., Sarkar, S., Park, J., Pan, H., “Direct Aerosol Printing of Lithium-ion Batteries”, IMAPS 50th International Symposium on Microelectronics, Oct 2017.
Susmita Sarkar and Jonghyun Park, “A Comprehensive Understanding on How Ultrathin Coating Layers on Active Particles Enhance Battery Performance Significantly”, 231st ECS Meeting, May 28 - June 2, 2017
Jie Li, Ming Leu, and Jonghyun Park, “3D Printed Hybrid Electrodes for Lithium-Ion Batteries ” 231st ECS Meeting, May 28 - June 2, 2017
Jie Li, Nima Lofti, Robert Lander, Jonghyun Park, “A Reduced-Order Battery Degradation Model for Battery Management Systems”, 231st ECS Meeting, May 28 - June 2, 2017
Lotfi, N., Li, J., Landers, R.G., and Park, J., 2017, “Li–Ion Battery State of Estimation Based on an Improved Single Particle Model,” American Control Conference, Seattle, Washington, May 24–26
Al-Amin+ Md, Tao+ W, Leu MC, Qin R*. Sensor data based models for workforce management in smart manufacturing. In Proceedings of the 2018 Institute for Industrial and Systems Engineering (IISE) Annual Conference, Orlando, Florida. 2018.
Morgan+ JC, Calvin+ MM, Sun Z, Qin R*. Energy sharing community as a decentralized complex adaptive system of systems. In Proceedings of 2018 Institute for Industrial and Systems Engineering (IISE) Annual Conference, Orlando, Florida. 2018.
Barnes+ II WL, Qin* R, Dagli CH. Enabling flexibility through forming and evolving system of systems. In Proceedings of the 2017 Complex Adaptive Systems Conference, Procedia Computer Science 114(2017), pp: 19-27. Chicago, Illinois. 2017. The second runner-up of the theoretical best paper award competition
Barnes+ II WL, Madison+ C, Linville+ K, Zhao B, Qin* R. Coordination of constituent systems for functionalizing systems of systems: An exploration. In Proceedings of the 2017 Complex Adaptive Systems Conference, Procedia Computer Science 114(2017), pp: 375-383. Chicago, Illinois. 2017.
Nagarajan+ BR, Qin R, Sun Z. Cost analysis for high voltage transmission line inspection using robot. In Proceedings of the American Society for Engineering Management 2017 International Annual Conference. Huntsville, Alabama. 2017.
Ali Albattat, Tansel Yucelen, S. Jagannathan, “An observer-free output feedback cooperative control architecture for linear multiagent systems with event-triggering”, Proc. of American Control Conference, pp. 1647-1652, June 2018.
Dzung Tran, Tansel Yucelen, S. Jagannathan, David W. Casbeer, “Distributed coestimation in heterogeneous sensor networks with time-varying active and passive node roles”, Proc. of American Control Conference, pp. 1033-1038, June 2018.
Vignesh Narayanan, Avimanyu Sahoo, S. Jagannathan, Optimal event-triggered control of nonlinear systems: A min-max approach”, Proc. of American Control Conference, pp.3441-3446, June 2018.
Krishnan Raghavan, S. Jagannathan, V. Samaranayake, “A multi-step nonlinear dimension-reduction Approach with applications to big data”, Proc. of the INNS BDDL, April 2018.
Krishnan Raghavan, S. Jagannathan, V. Samaranayake, “Direct error driven learning for deep neural networks with applications to big data”, Proc. of the INNS BDDL, April 2018.
A. Sahoo, V. Narayanan and S. Jagannathan, “'Optimal sampling and regulation of uncertain interconnected linear continuous-time systems”, Proc. of the IEEE Symposium on Adaptive Dynamic Programming and Reinforcement Learning, November 2017.
A. Sahoo, V. Narayanan and S. Jagannathan, “Optimal event-triggered control of uncertain linear networked control systems: A co-design approach'”, Proc. of the IEEE Symposium on Adaptive Dynamic Programming and Reinforcement Learning, November 2017.
Ali Albattat, T. Yucelen, B. Gruenwald, and S. Jagannathan, “Observer free output feedback cooperative control architecture for multivehicle systems”, ASME Conference on Dynamic Systems and Control, Oct 11-13, 2017.
T. Morrow, A. R. Hurson, and S. Sedigh Sarvestani. A multi-stage approach to personalized course selection and scheduling. In Proceedings of the 18th IEEE International Conference on Information Reuse and Integration (IRI 2017), San Diego, CA, Aug. 2017, invited.
Y. Y. Li, L. He, P. Shamsi, Y. R. Zheng, “An energy-harvesting power supply for underwater bridge scour monitoring sensors,” Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, Civil Infrastructure, and Transportation XII, Proceedings Volume 10599, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2018, Denver, Colorado.
- Alzahrani, P. Shamsi, M Ferdowsi, C. Dagli “Solar irradiance forecasting using deep recurrent neural networks,” IEEE 6th conference on Renewable Energy Research and Applications (ICRERA), Paris, France, 2017.
- Alzahrani, P. Shamsi,M Ferdowsi, C. Dagli “Modeling and simulation of a microgrid using feedforward neural networks,” IEEE 6th conference on Renewable Energy Research and Applications (ICRERA), Paris, France, 2017.
- Alzahrani, P. Shamsi, M Ferdowsi, C. Dagli “Chaotic behavior of DC-DC converters,” IEEE 6th conference on Renewable Energy Research and Applications (ICRERA), Paris, France, 2017.
- Alzahrani, P. Shamsi, M. Ferdowsi, “Boost converter with bipolar Dickson voltage multiplier cells,” IEEE 6th conference on Renewable Energy Research and Applications (ICRERA), Paris, France, 2017.
- Alzahrani, P. Shamsi , M. Ferdowsi, “An interleaved non-isolated DC-DC boost converter with diode-capacitor cells,” IEEE 6th conference on Renewable Energy Research and Applications (ICRERA), Paris, France, 2017.
- Alzahrani, P. Shamsi, M. Ferdowsi, “Single and interleaved split-pi DC-DC converter,” IEEE 6th conference on Renewable Energy Research and Applications (ICRERA), Paris, France, 2017.
- Alzahrani, P. Shamsi , M. Ferdowsi, “A Novel Interleaved Non-isolated High-gain DC-DC Boost Converter with Greinacher Voltage Multiplier Cells,” IEEE 6th conference on Renewable Energy Research and Applications (ICRERA), Paris, France, 2017.
- Mukherjee, V. R. Chowdhury, P. Shamsi and M. Ferdowsi, “A Voltage Sensorless Phase Locked Loop Structure for Single Phase Grid Connected Converter System,” 2017 IEEE Energy Conversion Congress and Expo (ECCE), Cincinnati, OH.
- Mukherjee, V. R. Chowdhury, P. Shamsi and M. Ferdowsi, “Control of a Three-Phase Inverter under Unbalanced Grid Conditions,” 2017 IEEE Energy Conversion Congress and Expo (ECCE), Cincinnati, OH.
- Mukherjee, V. R. Chowdhury, P. Shamsi and M. Ferdowsi, “Filter Capacitor Current Estimation and Grid Current Control in LCL based Grid Connected Inverter,” 2017 IEEE Energy Conversion Congress and Expo (ECCE), Cincinnati, OH.
- Alzahrani, P. Shamsi, M. Ferdowsi, C. H. Dagli, “Chaotic Behavior in High-Gain Interleaved Dc-dc Converters,” In Procedia Computer Science, Volume 114, 2017, Pages 408-416, ISSN 1877-0509.
- Alzahrani, P. Shamsi , M. Ferdowsi, C. H. Dagli, “Modeling and Simulation of Microgrid,” In Procedia Computer Science, Volume 114, 2017, Pages 392-400, ISSN 1877-0509.
- Alzahrani, P. Shamsi , C. H. Dagli, M. Ferdowsi, “Solar Irradiance Forecasting Using Deep Neural Networks,” In Procedia Computer Science, Volume 114, 2017, Pages 304-313, ISSN 1877-0509.
- R. Chowdhury, S. Mukherjee, P. Shamsi and M. Ferdowsi, "Control of a Three Phase Inverter Mimicking Synchronous Machine with Fault Ridethrough Capability," 2017 Ninth Annual IEEE Green Technologies Conference (GreenTech), Denver, CO, 2017, pp. 1-6.
- R. Chowdhury, S. Mukherjee, P. Shamsi and M. Ferdowsi, "Analysis and Design of a Three Phase Photovoltaic System with Battery Backup," 2017 Ninth Annual IEEE Green Technologies Conference (GreenTech), Denver, CO, 2017, pp. 157-162.
- R. Chowdhury, S. Mukherjee, P. Shamsi and M. Ferdowsi, "State Feedback Control to Damp Output LC Filter Resonance for Field Oriented Control of VSI Fed Induction Motor Drives," 2017 Ninth Annual IEEE Green Technologies Conference (GreenTech), Denver, CO, 2017, pp. 370-375.
M.M. Islam, Z. Sun, and R. Qin, 2018, Simulation-based investigation on economic feasibility of frequency regulation using aggregated electric vehicles in smart grid, In Proceedings of 2018 Institute for Industrial and Systems Engineering Annual Conference, May 19-22, Orlando, FL, U.S.
X. Zhong, M.M. Islam, H. Xiong, and Z. Sun, 2017, Design the capacity of onsite generation system with renewable sources for manufacturing plant, Procedia Computer Science, 114, 433-440, In Proceedings of Complex Adaptive Systems Conference, October 30-November 1, 2017, Chicago, IL, U.S.
M.M. Islam, Z. Sun, and C. Dagli, 2017, Reward/Penalty design in demand response for mitigating overgeneration considering the benefits from both manufacturers and utility company, Procedia Computer Science, 114, 425-432. In Proceedings of Complex Adaptive Systems Conference, October 30-November 1, 2017, Chicago, IL, U.S.
X. Zhong, M. M. Islam, N. Heffernan, H. Xiong, Z. Sun, 2017, Learning curve analysis using intensive longitudinal and cluster-correlated data, Procedia Computer Science, 114, 250-257. In Proceedings of Complex Adaptive Systems Conference, October 30-November 1, 2017, Chicago, IL, U.S.
M.M. Islam, Z. Sun, and C. Dagli, 2017, A general algorithm for assessing product architecture performance considering architecture extension in cyber manufacturing, Procedia Computer Science, 114, 384-391. In Proceedings of Complex Adaptive Systems Conference, October 30-November 1, 2017, Chicago, IL, U.S.
B. Nagarajan, R. Qin, Z. Sun, and M.M. Islam 2017, Cost analysis for high voltage transmission line inspection using robot, in Proceedings of 2017 International Annual Conference of American Society for Engineering Management, October 18-21, 2017, Huntsville, AB, U.S.
M.M. Islam, Z. Sun, and C. Dagli, 2017, Simulation-based investigations on electricity demand response for manufacturing systems to mitigate overgeneration due to high penetration of renewable sources, in proceedings of the 24th International Conference of Production Research, July 30-August 3, Poznan, Poland
Marketa Illetskova, Alex R. Bertels, Joshua M. Tuggle, Adam Harter, Samuel N. Richter, Daniel R. Tauritz, Samuel Mulder, Denis Bueno, Michelle Leger, and William M. Siever. Improving Performance of CDCL SAT Solvers by Automated Design of Variable Selection Heuristics. In Proceedings of the 2017 IEEE Symposium Series on Computational Intelligence (SSCI 2017), Honolulu, Hawaii, U.S.A., November 27 - December 1, 2017.
Islam Elnabarawy, Daniel R. Tauritz, and Donald C. Wunsch. Evolutionary Computation for the Automated Design of Category Functions for Fuzzy ART: An Initial Exploration. In Proceedings of the 19th Annual Conference Companion on Genetic and Evolutionary Computation (GECCO 2017), pages 1133-1140, Berlin, Germany, July 15-19, 2017.
Adam Harter, Daniel R. Tauritz, and William M. Siever. Asynchronous Parallel Cartesian Genetic Programming. In Proceedings of the 19th Annual Conference Companion on Genetic and Evolutionary Computation (GECCO '17), pages 1820-1824, Berlin, Germany, July 15-19, 2017.
Yongliang Yang, Hamidreza Modares, Kyriakos G. Vamvoudakis, Yi-Xin Yin, Donald C. Wunsch, “Model-Free Event-Triggered Containment Control of Multi-Agent Systems,” American Control Conference, Milwaukee, pp. 877-884, June 2018.
Yongliang Yang, Dawei Ding, Yixin Yin, Donald C. Wunsch, “Model-Free Semi-Global Output Regulation for Discrete-Time Linear Systems Subject To Input Amplitude Saturation,” Youth Academic Annual Conference of Chinese Association of Automation, Nanjing, China, May 2018, pp. 150-155.
Tayo Obafemi-Ajayi, Luke Settles, Yuqing Su, Gayla Olbricht, Cynthia Germeroth, T. Nicole Takahashi, Judith Miles, and Donald Wunsch, “Genetic Variant Analysis of Boys with Autism: a Pilot Study on Linking Facial Phenotype to Genotype,” BIBM 2017: IEEE International Conference on Bioinformatics and Biomedicine, November 2017.
Ayah Helal, Enas Jawdat, Islam Elnabarawy, Ashraf Abdelbar and Donald Wunsch, “Integrated Particle Swarm and Evolutionary Algorithm Approaches to the Quadratic Assignment Problem,” IEEE Symposium Series on Computational Intelligence, Honolulu, November 2017.
Tayo Obafemi-Ajayi, Khalid Al-Jabery, Lauren Salminen, David Laidlaw, Ryan Cabeen, Donald Wunsch and Robert Paul, “Neuroimaging Biomarkers of Cognitive Decline in Healthy Older Adults via Unified Learning,” IEEE Symposium Series on Computational Intelligence, Honolulu, November 2017.
Leonardo Enzo Brito da Silva and Donald C. Wunsch, “Validity Index-based Vigilance Test in Adaptive Resonance Theory Neural Networks,” IEEE Symposium Series on Computational Intelligence, Honolulu, November 2017.
Yongliang Yang, Yixin Yin, Donald C. Wunsch II and Hamidreza Modares, “Containment Control of Heterogeneous Systems with Active Leaders of Bounded Unknown Control using Reinforcement Learning,” IEEE Symposium Series on Computational Intelligence, Honolulu, November 2017.
George Shannon, James Levett, Steve Corns and Donald C. Wunsch II, “Cognitive Relevance,” IEEE Symposium Series on Computational Intelligence, Honolulu, November 2017.
Jacob A. Mueller, Donald C. Wunsch, Jonathan W. Kimball, “Active Stabilization of line-regulating converters with constant power loads,” North American Power Symposium (NAPS), 2017, pp. 1-6.
Yongliang Yang, Zhishan Guo, Donald Wunsch, and Yixin Yin, “Off-policy Reinforcement Learning for Robust Control of Discrete-time Uncertain Linear Systems,” 36th Chinese Control Conference, Dalian, China, pp. 2507-2512, July 26-28, 2017.
Islam Elnabarawy, Daniel R. Tauritz, and Donald C. Wunsch, “Evolutionary Computation for the Automated Design of Category Functions for Fuzzy ART: An Initial Exploration,” Proc. Workshop on Evolutionary Computation for the Automated Design of Algorithms (ECADA) at GECCO, The Genetic and Evolutionary Computation Conference, Berlin, July 15-19, 2017.
Yongliang Yang, Donald Wunsch, Zhishan Guo and Yixin Yin, “Hamiltonian-driven adaptive dynamic programming based on extreme learning machine,” International Symposium on Neural Networks, Sapporo, Japan, pp. 197 – 205, 2017.
[ICDM] Xin Xu, Yanjie Fu, Haoyi Xiong, Bo Jin, Xiaolin Li, Shuli Hu, MInghao Yin. Dr.Right!: Embedding-based Adaptively-weighted Mixture Multi-classification Model for Finding Right Doctors with Healthcare Experience Data. In Proceedings of the 18th IEEE International Conference on Data Mining (ICDM'18), Sentosa Island, Singapore, 2018.
[ICDM] Kunpeng Liu, Nitish Uplavikar, Yanjie Fu, Wei Jiang. Privacy-Preserving Multi-Task Learning. In Proceedings of the 18th IEEE International Conference on Data Mining(ICDM'18), Sentosa Island, Singapore, 2018.
[KDD] Pengyang Wang, Yanjie Fu, Jiawei Zhang, Pengfei Wang, Yu Zheng, Charu Aggarwal. You Are How You Drive: Peer and Temporal-Aware Representation Learning for Driving Behavior Analysis. In Proceedings of the 24th ACM SIGKDD International Conference on Knowledge Discovery and Data Mining (KDD'18), London, United Kingdom.
[IJCAI] Zijun Yao, Yanjie Fu, Bin Liu, Wangsu Hu, Hui Xiong. Representing Urban Functions through Zone Embeddings with Human Mobility Patterns. the 27th International Joint Conference on Artificial Intelligence, 2018, to appear.
[IJCAI] Haoyi Xiong, Wei Cheng, Yanjie Fu, Jiang Bian, Wenqinghu and Zhishan Guo. De-biasing Covariance-Regularized Discriminant Analysis. the 27th International Joint Conference on Artificial Intelligence, 2018, to appear.
[SDM] Pengyang Wang, Jiawei Zhang, Guannan Liu, Yanjie Fu, Charu Aggarwal. Ensemble-Spotting: Prioritizing Vibrant Communities via POI Embedding with Multi-view Spatial Graphs. In Proceedings of 2018 SIAM International Conference on Data Mining (SDM'18), San Diego, California, USA.
[SDM] Kunpeng Liu, Pengyang Wang, Jiawei Zhang, Yanjie Fu, Sajal K. Das. Modeling the Interaction Coupling of Multi-View Spatiotemporal Contexts for Destination Prediction. In Proceedings of 2018 SIAM International Conference on Data Mining (SDM'18), San Diego, California, USA, 2018.
[AAAI] Jiang Bian, Haoyi Xiong, Yanjie Fu, and Sajal K Das. CSWA: Aggregation-Free Community Sensing. In Proceedings of The Thirty-Second AAAI Conference on Artificial Intelligence (AAAI'18), 2018.
Liang Han and Zhaozheng Yin, “A Cascaded Refinement GAN for Phase Contrast Microscopy Image Super Resolution,” the 21th International Conference on Medical Image Computing and Computer Assisted Intervention (MICCAI), 2018.
Tianyi Zhao and Zhaozheng Yin, “Pyramid-based Fully Convolutional Networks for Cell Segmentation,” the 21th International Conference on Medical Image Computing and Computer Assisted Intervention (MICCAI), 2018
Wenjin Tao, Ze-Hao Lai, Ming C. Leu and Zhaozheng Yin. “Worker Activity Recognition in Smart Manufacturing Using IMU and sEMG Signals with Convolutional Neural Networks,” the 46th SME North American Manufacturing Research Conference, 2018.
Wenjin Tao, Ze-Hao Lai, Ming C. Leu, Zhaozheng Yin. “American Sign Language Alphabet Recognition Using Leap Motion Controller,” IISE Annual Conference, 2018. (IISE Best Paper Award on Data Analytics and Information Systems)
Tianyi Zhao, Dashan Gao, Jiao Wang, and Zhaozheng Yin, “Lung Segmentation in CT Images Using a Fully Convolutional Neural Network with Multi-instance and Conditional Adversary Loss,” IEEE International Symposium on Biomedical Imaging (ISBI), 2018. (NIH Student Paper and Travel Award, 10 out of 625 submissions)
Yunxiang Mao and Zhaozheng Yin, “Two-Stream Bidirectional Long Short-Term Memory for Mitosis Event Detection and Stage Localization in Phase-Contrast Microscopy Images,” the 20th International Conference on Medical Image Computing and Computer Assisted Intervention (MICCAI), 2017.
Liang Han and Zhaozheng Yin, “Refocusing Phase Contrast Microscopy Images,” the 20th International Conference on Medical Image Computing and Computer Assisted Intervention (MICCAI), 2017.
Liang Han and Zhaozheng Yin, “Transferring Microscopy Image Modalities with Conditional Generative Adversarial Networks,” CVPR Workshop on Computer Vision for Microscopy Image Analysis, 2017.
Haohan Li, Zhaozheng Yin, and Yingke Xu, “A Deep Learning Framework for Automated Vesicle Fusion Detection,” IEEE International Symposium on Biomedical Imaging (ISBI), 2017.
Non-Refereed Conference Papers
Ojha, Akhilesh, Long, Suzanna, Shoberg, Tom, and Corns, Steven M. “A Mathematical Programming Approach to Minimizing Post-Disaster Transportation Indirect Costs,” Proceedings of the 2018 IISE Annual Conference, K. Barker, D. Berry, C. Rainwater, eds., Orlando, FL, May 2018.
Ojha, Akhilesh, Long, Suzanna, Shoberg, Tom, and Corns, Steven M. “Improving the Efficiency of Vital Supply Distribution after an Extreme Event,” Proceedings of the AAG, New Orleans, LA, April 2018.
Kanwar, Bhanu, Corns, Steven M., Long, Suzanna, and Shoberg, Tom “Mapping Influential Nodes for Transportation Network Post-Disaster Restoration Planning Using Real-World Data,” Proceedings of the AAG, New Orleans, LA, April 2018.
Ojha, Akhilesh, Long, Suzanna, Shoberg, Tom, and Corns, Steven “A System Dynamics Approach for Estimating Post-disaster Transportation Network Failure Costs,” Proceedings of the American Society for Engineering Management 2017 International Annual Conference, Proceedings of the American Society for Engineering Management 2017 International Annual Conference E-H. Ng, B. Nepal, and E. Schott eds., Huntsville, AL, October 2017.
J. A. Mueller, D. C. Wunsch, and J. W. Kimball, "Active Stabilization of Line-regulating Converters with Constant Power Loads," in Proceedings of the North American Power Symposium, Wheeling, WV, 2017, pp. 1–6.
Anirudh Saini, Devin Burns and Yun Seong Song, “Velocity-Dependent Light Interaction Force Improves Standing Balance,” 40th International Engineering in Medicine and Biology Conference (EMBC), 2018.
Sindhu Reddy Alluri, Devin Burns and Yun Seong Song, “Light-touch based Virtual Cane for Assistance during Walking,” Hand, Brain and Technology, 2018.
Daniel R. Tauritz and John R. Woodward. Hyper-Heuristics Tutorial. In Proceedings of the 19th Annual Conference Companion on Genetic and Evolutionary Computation (GECCO 2017), pages 510-544, Berlin, Germany, July 15-19, 2017.
James A. Foster and Donald C. Wunsch, “The Ethical Status of an AI,” IEEE Computational Intelligence in Bioinformatics and Computational Biology conference, St. Louis, June 2, 2018.
Niklas Melton and Donald C. Wunsch, “Gene Expression Analysis using Adaptive Resonance Theory,” IEEE Computational Intelligence in Bioinformatics and Computational Biology conference, St. Louis, June 2, 2018.
2017
Refereed Conference Papers
Ko, H.-W., P. Bazzoli, J.A. Nisbett, L. Ma, D.A. Bristow, R.G. Landers, Y. Chen, S.G. Kapoor, and P.M. Ferreira, “Quasistatic Error Modeling and Model Testing for a 5-Axis Machine,” Proc. of the North American Manufacturing Research Conference, pp. , 2017.
He, L., R.G. Landers, and D.A. Bristow, “Modeling of Absolute Distance Meter Shift Inside a Laser Tracker,” Proc. of the ASME Int. Manufacturing Science and Engineering Conference, pp. , 2017.
Luo, J., J.M. Hostetler, D.A. Bristow, R.G. Landers, J.T. Goldstein, E.C. Kinzel, “Heat Transfer in Additive Manufacturing of Glass,” ASME Summer Heat Transfer Conference, pp. , 2017.
Mortada A. Aman and Egemen K. Çetinkaya, “Towards Cloud Security Improvement with Encryption Intensity Selection,” in Proceedings of the 13th IEEE/IFIP International Conference on the Design of Reliable Communication Networks (DRCN), Munich, March 2017. (Best Student Paper Award)
Tristan A. Shatto and Egemen K. Çetinkaya, “Spectral Analysis of Backbone Networks Against Targeted Attacks,” in Proceedings of the 13th IEEE/IFIP International Conference on the Design of Reliable Communication Networks (DRCN), Munich, March 2017.
Kim, Y., and D. Enke, “Instance Selection Using Genetic Algorithms for an Intelligent Ensemble Trading System,” Procedia Computer Science, Complex Adaptive Systems Conference, 2017.
Mehdiyev, N., D. Enke, P. Fettke, and P. Loos, “Time Series Classification Using Deep Learning for Process Planning: A Case from the Process Industry,” Procedia Computer Science, Complex Adaptive Systems Conference, 2017.
V. Roy Chowdhury, S. Mukherjee, P. Shamsi, and M. Ferdowsi, “State feedback control to damp output LC filter resonance for field oriented control of VSI fed induction motor drives,” in Proc. IEEE Green Technologies Conference (GreenTech), Denver, CO, Mar. 2017.
V. Roy Chowdhury, S. Mukherjee, P. Shamsi, and M. Ferdowsi, “Control of a three phase inverter mimicking synchronous machine with fault ride-through capability,” in Proc. IEEE Green Technologies Conference (GreenTech), Denver, CO, Mar. 2017.
V. Roy Chowdhury, S. Mukherjee, P. Shamsi, and M. Ferdowsi, “Analysis and design of a three phase photovoltaic system with battery back up,” in Proc. IEEE Green Technologies Conference (GreenTech), Denver, CO, Mar. 2017.
A. Alzahrani, P. Shamsi, and M. Ferdowsi “Analysis and design of bipolar Dickson Dc-Dc converter,” in Proc. IEEE Power and Energy Conference at Illinois (PECI), Urbana, IL, Feb. 2017.
S. Mukherjee, V. Roy Chowdhury, P. Shamsi, and M. Ferdowsi, “An improved control scheme for stand-alone inverters in the stationary frame of reference with a zero sequence controller,” in Proc. IEEE Power and Energy Conference at Illinois (PECI), Urbana, IL, Feb. 2017.
S. Mukherjee, P. Shamsi, and M. Ferdowsi, “Indirect voltage control of a stand-alone inverter,” in Proc. IEEE 32nd Applied Power Electronics Conference and Exposition (APEC), Tampa, FL, Mar. 2017.
S. Mukherjee, P. Shamsi, and M. Ferdowsi, “Estimation of parameters in single phase grid connected and stand-alone inverter system,” in Proc. IEEE 32nd Applied Power Electronics Conference and Exposition (APEC), Tampa, FL, Mar. 2017.
S. Mukherjee, P. Shamsi, and M. Ferdowsi, “Resonant controller based power-angle synchronization control in low voltage grids,” in Proc. IEEE 32nd Applied Power Electronics Conference and Exposition (APEC), Tampa, FL, Mar. 2017.
Zhishan Guo, Sai Sruti, Bryan Ward, and Sanjoy Baruah. Sustainability in Mixed-Criticality Scheduling. Proceedings of the 38th IEEE Real-Time Systems Symposium (RTSS), Paris, France, Dec. 2017.
Ying Zhang^, Zhishan Guo, Lingxiang Wang, Haoyi Xiong, and Zhenkai Zhang. Integrating Cache-Related Preemption Delay into Global-EDF Analysis for Multiprocessor Scheduling. Proceedings of the 14th IEEE International Conference On Embedded Software and Systems (ICESS), Sydney, Australia, Aug. 2017.
Sudharsan Vaidhun^, Samsil Arefin, Zhishan Guo, Haoyi Xiong and Sajal K. Das. Response Time in Mixed-Critical Pervasive Systems. Proceedings of the 14th IEEE International Conference on Ubiquitous Intelligence and Computing (UIC), San Francisco, USA, Aug. 2017.
Yongliang Yang, Zhishan Guo, Donald Wunsch, and Yixin Yin. Off-policy Reinforcement Learning for Robust Control of Discrete-time Uncertain Linear Systems. Proceedings of the 36th Chinese Control Conference (CCC), Dalian, China, July 2017.
Zhishan Guo, Ashikahmed Bhuiyan, Abusayeed Saifullah, Nan Guan, and Haoyi Xiong. Energy-Efficient Multi-Core Scheduling for Real-Time DAG Tasks. Proceedings of the 29th Euromicro Conference on Real-Time Systems (ECRTS), Dubrovnik, Croatia, June 2017. (DAG Task Generator, Artifact Evaluated)
Yongliang Yang, Donald Wunsch, Zhishan Guo, and Yixin Yin. Hamiltonian-driven Adaptive Dynamic Programming based on Extreme Learning Machine. Proceedings of the 14th International Symposium on Neural Networks (ISNN), Sapporo, Japan, June 2017
R. Moghadam, H. Modares, “Internal Model Principle for the Attacker,” accepted for publication in Conference on Decision and Control (CDC), 2017.
J. A. Mueller and J. W. Kimball, “Model-based determination of closed-loop input impedance for dual active bridge converters,” in Proc. IEEE Applied Power Electronics Conf., 2017, pp. 1039-1046.
G. Mpembele and J. Kimball, “Analysis of a standalone microgrid stability using generic Markov jump linear systems,” in Proc. IEEE Power and Energy Conference at Illinois, 2017.
Konur, D., M.M. Golias. 2017. Loading time flexibility in cross-docking systems. Proceedings of the 2017 Complex Adaptive Systems, Accepted. http://web.mst.edu/~konurd/CAS17KonurGolias.pdf
Konur, D. 2017. Towards developing a student-centered optimization course syllabus. Proceedings of the 2017 Industrial and Systems Engineering Research Conference (Eds. K. Coperich, B. Cudney, and H. Nembhard), Accepted. http://www.xcdsystem.com/iise/abstract/File7673/UploadFinalPaper_2349.pdf
Konur, D., J. Campbell, S.A. Monfared. 2017. Effects of sourcing in a (Q,R) model under carbon trading. Proceedings of the 2017 Industrial and Systems Engineering Research Conference (Eds. K. Coperich, B. Cudney, and H. Nembhard), Accepted. http://www.xcdsystem.com/iise/abstract/File7673/UploadFinalPaper_2423.pdf
Konur, D., M.M. Teeter. 2017. Shortest-distance self-charging path problem: formulation and application. Proceedings of the 2017 Industrial and Systems Engineering Research Conference (Eds. K. Coperich, B. Cudney, and H. Nembhard), Accepted. http://www.xcdsystem.com/iise/abstract/File7673/UploadFinalPaper_2431.pdf
Thind, S.S., S. Moradpour, D. Konur, S. Long, R. Qin. 2017. Statistical Comparison of Lane Shift Sign Configurations with Driving Simulation. Proceedings of the 2017 Industrial and Systems Engineering Research Conference (Eds. K. Coperich, B. Cudney, and H. Nembhard), Accepted. http://www.xcdsystem.com/iise/abstract/File7673/UploadFinalPaper_2467.pdf
Farhangi, H., D. Konur, C.H. Dagli. 2017. A Decomposition Approach for Bi-objective Mixed-Integer Linear Programming Problems. Proceedings of the 2017 Industrial and Systems Engineering Research Conference (Eds. K. Coperich, B. Cudney, and H. Nembhard), Accepted. http://www.xcdsystem.com/iise/abstract/File7673/UploadFinalPaper_2741.pdf
Konur, D., H. Farhangi. 2017. Set-based Min-max and Min-min Robustness for Multi-objective Robust Optimization. Proceedings of the 2017 Industrial and Systems Engineering Research Conference (Eds. K. Coperich, B. Cudney, and H. Nembhard), Accepted. http://www.xcdsystem.com/iise/abstract/File7673/UploadFinalPaper_2742.pdf
Luo, J., Hostetler, J., Goldstein, J., Bristow, D., Landers, R.G., and Kinzel, E., 2017, “Heat Transfer in Additive Manufacturing of Glass,” Heat Transfer Conference, Bellevue, Washington, July 9–14.
Ko, H–W., Bazzoli, P., Nisbett, J., Ma, L., Bristow, D.A., Landers, R.G., Chen, Y., Kapoor, S., and Bristow, P.F., 2017, “Quasistatic Error Modeling and Model Testing for a 5–Axis Machine,” SME North American Manufacturing Research Conference, Los Angles, California, June 4–8.
Li, H., Landers, R.G., and Bristow, D.A., 2017, “Modeling of Laser Tracker Internal Structure Thermal Deformation on Range Measurement,” ASME Manufacturing Science and Engineering Conference, Los Angles, California, June 4–8.
Lotfi, N., Li, J., Landers, R.G., and Park, J., 2017, “Li–Ion Battery State of Estimation Based on an Improved Single Particle Model,” American Control Conference, Seattle, Washington, May 24–26.
Wei Jiang, Dan Lin, Feng Li, Elisa Bertino, "No One Can Track You: Randomized Authentication in Vehicular Ad-hoc Networks", IEEE International Conference on Pervasive Computing and Communications (PerCom), 2017.
Katrina Ward, Dan Lin and Sanjay Madria, ``MELT: Mapreduce-based Efficient Large-scale Trajectory Anonymization", 29th International Conference on Scientific and Statistical Database Management (SSDBM), 2017.
Douglas Steiert, Dan Lin, Quincy Conduff, Wei Jiang, ``A Location-Privacy Approach for Continuous Queries" (Poster), 22th ACM symposium on access control models and technologies (SACMAT), 2017.
Dan Lin, Anna Squicciarini, Ali Hurson, ``Real-time Detection of Illegal File Transfers in the Cloud" (Poster), IEEE International Conference on Distributed Computing Systems (ICDCS), 2017.
Antony, E., Corns, S., Long, S.K., and Shoberg, T., 2017. Developing Restoration Schemes for a Bimodal Transportation Network in the Event of a Disaster, Institute of Industrial and Systems Engineering, Annual Conference, Pittsburg, Pennsylvania. Abstract only.
Ojha, A., Long, S., Shoberg, T., and Corns, S., 2017. Using Interoperability to Estimate Extreme Event Failure Costs, Institute of Industrial and Systems Engineering, Annual Conference, Pittsburg, Pennsylvania. Abstract only.
Pérez-Lespier, L., Long, S., Shoberg, T., and Corns, S., 2017. Sustainability Modeling of Physical Inter-dependencies between Maritime Shipping and the Environment, Institute of Industrial and Systems Engineering, Annual Conference, Pittsburg, Pennsylvania. Abstract only.
Corns, S., Antony, E., Long, S, and Shoberg, T., 2017. Adaptive Architecture for Complex Restoration Schemes, Association of American Geographers, Annual Conference, Boston, Massachusetts. Abstract only.
Long, S., Pérez Lespier, L., Shoberg, T., and Corns, S., 2017. Using Physical Interdependencies to Mitigate Environmental Damage from Maritime Shipping, Association of American Geographers, Annual Conference, Boston, Massachusetts. Abstract only.
Barnes+ II, WL, Qin* R, Dagli CH. Enabling flexibility through forming and evolving system of systems. In Proceedings of The 2017 Complex Adaptive Systems Conference. Chicago, Illinois. 2017.
Barnes+ II, WL, Madison+ C, Linville+ K, Zhao B, Qin R. Coordination of constituent systems for functionalizing systems of systems: An exploration. In Proceedings of the 2017 Complex Adaptive Systems Conference. Chicago, Illinois. 2017.
Nagarajan+ BR, Qin R, Sun Z. Cost analysis for high voltage transmission line inspection using robot. In Proceedings of the American Society for Engineering Management 2017 International Annual Conference. Huntsville, Alabama. 2017.
Thind+ SS, Moradpour+ S, Konur D, Long SK, Qin R. Statistical comparison of lane shift sign configurations with driving simulation. In Proceedings of the 2017 Industrial and Systems Engineering (IISE) Conference. Pittsburgh, Pennsylvania. 2017.
Vignesh Narayanan and S. Jagannathan, “Online reinforcement with exploration for distributed control”, Proc. of the IEEE Joint Conference on Neural Networks, pp. 4022-4027, May 2017.
Krishnan Raghavan, S. Jagannathan, and Samarnayake, “Deep learning inspired prognostics scheme for applications generating big data”, Proc. of the IEEE Joint Conference on Neural Networks, pp. 3296-3302, May 2017.
Nathan Szanto, Vignesh Narayanan and S. Jagannathan, “Event-sampled control of quadrotor unmanned aerial vehicle”, Proc. of American Controls Conference, pp. 2956-2961, May 2017.
H. Guzey, Vignesh Narayanan, T. Dierks, S. Jagannathan, and Levent Acar, “Distributed consensus-based event-triggered approximate control of nonholonomic mobile robot formations”, Proc. of American Controls Conference, pp. 3194-3199, May 2017.
J. D. Peterson, T. Yucelen, S. Jagannathan, Eduardo Pasiliao, “Event-triggered active-passive dynamic consensus filters”, Proc. of American Controls Conference, pp. 3900-3905, May 2017.
D. Tran, T. Yucelen, S. Jagannathan, “On local design and execution of a distributed input and state estimation architecture for heterogeneous sensor networks”, Proc. of American Controls Conference, pp. 3874-3879, May 2017.
F. Dababneh, R. Shah, L. Li, and Z. Sun, 2017, “Sensitivity analysis of joint energy and maintenance planning considering production throughput requirements,” in Proceedings of ASME 2017 International Manufacturing Science and Engineering Conference (MSEC), June 4-8, 2017, Los Angeles, CA, USA.
R. Kesharwani, X. Song, Y. Yang, Z. Sun, M. Zhang, and C. Dagli, 2017, “Investigation of relationship between sugar yield and particle size in biofuel manufacturing,” in Proceedings of ASME 2017 International Manufacturing Science and Engineering Conference (MSEC), June 4-8, 2017, Los Angeles, CA, USA.
R. Kesharwani, M. M. Islam, X. Song, Z. Sun, M. Zhang, and C. Dagli, 2017, “A case study investigating the environmental impact of pelleting in cellulosic biofuel manufacturing,” in Proceedings of ASME 2017 International Manufacturing Science and Engineering Conference (MSEC), June 4-8, 2017, Los Angeles, CA, USA.
R. Li, and Z. Sun, 2017, “A data-driven approach to detect mechanical faults in wind turbine gearbox,” in Proceedings of ASME 2017 International Manufacturing Science and Engineering Conference (MSEC), June 4-8, 2017, Los Angeles, CA, USA.
Yongliang Yang, Donald Wunsch, Zhishan Guo and Yixin Yin, “Hamiltonian-driven adaptive dynamic programming based on extreme learning machine,” International Symposium on Neural Networks, Dalian, China, 2017.
Seaar Al-Dabooni and Donald Wunsch, “Mobile Robot Control Based on Hybrid Neuro-Fuzzy Value Gradient Reinforcement Learning,” Proc. IEEE / INNS International Joint Conference on Neural Networks, Anchorage, Alaska, 2017.
Yongliang Yang, Donald Wunsch and Yixin Yin, “Hamiltonian-driven Adaptive Dynamic Programming for Nonlinear Discrete-Time Dynamic Systems,” Proc. IEEE / INNS International Joint Conference on Neural Networks, Anchorage, Alaska, 2017.
P. Zhao, J. Wu, Z. Wang, Y.R. Zheng, “Sparsity-Aided Iterative Receiver for Large Scale Under-Determined MIMO Systems,” IEEE International Workshop on Signal Processing Advances in Wireless Communications (SPAWC), Sapporo, Japan, July 3-6, 2017.
Lu, X. Gao, Y.R. Zheng, and C. Xiao, “Manifold Optimization Algorithms for SWIPT over MIMO Broadcast Channels with Discrete Input Signals,” IEEE ICC, Paris, France, May 21-24, 2017. Pp 1-6.
Non-Refereed Conference Papers
Zhishan Guo. Guaranteeing some service upon mode switch in mixed-criticality systems. Mixed Criticality on Multicore/Manycore Platforms (Dagstuhl Seminar 17131), Dagstuhl Reports, March 2017.
Zhishan Guo. Regarding the Optimality of Speedup Bounds of Mixed-Criticality Schedulability Tests. Mixed Criticality on Multicore/Manycore Platforms (Dagstuhl Seminar 17131), Dagstuhl Reports, March 2017.
Moradpour, S., S. Long, R. Qin, D. Konur, M. Leu. 2017. Data Analytics and Pattern Recognition Methods for Work Zone Simulator Studies. Transportation Research Board 96th Annual Meeting, Compendium of Papers (Monograph). https://trid.trb.org/view.aspx?id=1437445
“3D Bioprinting of Polymer Bioactive Glass Composite and MSCs for Bone Repair,” Krishna Kolan, Caroline Murphy, Jakeb Baldridge, Julie Semon, Delbert Day and Ming Leu, paper presented at the 3D Bioprinting: Physical and Chemical Processes Conference, Winston Salem, NC, May 2-3, 2017.
2016
Refereed Conference Papers
Andreas Mauthe, David Hutchison, Egemen K. Çetinkaya, Ivan Ganchev, Jacek Rak, James P.G. Sterbenz, Matthias Gunkel, Paul Smith, and Teresa Gomes,
“Disaster-Resilient Communication Networks: Principles and Best Practices,”
in Proceedings of the 8th IEEE/IFIP International Workshop on Reliable Networks Design and Modeling (RNDM), Halmstad, September 2016, pp. 1 – 10.
Anuja S. Bhave, Mariesa L. Crow, and Egemen K. Çetinkaya,
“Robustness of Power Grid Topologies Against Centrality-Based Attacks,”
in Proceedings of the Resilience Week Symposia (RWS), Chicago, IL, August 2016, pp. 115 – 118.
Mortada A. Aman and Egemen K. Çetinkaya,
“DSB-SEIS: A Deduplicating Secure Backup System with Encryption Intensity Selection,”
4th ACM Workshop on Distributed Cloud Computing (DCC), Chicago, IL, July 2016.
Anandan, S., Dhaliwal, G. S., Chandrashekhara, K., Berkel, T. R. and Castle, J., "Progressive Damage Modeling of Sandwich Composites Under Edgewise Compression," Paper No. TP16-0149, Composites and Advanced Materials Expo (CAMX) Conference, Anaheim, CA, September 26 - 29, 2016.
Meinders, R., Nicholas, J., Taylor, G. and Chandrashekhara, K., "Evaluation of Continuous Fiber–Reinforced Ceramic Composites Fabricated Using High Pressure Resin Transfer Molding," Paper No. TP16-0150, Composites and Advanced Materials Expo (CAMX) Conference, Anaheim, CA, September 26 - 29, 2016.
Taylor, G., Wang, X., Mason, L., Leu, M. C. and Chandrashekhara, K., "Investigation of Ultem 1010 FDM Sparse-Build Parts Using Design of Experiments and Numerical Simulation," Paper No. TP16-0151, Composites and Advanced Materials Expo (CAMX) Conference, Anaheim, CA, September 26 - 29, 2016.
Huo, Z., Taylor, G. and Chandrashekhara, K., "Numerical Simulation of a Multilayer Transparent Composite Panel Under Impact,” Paper No. TP16-0157, Composites and Advanced Materials Expo (CAMX) Conference, Anaheim, CA,September 26 - 29, 2016.
Hussein, R. M., Anandan, S., Dhaliwal, G. S. and Chandrashekhara, K., "Flexural Behavior of Cross-Ply Thermally Aged Bismaleimide Composites," Paper No. TP16-0155, Composites and Advanced Materials Expo (CAMX) Conference, Anaheim, CA, September 26-29, 2016.
Dhaliwal, G. S., Anandan, S., Chandrashekhara, K., Dudenhoeffer, N. and Nam, P., "Fabrication and Testing of Soy-Based Polyurethane Foam," Paper No. TP16-0148, Composites and Advanced Materials Expo (CAMX) Conference,Anaheim, CA, September 26 - 29, 2016.
Spratt, M., Newkirk, J. W. and Chandrashekhara, K., "Fabrication of Metal Matrix Syntactic Foams by a Laser Additive Manufacturing Process," Materials Science and Technology Conference, pp. 1 - 9, Salt Lake City, UT, October 23 - 27,2016.
Motaparti, K. P., Taylor, G.A., Leu, M.C., Chandrashekhara, K., Castle, J., and Matlack, M., Effects of Build Parameters on Compression Properties for ULTEM 9085 Parts by Fused Deposition Modeling," pp. 964-977, Proceedings of Annual International Solid Freeform Fabrication Symposium, Austin, TX, August 8 - 10, 2016.
Meng, S., Mason, L., Wang, X., Taylor, G., Leu, M., Chandrashekhara, K., Castle, J., and Matlack, M., "Effect of Sparse build Internal Structure on Performance of Fused Deposition Modeling Tools," pp. 2337-2347, Proceedings of Annual International Solid Freeform Fabrication Symposium, Austin, TX, August 8 - 10, 2016.
Steven M. Corns, Suzanna Long and Tom Shoberg, (2016) “Infrastructure System Restoration Planning Using Evolutionary Algorithms,” 26th Annual International Symposium of the International Council on Systems Engineering (INCOSE2016), DOI: 10-1002/j.2334-5837.2016.00272.x.
Gene Lesinski, Steven M. Corns, and Cihan H. Dagli (2016) “Application of Neural Network to Predict Graduation Success at the United States Military Academy,” Procedia Computer Science 93:375-382. DOI: 10.1016/j.procs.2016.09.348.
Gene Lesinski, Steven M. Corns, and Cihan H. Dagli (2016) “A fuzzy genetic algorithm approach to generate and assess meta-architectures for non-line of site fires battlefield capability,” Proceedings of the 2016 IEEE Congress on Evolutionary Computation.
S. Das, S. K. Das, and S. Ghosh, “Inferring Future Links in Large Scale Networks,” Proceedings of 41st Annual IEEE Conference on Local Computer Networks (LCN), Dubai, UAE, pp. 244-252, 2016.
S. Das, J. Leopold, S. Ghosh, and S. K. Das, “Graph Partitioning in Parallelization of Large Scale Networks,” Proceedings of 41st Annual IEEE Conference on Local Computer Networks (LCN), Dubai, UAE, Nov 2016.
C. Wang, F. Ma, Y. Wang, D. De and S. K. Das, “How to High-efficiently Acquire Activity Pattern in Smart Environment,” Proceedings of IEEE Conference on Sustainable Computing and Communications (SustainCom), Atlanta, GA, pp. 501-508, Oct 2016.
S. Das, S. K. Das, and S. Ghosh, “Leveraging Contact Pattern to Predict Future Contact Pattern in Mobile Networks,” Proceedings of 8th International Workshop on Hot Topics in Planet-scale mobile computing and online Social networking (HotPOST’16), Paderborn, Germany, July 2016.
F. Restuccia, S. K. Das, S. C. Thandu, and S. Chellappan, “RescuePal: A Smartphone-based System to Discover People in Emergency Scenarios,” Proceedings of 5th Workshop on Internet of Things: Smart Objects and Systems (IoT-SoS), Coimbra, Portugal, June 2016 (in conjunction with IEEE WoWMoM 2016).
F. Restuccia, A. Saracino, S. K. Das, and F. Martinelli, “LVS: A WiFI-based System to Tackle Location Spoofing in Location-based Services,” Proceedings of IEEE Symposium on a World of Wireless Mobile Multimedia Networks (WoWMoM), Coimbra, Portugal, June 2016.
A. Nazi, M. Raj, M. Di Francesco, P. Ghosh, and S. K. Das, “Efficient Communications in Wireless Sensor Networks Based on Biological Robustness,” Proceedings of IEEE International Conference on Distributed Computing in Sensor Systems (DCOSS), Washington DC, pp. 161-168, May 2016.
S. Srinivasan, S. Bhowmick, and S. K. Das, “Application of Graph Sparsification in Developing Parallel Algorithms for Updating Dynamic Networks,” Proceedings of IPDPS Workshop on Graph Algorithm Building Blocks (GABB), Chicago, pp. 885-891, May 2016.
R. Kumar, A. Bayliff, D. De, A. Evans, S. K. Das, and M. Makos, “Care-Chair: Sedentary Activities and Health Assessment with Smart Sensing on Chair Backrest,” Proceedings of 2nd IEEE International Conference on Smart Computing (SMARTCOMP), St Louis, Missouri, May 2016.
R. Barnwal, N. Ghosh, S. Ghosh, and S. K. Das, “Enhancing Reliability of Vehicular Participatory Sensing Network: A Bayesian Approach,” Proceedings of 2nd IEEE International Conference on Smart Computing (SMARTCOMP), St Louis, Missouri, May 2016.
F. Gu, J. Niu, and S. K. Das, Z. He, “Efficient Method of Detecting Breathing Frequency While Running,” Proceedings of 2nd IEEE International Conference on Smart Computing (SMARTCOMP), St Louis, Missouri, May 2016.
A. Sturaro, S. Silvestri, M. Conti, and S. K. Das, “Towards a Realistic Model for Failure Propagation in Interdependent Networks,” Proc. International Conference on Computing, Networking and Communications (ICNC), Hawaii, 2016.
Kim, Y., and D. Enke, “Using Neural Networks to Forecast Volatility for an Asset Allocation Strategy based on the Target Volatility,” Procedia Computer Science, Vol. 95 (2016): 281-286. Best Paper Winner.
Mehdiyev, N., D. Enke, P. Fettke, and P. Loos, “Evaluating Forecasting Methods by Considering Different Accuracy Measures,” Procedia Computer Science, Vol. 95 (2016): 264-271.
Wiles, P.S., and D. Enke, “Continuous Futures Contract Data for Computational Intelligence,” Proceedings of the 2016 American Society of Engineering Management conference, Concord, NC, October 2016.
S. Mukherjee, P. Shamsi, and M. Ferdowsi, “Improved virtual inertia based control of a grid connected voltage source converter with fault ride-through ability,” in Proc. IEEE 48th North American Power Symposium (NAPS), Denver, CO, Sept. 2016, pp. 1-5.
S. Mukherjee, P. Shamsi, and M. Ferdowsi, “An improved control scheme for stand-alone DFIG with unbalanced and nonlinear loads using proportional-resonant controllers,” in Proc. IEEE 48th North American Power Symposium (NAPS), Denver, CO, Sept. 2016, pp. 1-6.
S. Mukherjee, P. Shamsi, and M. Ferdowsi, “Small signal modeling and control of a grid tied converter without a synchronization unit,” in Proc. IEEE 31st Applied Power Electronics Conference and Exposition (APEC), Long Beach, CA, Mar. 2016, pp. 2687-2692.
A. Shen, P. Shamsi, and M. Ferdowsi, “Ultra-low ripple inverters for distributed generation applications,” in Proc. Applied Power Electronics Conference and Exposition (APEC), Long Beach, CA, Mar. 2016, pp. 1962-1966.
Gosavi. Targets for Characterizing Risky Behaviours: Analysis and A Case Study on Home Affordability. Proceedings of the Annual Conference of the American Society of Engineering Management, Charlotte, NC, 2016
*A. Ghazanfari, W. Li, M. Leu, Y. Zhuang, and J. Huang. "Freeform extrusion fabrication of advanced ceramic components with embedded sapphire optical fiber sensors." ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), 2016. (Best student paper award)
Y. Song, L.Yuan, L. Hua, Q. Zhang, J. Lei, J. Huang, and H. Xiao. "Ferrofluid-based optical fiber magnetic field sensor fabricated by femtosecond laser irradiation." In SPIE OPTO, pp. 97501U-97501U. International Society for Optics and Photonics, 2016.
L. Hua, Y. Song, J. Huang, B. Cheng, W. Zhu, and H. Xiao. "Femtosecond laser fabricated multimode fiber sensors interrogated by optical-carrier-based microwave interferometry technique for distributed strain sensing." In SPIE OPTO, pp. 97540V-97540V. International Society for Optics and Photonics, 2016.
L. Yuan, Y. Zhang, J. Huang, J. Liu, Y. Song, Q. Zhang, J. Lei, and H. Xiao. "Femtosecond laser processing of transparent materials for assembly-free fabrication of photonic microsensors." In SPIE LASE, pp. 97351C-97351C. International Society for Optics and Photonics, 2016.
J. Liu, L. Yuan, J. Huang, and H. Xiao. "A cantilever based optical fiber acoustic sensor fabricated by femtosecond laser micromachining." In SPIE LASE, pp. 973804-973804. International Society for Optics and Photonics, 2016.J. Huang, L. Hua, L. Yuan, “Optical fiber based microwave-photonic interferometric sensors,” SPIE Proceedings, Photonics West, 13–18 Feb. 2016, San Francisco, California, USA.
Huchun, Kui Ren and Wei Jiang, “Outsourceable Privacy-Preserving Power Usage Control in a Smart Grid", 29th Annual IFIP WG 11.3 Working Conference on Data and Applications Security and Privacy, Fairfax, VA, July 13 - 15, 2015.
J. A. Mueller and J. W. Kimball, “An Accurate Method of Energy Use Prediction for Systems with Known Consumption,” in Proceedings of the 3rd International Workshop on Non-Intrusive Load Monitoring, Vancouver, Canada, 2016.
W. Zhang and J. W. Kimball, "DC-DC Converter Based Photovoltaic Simulator with a Double Current Mode Controller," in Proceedings of the Power & Energy Conference at Illinois, 2016.
J.M. Hostetler, J.T. Goldstein, A.M. Urbas, R.E. Gutierrez, T.E. Bender, C.S. Wojnar, E.C. Kinzel, “Selective Laser Sintering of Low Density, Low Coefficient of Thermal Expansion Silica Parts,” Solid Freeform Fabrication Symposium, Austin TX August (2016).
J.D. Pribe, B.M. West, M.L. Gegel, T. Hartwig, T. Lunn, B. Brown, D.A. Bristow, R.G. Landers, E.C. Kinzel, “Modal Response as a Validation Technique for Metal Parts Fabricated with Selective Laser Melting,” Solid Freeform Fabrication Symposium, Austin TX August (2016).
Pribe, J.D., West, B.M., Gegel, M.L., Hartwig, T., Lunn, T., Brown, B., Bristow, D.A., Landers, R.G., and Kinzel, E.C., 2016, “Modal Response as a Validation Technique for Metal Parts Fabricated with Selective Laser Melting,” Twenty Seventh Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 8–10, pp. 151–174.
Sammons, P.M., Bristow, D.A., and Landers, R.G., 2016, “Frequency Domain Uncertainty Modeling and Quantification of the Laser Metal Deposition Process,” Dynamic Systems and Control Conference, Minneapolis, Minnesota, October 12–14.
Tang, A., Fan, Y., Li, S., and Landers, R.G., 2016, “Experimental and Numerical Studies of Wire Vibrations in Bonded Abrasive Wire Saw Processing,” International Symposium on Flexible Automation, Cleveland, Ohio, August 1–3, pp. 127–132.
Li, S., Wang, J., Tang, A., and Landers, R.G., 2016, “Force Modeling of Silicon Monocrystal Wire Saw Processing,” International Symposium on Flexible Automation, Cleveland, Ohio, August 1–3, pp. 133–140.
Ma, L., Bazzoli, P., Sammons, P.M., Bristow, D.A., and Landers, R.G., 2016, “Modeling and Compensation of Joint–Dependent Kinematic Errors in Robotic Manipulators,” International Symposium on Flexible Automation, Cleveland, Ohio, August 1–3, pp. 458–464.
Zomorodi Moghadam, H. and Landers, R.G., 2016, “Extrusion Based Additive Manufacturing using Explicit Model Predictive Control,” American Control Conference, Boston, Massachusetts, July 6–8.
Luo, J., Gilbert, L., Bristow, D.A., Landers, R.G., Kinzel, E.C., Goldstein, J.T., and Urbas, A.M., 2016, “Additive Manufacturing of Glass for Optical Applications,” SPIE Photonics West, San Francisco, California, January 28–February 2, paper 9738–28 (Applications of 3D Printing Best Paper Award).
Cong Liao, Anna Squicciarini, Dan Lin, ``LAST-HDFS: Location-Aware Storage Technique for Hadoop Distributed File System", IEEE International Conference on Cloud Computing (CLOUD), (acceptance rate=16.7%), 2016.
Douglas McGeehan, Dan Lin, Sanjay Madria, ``ChitChat: An Effective Message Delivery Method in Sparse Pocket-Switched Networks", 36th IEEE International Conference on Distributed Computing Systems (ICDCS), 2016. Nathan Szanto, Vignesh Narayanan and S. Jagannathan, “Event-sampled direct adaptive NN state-feedback control of uncertain strict-feedback system”, Proc. of the IEEE International Conference on Decision and Control, pp. 3395-3400, December 2016.
Vignesh Narayanan and S. Jagannathan, “Approximate optimal distributed control of uncertain nonlinear interconnected systems with event-sampled feedback”, Proc. of the IEEE International Conference on Decision and Control, pp. 5827-5832, December 2016.
Vignesh Narayanan and S. Jagannathan, “Event-sampled adaptive neural network control of robot manipulators”, Proc. of the IEEE International Joint Conference on Neural Networks, pp. 4941-4946, July 2016.
Haifeng and S. Jagannathan, “Neural network-based attack detection in nonlinear networked control systems”, Proc. of the IEEE International Joint Conference on Neural Networks, pp. 4249-4254, July 2016.
B. Talaei, S. Jagannathan, J. Singler, “Boundary control of two dimensional Burgers PDE using approximate dynamic programming”, Proc. of the American Controls Conference, pp. 5243-5248, July 2016.
Vignesh Narayanan and S. Jagannathan, “Distributed event-sampled approximate optimal control of interconnected affine nonlinear continuous-time systems”, Proc. of the American Controls Conference, pp. 3044-3049, July 2016.
Jia Cai and S. Jagannathan, “Fault isolation in distributed parameter systems modeled by parabolic partial differential equations”, Proc. of the American Controls Conference, pp. 4356-4361, July 2016.
Gegesky, M., Liou, F. and Newkirk, J., "Proposed Hybrid Processes for Part Building Using Fusion Welding and Friction Stir Processing," Annual International Solid Freeform Fabrication Symposium, Austin, TX, August 8 - 10, 2016.
Karnati, S. and Liou, F., "Investigation of Tensile Properties of Bulk and SLM Fabricated 304L Stainless Steel Using Various Gage Length Specimens," Annual International Solid Freeform Fabrication Symposium, Austin, TX, August 8 - 10, 2016.
Li, W., Zhang, J., Karnati, S., Zhang, Y., Liou, F., Newkirk, J., Taminger, K. and Seufzer, W., "Modeling and Experimental Investigation of Pre-Mixed Multi-Powder Flow in Fabricating Functional Gradient Material by Laser Metal Deposition Process," Annual International Solid Freeform Fabrication Symposium, Austin, TX, August 8 - 10, 2016.
N. Jarus, S. Sedigh Sarvestani, and A. R. Hurson. Models, metamodels, and model transformation for cyber-physical systems. In Proceedings of the 7th International Green and Sustainable Computing Conference, Hangzhou, China, Nov. 2016.
Alobaidi, S. Sedigh Sarvestani, and A. R. Hurson. Survivability analysis and recovery support for smart grids. In Proceedings of the 4th International Symposium on Resilient Cyber Systems, Chicago, USA, Aug. 2016, winner of best paper award.
T. Morrow, S. Sedigh Sarvestani, and A. R. Hurson. Algorithmic decision support for personalized education. In Proceedings of the 17th IEEE International Conference on Information Reuse and Integration (IRI 2016), Pittsburgh, USA, July 2016, invited.
K. Marashi, S. Sedigh Sarvestani, and A. R. Hurson. Quantification and analysis of inter- dependency in cyber-physical systems. In Proceedings of the 3rd International Workshop on Reliability and Security Aspects for Critical Infrastructure (ReSA4CI 2016), in conjunction with the 46th IEEE/IFIP International Conference on Dependable Systems and Networks (DSN 2016), Toulouse, France, June 2016.
Yan, L., Li, W., Chen, X. and Liou, F.,"Simulation of Cooling Rate Effects on Ti-6Al-4V Microstructure Tailoring in Direct Laser Deposition," Annual International Solid Freeform Fabrication Symposium, Austin, TX, August 8 - 10, 2016.
Liu, R., Wang, Z., Zhang, Y., Sparks, T. and Liou, F., "A Smooth Toolpath Generation Method for Laser Metal Deposition," Annual International Solid Freeform Fabrication Symposium, Austin, TX, August 8 - 10, 2016.
Wang, F., Liou, F. and Sparks, T., "Integration of Voxel Based and Source Based Representation for Computer Aided Design of Functional Gradient Materials," Annual International Solid Freeform Fabrication Symposium, Austin, TX, August 8 - 10, 2016.
Chen, X., Yan, L., Li, W., Liou, F. and Newkirk, J., "Effect of Powder Particle Size on the Fabrication of Ti-6Al-4V Using Laser Metal Deposition from Elemental Powder Mixture," Annual International Solid Freeform Fabrication Symposium, Austin, TX, August 8 - 10, 2016.
S. Mukherjee, P. Shamsi and M. Ferdowsi, "Improved virtual inertia based control of a grid connected voltage source converter with fault ride-through ability," 2016 North American Power Symposium (NAPS), Denver, CO, 2016, pp. 1-5.
S. Mukherjee, P. Shamsi and M. Ferdowsi, "An improved control scheme for a standalone DFIG with unbalanced and nonlinear loads using proportional-resonant controllers," 2016 North American Power Symposium (NAPS), Denver, CO, 2016, pp. 1-6.
P. Shamsi, "Near Zero-Ripple Switched Reluctance drives," 2016 IEEE Transportation Electrification Conference and Expo (ITEC), Dearborn, MI, 2016, pp. 1-6.
S. Mukherjee, P. Shamsi, M. Ferdowsi, "Small signal modeling and control of a grid tied converter without a synchronization unit," 2016 IEEE Applied Power Electronics Conference and Exposition (APEC), Long Beach, CA, 2016, pp. 2687-2692.
A. Shen, P. Shamsi, M. Ferdowsi, "Ultra-low ripple inverters for distributed generation applications," 2016 IEEE Applied Power Electronics Conference and Exposition (APEC), Long Beach, CA, 2016, pp. 1962-1966.
Md. Monirul Islam, Zeyi Sun, and Xufeng Yao, “Simulation-Based Investigation for the Application of Microgrid with Renewable Sources in Manufacturing Systems towards Sustainability, in Proceedings of 2016 International Annual Conference of the American Society for Engineering Management, October 26-29, 2016, Charlotte, NC, USA.
Rajkamal Kesharwani, Cihan Dagli, Zeyi Sun, “Application of Neural Network in Shop Floor Quality Control in a Make to Order Business,” in Proceedings of Complex Adaptive Systems, Publication 6, November 2-4, 2016, Los Angeles, CA, USA.
Jhi-Young Joo, Sriram Raghavan, and Zeyi Sun, “Integration of sustainable manufacturing systems into smart grids with high penetration of renewable energy resources,” in Proceedings of 2016 IEEE Annual Green Technologies Conference, April 6-8, 2016, Kansas City, MO, USA.
Xufeng Yao, Zeyi Sun, Dong Wei, and Lingyun Wang, “Joint maintenance and energy management in manufacturing systems: prospect discussion, challenge analysis, and a case study,” in Proceedings of ASME 2016 Manufacturing Science and Engineering Conference, June 27-July 1, 2016, Blacksburg, VA, USA.
Aaron S. Pope, Daniel R. Tauritz and Alexander D. Kent. Evolving Random Graph Generators: A Case for Increased Algorithmic Primitive Granularity. In Proceedings of the 2016 IEEE Symposium Series on Computational Intelligence (IEEE SSCI 2016), Athens, Greece, December 6-9, 2016.
Aaron S. Pope, Daniel R. Tauritz and Alexander D. Kent. Evolving Multi-level Graph Partitioning Algorithms. In Proceedings of the 2016 IEEE Symposium Series on Computational Intelligence (IEEE SSCI 2016), Athens, Greece, December 6-9, 2016.
Alex R. Bertels, and Daniel R. Tauritz. Why Asynchronous Parallel Evolution is the Future of Hyper-heuristics: A CDCL SAT Solver Case Study. In Proceedings of the 18th Annual Conference Companion on Genetic and Evolutionary Computation (GECCO '16), pages 1359-1365, Denver, Colorado, U.S.A., July 20-24, 2016.
Jason H. Moore, Steven F. Jennings, Casey S. Greene, Lawrence E. Hunter, Andy D. Perkins, Clarlynda Williams-Devane, Donald C. Wunsch, Zhongming Zhao, and Xiuzhen Huang, “No-Boundary Thinking in Bioinformatics,” Pacific Symposium on Biocomputing, Hawaii, Vol. 22, p. 646, 2016.
J. Matta, T. Obafemi-Ajayi, J. Borwey, D. Wunsch, G. Ercal, “Robust Graph theoretic Clustering Approaches Using Node-Based Resilience Measures”, IEEE International Conference on Data Mining, Dec 2016, pp. 320-329.
N. Melton and D. C. Wunsch, “Enhancing Supervisory Training Signals with Environmental Reinforcement Learning Using Adaptive Dynamic Programming and Artificial Neural Networks,” Proceedings of the 15th IEEE International Conference on Cognitive Informative and Cognitive Computing, pp 331-335, 2016.
Khalid Al-Jabery, Tayo Obafemi-Ajayi, Gayla Olbricht, T. Nicole Takahashi, Stephen Kanne, Donald Wunsch, “Ensemble Statistical and Subspace Clustering Model for Analysis of Autism Spectrum Disorder Phenotypes,” IEEE Engineering in Medicine and Biology Conference, Orlando, FL, 2016.
Seaar Al-Dabooni and Donald Wunsch, “Heuristic Dynamic Programming for Mobile Robot Path Planning Based on Dyna Approach,” IEEE International Joint Conference on Neural Networks, Vancouver, Canada, July 2016.
Leonardo Enzo Brito da Silva and Donald C. Wunsch, “An Information Theoretic ART for Robust Unsupervised Learning,” IEEE International Joint Conference on Neural Networks, Vancouver, Canada, July 2016.
Islam Elnabarawy, Donald Wunsch and Ashraf Abdelbar, “Biclustering ARTMAP Collaborative Filtering Recommender System,” IEEE International Joint Conference on Neural Networks, Vancouver, Canada, July 2016.
W Kayani, SP Acharya, IG Guardiola, DC Wunsch, B Schumacher, “A Hybrid of Computational Intelligence Techniques for Shape Analysis of Traffic Flow Curves,” Transportation Research Board 94th Annual Meeting, 2015. *
S. Li, X. Fu, I. Jaithwa, E. Alonso, M. Fairbank and D. C. Wunsch, "Control of three phase grid-connected microgrids using artificial neural networks," 7th International Joint Conference on Computational Intelligence (IJCCI), Lisbon, Portugal, 2015, pp. 58-69. *
J. Maser, J. Rovey, X. Yang, “Fabrication of Asymmetric Nanostructures for Plasmonic Force Propulsion,” 54th AIAA Aerospace Sciences Meeting, AIAA Science and Technology Forum and Exposition 2016, SATS-01, San Diego, CA, January 4-8, 2016.
Hang Su, Jun Zhu, Zhaozheng Yin, Yinpeng Dong, and Bo Zhang, “Efficient and Robust Semi-supervised Learning over a Sparse-Regularized Graph,” the 14th European Conference on Computer Vision (ECCV), 2016.
Yunxiang Mao and Zhaozheng Yin, “A Hierarchical Convolutional Neural Network for Mitosis Detection in Phase-Contrast Microscopy Images,” the 19th International Conference on Medical Image Computing and Computer Assisted Intervention (MICCAI), 2016.
Mingzhong Li and Zhaozheng Yin, “Cell Segmentation using Stable Extremal Regions in Multi-exposure Microscopy Images,” IEEE International Symposium on Biomedical Imaging (ISBI), 2016.
Yunxiang Mao, Zhaozheng Yin, and Joseph M. Schober, “A Deep Convolutional Neural Network Trained on Representative Samples for Circulating Tumor Cell Detection,” IEEE Winter Conference on Applications of Computer Vision (WACV), 2016.
Shu Yang, Yao-Jan Wu, Zhaozheng Yin, and Yiheng Feng, “Estimating Freeway Travel Times Using General Motors Model,” The Transportation Research Board (TRB) 95th Annual Meeting, 2016.
S. Ebrahimi-Asl, M. T. A. Ghasr and M. Zawodniok, "Application of low scattering antennas to RFID networks," 2016 IEEE International Conference on RFID (RFID), Orlando, FL, 2016, pp. 1-7. doi: 10.1109/RFID.2016.7488008
Non-Refereed Conference Papers
Mortada A. Aman and Egemen K. Çetinkaya, “A Secure Backup System with Encryption Intensity Selection and Deduplication,” The Network Innovators Community Event (GENI NICE) Poster Session, Irvine, CA, December 2016. 10th Central Area Networking and Security Workshop (CANSec) Poster Session, St. Louis, MO, October 2016.
“A Model for the Logical Interdependence (Financial) within Transportation Infrastructure in the Aftermath of a Large-Scale Disaster,” ISERC, Anaheim, California, May, 2016.
J. Luo, T. Bender, D.A. Bristow, R.G. Landers, J.T. Goldstein, A.M. Urbas, E.C. Kinzel, “Bubble Formation in Additive Manufacturing of Borosilicate Glass,” Solid Freeform Fabrication Symposium, Austin TX August (2016).
J.D. Pribe, S.C. Thandu, Z. Yin, E.C. Kinzel, “Toward DMD illuminated spatial-temporal modulated thermography,” SPIE DCS, Baltimore MD April (2016).
T. Liu, C. Qu, M. Almasri, E.C. Kinzel, “Design and Analysis of Frequency-Selective Surface Enabled Microbolometers,” SPIE DCS, Baltimore MD April (2016)
J. Luo, L.J. Gilbert, D.C. Peters, D.A. Bristow, R.G. Landers, J.T. Goldstein, A.M. Urbas, E.C. Kinzel, “Bubble formation in additive manufacturing of glass,” SPIE DCS, Baltimore MD April (2016)
J. Luo, L.J. Gilbert, D.A. Bristow, R.G. Landers, J.T. Goldstein, A.M. Urbas, E.C. Kinzel, “Additive manufacturing of glass for optical applications,” SPIE Photonics West, San Francisco, Feb. (2016) (Best Paper Award).
C. Qu, E.C. Kinzel, “Low-Cost, Large-Area Patterning of Metasurfaces with Off-Axis Microsphere Photolithography,” Materials Research Society Fall Meeting, Boston, MA (2016).
C. Qu, E.C. Kinzel, “Infrared Metasurfaces Fabricated with Microsphere Photolithography,” Materials Research Society Spring Meeting, Phoenix, AZ (2016).
Gegel, M.L., Bristow, D.A., Landers, R.G., and Nisbett, A., 2016, “Laser Line Scan Characterization of Geometric Profiles in Laser Metal Deposition,” Twenty Seventh Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 8–10, pp. 1103–1111.
Kinzel, E.C., Lou, J., Gilbert, L., Peters, D., Landers, R.G., Bristow, D.A., Goldstein, J., and Urbas, A., 2016, “Bubble Formation in the Additive Manufacturing of Glass,” Twenty Seventh Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 8–10, pp. 998–1003.
John R. Woodward and Daniel R. Tauritz. Hyper-Heuristics. In Proceedings of of the 18th Annual Conference Companion on Genetic and Evolutionary Computation (GECCO '16), pages 273-304, Denver, Colorado, U.S.A., July 20-24, 2016.
Shen, Y. and Tsai, H. L., "Manufacturing of 3D, Large, Complex Geometry of Metallic Glass Structures," 2016 Defense Innovation Summit, Austin, TX, November 29 - December 1, 2016.
2015
Refereed Conference Papers
Lou, J., Gilbert, L., Qu, C., Wilson, J., Kinzel, E., Bristow, D. A. and Landers, R. G., "Wire-Fed Additive Manufacturing of Transparent Glass Parts," Proceedings of the 10th Manufacturing Science and Engineering Conference (MSEC2015), Paper No. MSEC2015-9377, Charlotte, NC, June 8 - 12, 2015.
Luo, J., Gilbert, L. J., Qu, C., Morrow, B., Bristow, D. A., Landers, R. G., Goldstein, J., Urbas, A. and Kinzel, E. C., "Solid Freeform Fabrication of Transparent Fused Quartz Using a Filament Fed Process," Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 122 - 133, Austin, TX, August 10 - 12, 2015.
Sammons, P. M., Bristow, D. A. and Landers, R. G., "DC-Gain Layer-to-Layer Stability Criterion in Laser Metal Deposition Processes," Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 1345 - 1355, Austin, TX, August 10 - 12, 2015.
Sammons, P. M., Bristow, D. A. and Landers, R. G., "A Model Predictive Repetitive Process Control Formulation for Additive Manufacturing Processes," Dynamic Systems and Control Conference, Paper No. DSCC2015-9780, Columbus, OH, October 28 – 30, 2015.
Rajgopal Yarlagadda, Srinath Pinnaka, and Egemen K. Çetinkaya, “A Time-Evolving Weighted-Graph Analysis of Global Petroleum Exchange”, in Proceedings of the 3rd International Workshop on Understanding the inter-play between Sustainability, Resilience, and Robustness in networks (USRR), Munich, October 2015, pp. 266 – 273.
Srinath Pinnaka, Rajgopal Yarlagadda, and Egemen K. Çetinkaya, “Modelling Robustness of Critical Infrastructure Networks”, in Proceedings of the 11th IEEE/IFIP International Conference on the Design of Reliable Communication Networks (DRCN), Kansas City, MO, March 2015, pp. 95 – 98.
Tuwair, H., Volz, J., ElGawady, M., Mohamed, M., Chandrashekhara, K. and Birman, V., "Performance of GFRP Bridge Deck Panels with Corrugated Web Layers Filled with PU Foam," Transportation Research Board, Paper No. 15-5403,pp. 1 - 13, Washington, DC, January 11 - 15, 2015.
Wang, X., Chandrashekhara, K., Rummel, S. A., Lekakh, S., Van Aken, D. C. and O’Malley, J., "Modeling and Simulation of Hot Rolling Using Nonlinear Material Models," International Conference on Advances in Product Metallurgy of Long and Forged Products, Paper No. 53, Vail, CO, July 12 - 15, 2015.
Rummel, S. A., Van Aken, D. C., O’Malley, Lekakh, S., Wang, X. and Chandrashekhara, K., "High Strain Rate Hot Deformation of Steels: Measurement and Simulation," International Conference on Advances in Product Metallurgy of Long and Forged Products, Paper No. 54, Vail, CO, July 12 - 15, 2015.
Abutunis, A., Taylor, G., Fal, M., Nicholas, J. and Chandrashekhara, K., "Performance Evaluation of Coaxial Horizontal Axis Hydrokinetic Composite Turbine System," Composites and Advanced Materials Expo (CAMX) Conference, Paper No. 0341, Dallas, TX, October 26 - 29, 2015.
Anandan, S., Dhaliwal, G. S., Chandrashekhara, K., Berkel, T. R. and Pfitzinger, D., "Processing and Performance of Out-of-Autoclave Bismaleimide Composite Sandwich Structures," Composites and Advanced Materials Expo (CAMX) Conference, Paper No. 0342, Dallas, TX, October 26 - 29, 2015.
Meinders, R., Nicholas, J. and Chandrashekhara, K., "Hybrid Manufacturing Process of SiC/SiC Composite Using Preceramic Polymer," Composites and Advanced Materials Expo (CAMX) Conference, Paper No. 0343, Dallas, TX, October 26 - 29, 2015.
Taylor, G., Wang, X., Motaparti, K. P., Meng, S., Leu, M. C. and Chandrashekhara, K., "Modeling and Characterization of Fused Deposition Modeling Tooling for Autoclave Process," Composites and Advanced Materials Expo (CAMX)Conference, Paper No. 0344, Dallas, TX, October 26 - 29, 2015.
Mohamed, M., Dhaliwal, G. S., Huo, Z. and Chandrashekhara, K., "Evaluation of Low Velocity Impact Properties of Stitched Foam-Core Polyurethane Sandwich Structural Panel," Composites and Advanced Materials Expo (CAMX) Conference, Paper No. 0345, Dallas, TX, October 26 - 29, 2015.
Hussein, R. M., Anandan, S. and Chandrashekhara, K., "Thermo-oxidation Induced Stresses in Bismaleimide Composites: Experiment and Simulation," Composites and Advanced Materials Expo (CAMX) Conference, Paper No.0346, Dallas, TX, October 26 - 29, 2015.
A. Nazi, M. Raj, M. Di Francesco, P. Ghosh, and S. K. Das, “Exploiting Gene Regulatory Networks for Robust Wireless Sensor Networking,” Proceedings of IEEE Global Communications Conference (GlobeCom): Selected Areas in Communications: Molecular, Biological and Multi-Scale Communications, San Diego, CA, Dec 2015.
S. Roy, V. Shah, and S. K. Das, “Characterization of E. Coli Gene Regulatory Network and its Topological Enhancement by Edge Rewiring,” Proceedings of 9th International Conference on Bio-inspired Information and Communications Technologies (BICT), New York City, Dec 2015.
Y. Rahulamathavan, M. Rajarajan, O. F. Rana, M. S. Awan, P. Burnap, and S. K. Das, “Assessing Data Breach Risk in Cloud Systems,” Proceedings of 7th IEEE International Conference on Cloud Computing Technology and Science, (CloudCom) Vancouver, Canada, pp. 363-370, Nov 2015.
S. Das and S. K. Das, “Leveraging Network Structure in Centrality Evaluation of Large Scale Networks,” Proceedings of 40th Annual IEEE Conference on Local Computer Networks (LCN), Clearwater Beach, FL, pp. 579-586, Oct 2015.
M. Shariar, S. K. Das, and Y. Liu, “HiPCV: A History Based Learning Model for Predicting Contact Volume in Opportunistic Networks,” Proceedings of 16th IEEE International Symposium on a World of Wireless, Mobile and Multimedia Networks (WoWMoM), Boston, June 2015.
F. Restuccia and S. K. Das, “Lifetime Optimization with QoS of Sensor Networks with Uncontrollable Mobile Sinks,” Proceedings of 16th IEEE International Symposium on a World of Wireless, Mobile and Multimedia Networks (WoWMoM), Boston, June 2015.
- Cheng, L. Kong, C. Luo, J. Nu, Y. Gu, W. He, and S. K. Das, “False Data Detection and Correction Framework for Participatory Sensing,” Proceedings of IEEE/ACM International Symposium on Quality of Service (IWQoS), Portland, USA, June 2015.
- Mukherjee, P. Shamsi, M. Ferdowsi, "Impedance shaping for improved load sharing among inverters in AC microgrids," in Energy Conversion Congress and Exposition (ECCE), 2015 IEEE , pp.738-744, 20-24 Sept. 2015
P. Vepakommaz, D. De, S. K. Das, and S. Bhansal, “A-Wristocracy: Deep Learning on Wrist-worn Sensing for Recognition of User Complex Activities,” Proc. of 12th IEEE Annual Body Sensor Networks Conference (BSN), MIT, Cambridge, MA, pp. 1-6, June 2015.
D. De and S. K. Das, “SREE-Tree: Self-Reorganizing Energy-Efficient Tree Topology Management in Sensor Networks,” Proceedings of 4th IFIP Conference on Sustainable Internet and ICT for Sustainability, pp. 1-8, Apr 2015.
A. Rodrigues-Carrion, C. Garcia-Rubio, C. Campo, and S. K. Das, “Analysis of a Fast LZ-based Entropy Estimator for Mobility Data,” Proceedings of 4th IEEE Workshop on Impact of Human Mobility in Pervasive Systems and Applications (PerMoby), St Louis, pp. 451-456, Mar 2015.
F. Restuccia, A. Saracino, S. K. Das, and F. Martinelli, “Preserving QoI in Participatory Sensing by Tackling Location-Spoofing through Mobile WiFi Hotspots,” Proceedings of 7th IEEE PerCom Workshop on Information Quality and Quality of Service for Pervasive Computing (IQ2S), St Louis, Missouri, pp. 81-86, Mar 2015.
Z. Naor, S. K. Das, and M. Raj, “Content Placement for Video Streaming over Cellular Networks,” Proceedings of International Conference on Computing, Networking and Communications (ICNC), pp. 133-137, Feb 2015.
N. Ghosh, I. Chokshi, M. Sarkar, S. K. Ghosh, A. K Kaushik, and S. K. Das, “NetSecuritas: An Integrated Attack Graph-based Security Assessment Tool for Enterprise Networks,” Proceedings of 16th International Conference on Distributed Computing and Networking (ICDCN 2015), Goa, India, pp. 1-10, Jan 2015.
Du, X., "Development of Engineering Uncertainty Repository,” ASME 2015 International Mechanical Engineering Congress & Exposition, IDETC/CIE 2015, Paper No. DETC2015-46172, Boston, MA, August 2 - 5, 2015.
*Du, X. and Zhu, Z., "Extreme Value Metamodeling for System Reliability with Time-Dependent Functions," ASME 2015International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, Paper No. DETC2015-46162, Boston, MA, August 2 - 5, 2015.
*Du, X. and Zhu, Z., "Uncertainty Quantification in Time-Dependent Reliability Analysis," ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, Paper No. DETC2015-46168, Boston, MA, August 2 - 5, 2015.
*Du, X., Zhu, Z. and Hu, Z., "Reliability Analysis for Multidisciplinary Systems Involving Stationary Stochastic Processes," ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, Paper No. DETC2015-46168, Boston, MA, August 2 - 5, 2015.
*Zhu, Z., Hu, Z. and Du, X., "Extreme Value Metamodeling for System Reliability with Time-Dependent Functions," ASME 2015 International Design and Engineering Technical Conferences & Computers and Information in Engineering Conference, Paper No. IMECE2015-53441, Houston, TX, November 13 – 19, 2015.
*Cheng, Y. and Du, X., "System Reliability Analysis with Dependent Component Failures during Early Design Stage," ASME 2015 International Design and Engineering Technical Conferences & Computers and Information in Engineering Conference, Paper No. IMECE2015-50269, Houston, TX, November 13 – 19, 2015.
Takai, S. and Du, X., "Evaluations of Engineering Uncertainty," ASME 2015 International Mechanical Engineering Congress & Exposition, Paper No. IMECE2015-53555, Houston, TX, November 13 – 19, 2015.
Mehdiyev, N., J. Krumeich, D. Enke, D. Werth, and P. Loos, “Determination of Rule Patterns in Complex Event Processing Using Machine Learning Techniques,” Procedia Computer Science, Vol. 61 (2015): 395-401.
Wiles, P.S., and D. Enke, “Optimizing MACD Parameters via Genetic Algorithms for Soybean Futures,” Procedia Computer Science, Vol. 61 (2015): 85-91.
Almasi Monfared, S., and D. Enke, “Noise Canceling in Volatility Forecasting Using an Adaptive Neural Network Filter,” Procedia Computer Science, Vol. 61 (2015): 80-84.
Wiles, P.S., and D. Enke, “A Hybrid Neuro-Fuzzy Model to Forecast the Soybean Complex,” Proceedings of the 2015 American Society of Engineering Management conference, Indianapolis, IN, October 2015.
Agarwal, S., L. Pape, C. Dagli, N. Ergin, D. Enke, A. Gosavi, R. Qin, D. Konur, R. Wang, and S. Gottapu, “Flexible and Intelligent Learning Architectures for SoS (FILA-SoS): Architectural Evolution in Systems-of-Systems”, 2015 Conference on Systems Engineering Research, Procedia Computer Science, Vol. 44 (2015): 76-85.
J. Huang, L. Hua, L. Yuan, “Optical fiber based microwave-photonic interferometric sensors,” SPIE Proceedings, Photonics West, 13-18 Feb. 2016, San Francisco, California, USA.
L. Yuan, B. Cheng, J. Liu, J. Huang, H. Xiao “All optical fiber polarization controlling devices fabricated by femtosecond laser irradiation,” SPIE Proceedings, Photonics West, 13-18 Feb. 2016, San Francisco, California, USA.
Huchun, Kui Ren and Wei Jiang, “Outsourceable Privacy-Preserving Power Usage Control in a Smart Grid", 29th Annual IFIP WG 11.3 Working Conference on Data and Applications Security and Privacy, Fairfax, VA, July 13 - 15, 2015.
J. Luo, L.J. Gilbert, C. Qu, B. Morrow, D.A. Bristow, R.G. Landers, J. Goldstein, A. Urbas, E.C. Kinzel, “Solid Freeform Fabrication of Transparent Fused Quartz Using a Filament Fed Process”, Solid Freeform Fabrication, Austin Texas (2015).
J. Luo, L.J. Gilbert, J. Wilson, D. Bristow, E. Kinzel, “Wire-fed additive manufacturing of transparent glass parts”, ASME Int. Manuf. Sci. Eng. Conf., Charlotte, NC (2015).
Lotfi, N., Zomorodi Moghadam, H., and Landers, R.G., 2015, “Thermal Management and Voltage Stabilization in Air–Forced Open–Cathode Fuel Cells,” Dynamic Systems and Control Conference, Columbus, Ohio, October 28–30.
Lotfi, N., Landers, R.G., Li, J., and Park, J., 2015, “Electrochemical Model–Based Adaptive Estimation of Li–Ion Battery State of Charge,” Dynamic Systems and Control Conference, Columbus, Ohio, October 28– 30.
Sammons, P.M., Bristow, D.A., and Landers, R.G., 2015, “A Model Predictive Repetitive Process Control Formulation for Additive Manufacturing Processes,” Dynamic Systems and Control Conference, Columbus, Ohio, October 28–30.
Sammons, P.M., Bristow, D.A., and Landers, R.G., 2015, “DC–Gain Layer–to–Layer Stability Criterion in Laser Metal Deposition Processes,” Twenty Sixth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 10–12, pp. 1345–1355.
Luo, J., Gilbert, L.J., Qu, C., Morrow, B., Bristow, D.A., Landers, R.G., Goldstein, J., Urbas, A., and Kinzel, E.C., 2015, “Solid Freeform Fabrication of Transparent Quartz Glass using a Filament Fed Process,” Twenty Sixth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 10–12, pp. 122–133.
Ghazanfari, A., Li, W., Leu, M.C., and Landers, R.G., 2015, “Planning Freeform Extrusion Fabrication Processes with Consideration of Horizontal Staircase Effect,” Twenty Sixth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 10–12, pp. 1313–1323.
Ghazanfari, A., Li, W., Leu, M.C., and Landers, R.G., 2015, “Optimal Rastering Orientation in Freeform Extrusion Fabrication Processes,” Twenty Sixth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 10–12, pp. 1324–1333.
Li, W., Ghazanfari, A., Li, Mingyang, Leu, M., and Landers, R.G., 2015, “Method of Extrusion on Demand for High Solids Loading Alumina Paste in Freeze–form Extrusion Fabrication,” Twenty Sixth Annual Solid Freeform Fabrication Symposium, Austin, Texas, August 10–12, pp. 332–345.
Lou, J., Gilbert, L., Qu, C., Wilson, J.S., Kinzel, E., Bristow, D.A., and Landers, R.G., 2015, “Wire Fed Additive Manufacturing of Transparent Glass Parts,” International Manufacturing Science and Engineering Conference, Charlotte, North Carolina, June 8–12.
“American Sign Language Alphabet Recognition Using Microsoft KINECT,” C. Dong, M. C. Leu, and Z. Yin, Proceedings of IEEE Computer Society Workshop on Observing and Understanding Hands in Action (HANDS 2015), Boston, MA, June 12, 2015; this paper received the best paper award at the HANDS 2015 workshop.
“Personal Preference and Trade-off based Additive Manufacturing Web Service Selection,” V. P. Modekurthy, K. K. Fletcher, X. F. Liu, and M. C. Leu, Proceedings of the 22nd IEEE International Conference on Web Services, New York, NY, June 27 - July 2, 2015.
“Comparisons of Performances and Liquid Water Distributions within Bio-Inspired And Single Serpentine Pen Fuel Cell Channels,” B. P. Saripella, M. C. Leu, and U. O. Koylu, Proceedings of ASME Fuel Cell Science, Engineering, and Technology Conference, June 28-July 2, 2015, San Diego, CA.
“Freeform Extrusion Fabrication of Titanium Fiber Reinforced Bioactive Glass Scaffolds,” A. Thomas, K. C.R. Kolan, M. C. Leu and G. E. Hilmas, Proceedings of Solid Freeform Fabrication Symposium, Austin, TX, August 10-12, 2015.
“Methods of Extrusion on Demand for High Solids Loading Alumina Paste in Freeze-form Extrusion Fabrication,” W. Li, A. Ghazanfari, M. C. Leu, and R. G. Landers, Proceedings of Solid Freeform Fabrication Symposium, Austin, TX, August 10-12, 2015.
“Planning Freeform Extrusion Fabrication Processes with Consideration of Horizontal Staircase Effect,” A. Ghazanfari, W. Li, M. C. Leu, and R. G. Landers,, Proceedings of Solid Freeform Fabrication Symposium, Austin, TX, August 10-12, 2015.
“Optimal Rastering Orientation in Freeform Extrusion Fabrication Processes,” A. Ghazanfari, W. Li, M. C. Leu, and R. G. Landers, Proceedings of Solid Freeform Fabrication Symposium, Austin, TX, August 10-12, 2015.
“Effects of Temperature on Aqueous Freeform Extrusion Fabrication,” J. Li, M. C. Leu, and G. E. Hilmas, Proceedings of Solid Freeform Fabrication Symposium, Austin, TX, August 10-12, 2015.
“A Driving Simulator Study to Evaluate the Impact of Portable Changeable Message Signs on Drivers' Speed Characteristics,” G. H. Bham, M. C. Leu and B. Venkat, Proceedings of Road Safety & Simulation International Conference, Orlando, FL, October 6-8, 2015.
“Modeling and Characterization of Fused Deposition Modeling Tooling for Autoclave Process,” G. Taylor, X. Wang, K. P. Motaparti, S. Meng, M. C. Leu and K. Chandrashekhara, Proceedings of Composites and Advanced Materials Expo (CAMX 2015), Dallas, TX, October 26-29, 2015.
Lasanthi Heendaliya, Michael Wisely, Dan Lin, Sahra Sedigh, and Ali Hurson, “Influence-aware Predictive Density Queries Under Road-network Constraints”, 14th International Symposium on Spatial and Temporal Databases (SSTD), 2015.
Jingwei Li, Anna Squicciarini, Dan Lin, Shuang Liang, and Chunfu Jia, “SecLoc: Securing Location-Sensitive Storage in the Cloud”, 20th ACM symposium on access control models and technologies (SACMAT), 2015.
2015 International Conference on Powder Metallurgy & Particulate Materials (POWDERMET 2015), San Diego, CA, May 17 - 20, 2015.
Liu, H., Sparks, T. and Liou, F., "Residual Stress and Deformation Modeling for Metal Additive Manufacturing Processes," Proceedings of the 4th International Conference on Mechanics and Industrial Engineering, Paper No. 245, Barcelona, Spain, July 20 - 21, 2015.
Isanaka, S. P., Liou, F. and Newkirk, J., "Non-Prismatic Air-Breathing Fuel Cells - Concept, Design and Manufacturing," Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, Paper No. ASME DETC2015-46493, Boston, MA, August 2 - 5, 2015.
Wang, Z., Liu, R., Sparks, T. and Liou, F., "A Framework for Large Scale Fused Pellet Modeling (FPM) by an Industry Robot," Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 411 - 421, Austin, TX, August 10 - 12, 2015.
Gaja, H. and Liou, F., "Depth of Cut Monitoring for Hybrid Manufacturing Using Acoustic Emission Sensor," Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 422 - 436, Austin, TX, August 10 - 12, 2015.
Bitragunta, V. S., Sparks, T. and Liou, F., "Performance Metric for Powder Feeder Systems in Additive Manufacturing," Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 473 - 491, Austin, TX, August 10 - 12, 2015.
Zhang, J., Zhang, Y., Liou, F., Newkirk, J., Taminger, K. M. B. and Seufzer, W. J., "A Microstructure and Hardness Study of Functionally Graded Materials Ti6Al4V/TiC by Laser Metal Deposition," Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 664 - 673, Austin, TX, August 10 - 12, 2015.
Zhang, Y., Zhang, J., Liou, F. and Newkirk, J., "Microstructure and Property of TiB-Reinforced Ti Alloy Composites by Laser Metal Deposition," Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 683 - 690, Austin, TX, August 10 - 12, 2015.
Yan, L., Chen, X., Li, W., Liou, F. and Newkirk, J., "Direct Laser Deposition of Ti-6Al-4V from Elemental Powder Blends," Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 691 - 699, Austin, TX, August 10 - 12, 2015.
Karnati, S., Sparks, T., Liou, F., Newkirk, J. W., Taminger, K. M. B. and Seufzer, W. J., "Laser Metal Deposition of Functionally Gradient Materials from Elemental Copper and Nickel Powders," Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 789 - 802, Austin, TX, August 10 - 12, 2015.
Flood, A. and Liou, F., "Modeling of Powder Bed Processing – A Review," Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 1118 - 1128, Austin, TX, August 10 - 12, 2015.
Kumar, K. S., Sparks, T. and Liou, F., "Parameter Determination and Experimental Validation of a Wire Feed Additive Manufacturing Model," Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 1129 - 1153, Austin, TX, August 10 - 12, 2015.
Moradpour, Samareh1, Wu, Shuang1, Long, Suzanna2, Leu, Ming C., Konur, Dincer, and Qin, Ruwen, “Use of Traffic Simulators to Determine Driver Response to Work Zone Configurations,” Proceedings of the American Society for Engineering Management 2015 International Annual Conference S. Long, E-H. Ng, and A. Squires eds., Indianapolis, IN, October 2015.
Perez-Lespier, Lizzette1 and Long, Suzanna2 “A Model for the Evaluation of Environmental Impact Indicators for a Sustainable Maritime Transportation System,” Proceedings of the American Society for Engineering Management 2015 International Annual Conference S. Long, E-H. Ng, and A. Squires eds., Indianapolis, IN, October 2015. Abstract Only.
Brennan, Cory1 and Long, Suzanna2, “Economic Analysis of Residential Energy Storage for Time of Use Rate Cases,” Proceedings of the 2015 Industrial and Systems Engineering Research Conference, S. Cetinkaya and J. K. Ryan, eds., Nashville, TN, USA, May 2015.
Perez-Lespier, Lizzette1 and Long, Suzanna2, “A Systems Thinking Approach to Post-Disaster Restoration of Maritime Transportation Systems,” Proceedings of the 2015 Industrial and Systems Engineering Research Conference, S. Cetinkaya and J. K. Ryan, eds., Nashville, TN, USA, May 2015.
Farhangi, Hadi1,2, Konur, Dincer, Long, Suzanna, Qin, Ruwen, and Harper, Jennifer, “A Bi-objective Railroad Tracks Inspection Planning Problem,” Proceedings of the 2015 Industrial and Systems Engineering Research Conference, Nashville, TN, USA, May 2015.
Doug McGeehan, Dan Lin and Sanjay Madria, ChitChat: An Effective Message Delivery Method in Sparse Pocket-Switched Networks, to appear in 36th IEEE International Conference on Distributed Computing Systems (ICDCS 2016), Nara, Japan.
Kiran Kumar Puram and Sanjay Madria, Top-K with Diversity-M Data Retrieval in Wireless Sensor Networks, to appear in 17th IEEE International Conference on Mobile Data Management, 2016.
San Yeung and Sanjay Madria, A Flexible Real-Time Ridesharing System Considering Current Road Conditions, to appear in the proceedings of 17th IEEE International Conference on Mobile Data Management, 2016
San Yeung, Sanjay Madria, Mark Linderman, James Milligan, Routing and Scheduling of Spatio-Temporal Tasks for Optimizing Airborne Sensor System Utilization, to appear in the proceedings of 10th ACM International Conference on Distributed and Event-based Systems, Irvine, California, USA.
Amarender Reddy, Sanjay Madria, and Mark Linderman, Aerial Vehicle Trajectory Design for Spatio-Temporal Task Aggregation, to appear in the proceedings of IEEE International Conference on Unmanned Aircraft Systems (ICUAS'16), Arlington, Virginia, June 2016.
Sanjay Madria, Amartya Sen, Rashmi Dalvi, A Sensor Cloud Test-bed for Multi-Model and Multi-User Sensor Applications, in the proceedings of IEEE WCNC, 2016.
Vimal Kumar and Sanjay Madria, Distributed Attribute Based Access Control of Aggregated Data in Sensor Clouds, in IEEE proceedings of 34th Symposium on Reliable Distributed Systems (SRDS 2015) Montreal, Canada. IEEE Best Paper Award.
Rashmi Dalvi and Sanjay Madria, Energy Efficient Scheduling of Fine-granularity Tasks in a Sensor Cloud, in proceedings of 20th International Conference on Database Systems for Advanced Applications, Hanoi, Vietnam, April, 2015.
Amarender Mekala, Sanjay Madria and Mark Linderman, Aerial Vehicle Trajectory Design for Task Aggregation, in proceedings of IEEE International Mobile Data Management (MDM), Demo Paper, USA, 2015.
John Tegtmeyer and Sanjay Madria, Location and Time Optimized Common Meeting Points for Traveling Clients, in proceedings of IEEE International Mobile Data Management (MDM), Demo Paper, USA, 2015.
San Yeung, Sanjay Madria and Mark Linderman, A Trajectory Recommendation System via Optimizing Sensors Utilization in Airborne Systems, in 14th International Symposium on Spatial and Temporal Databases (SSTD, 2015).
Patil, Sandeep; Zhabelova, Gulnara; Vyatkin, Valeriy; McMillin, Bruce, "Towards formal verification of smart grid distributed intelligence: FREEDM case," in Industrial Electronics Society, IECON 2015 - 41st Annual Conference of the IEEE , vol., no., pp.003974-003979, 9-12 Nov. 2015, 10.1109/IECON.2015.7392719
Li Feng; McMillin, B., "Information Flow Quantification Framework for Cyber Physical System with Constrained Resources," in Computer Software and Applications Conference (COMPSAC), 2015 IEEE 39th Annual , vol.2, no., pp.50-59, 1-5 July 2015,
10.1109/COMPSAC.2015.92
Li Feng, Bruce McMillin, Anthony Perez Santiago, and Ziang Zhang, “Incremental Cost Consensus(ICC) and Leaderless ICC Implementations in FREEDM,” Sixth Conference on Innovative Smart Grid Technologies (ISGT2015), February 17-20, 2015.
Schmidt, S.M., S. Long, V.S. Kothapallib, R. Qin. Comparison of statistical analysis methodologies for LED indication replacement schedules. In Proceeding of 2014 Industrial and Systems Engineering Research Conference (ISERC). Montreal, Canada. 2014.
Moradpour, S., S. Wu, S. Long, M.C. Leu, D. Konur, and R. Qin. Use of Traffic Simulators to Determine Driver Response to Work Zone Configurations. In Proceedings of the American Society for Engineering Management (ASEM) 2015 International Annual Conference. Indianapolis, Indiana, October 2015.
Farhangi, H., D. Konur, S. Long, R. Qin, J. Harper. A Bi-objective Railroad Inspection Planning Problem. In Proceeding of The 2015 Industrial and Systems Engineering Research Conference (ISERC). Nashville, Tennessee, 2015.
Vignesh Narayanan and S. Jagannathan, “'Distributed adaptive optimal regulation of uncertain large-scale linear networked control systems using Q-learning”, Proc. of the IEEE Symposium on Adaptive Dynamic Programming and Reinforcement Learning, pp. 587-592, December 2015.
Haifeng Niu and S. Jagannathan, “Optimal defense and control for cyber-physical systems”, Proc. of the Symposium Series on Computational Intelligence, pp. 634-639, December 2015.
Krishnan Raghavan and S. Jagannathan, “Hierarchical Mahalanobis distance clustering based technique for prognostics in applications generating Bigdata”, Proc. of the Symposium Series on Computational Intelligence, pp. 516-521, December 2015.
Jia Cai, Hasan Ferdowsi, and S. Jagannathan, “Model-based actuator fault accommodation for distributed parameter systems represented by coupled linear PDEs”, Proc. of the IEEE Multi-Conference on Systems and Control, pp. 978-983, Sept. 2015.
Behzad Talaei, S. Jagannathan, and John Singler, “Boundary control of linear one-dimensional parabolic PDE using neuro-dynamic programming”, Proc. of the IEEE Multi-Conference on Systems and Control, pp. 577-582,Sept. 2015.
Behzad Talaei, S. Jagannathan, and John Singler, “Adaptive dynamic programming boundary control of uncertain coupled semi-linear parabolic PDE”, Proc. of the IEEE Multi-Conference on Systems and Control, pp. 918-923,Sept. 2015.
A. Sahoo, Hao Xu, and S. Jagannathan, “Event-based neural network approximation and control of uncertain nonlinear continuous-time systems”, Proc. of the American Controls Conference, pp. 1567-1572, July 2015.
H. Guzey, T. Dierks and S. Jagannathan, “Hybrid consensus-based formation control of agents with second order dynamics”, Proc. of the American Controls Conference, pp. 4386-4391, July 2015.
Jose Santiago Elvira Ceja, Edgar N. Sanchez, and S. Jagannathan, “Stochastic inverse optimal control of unknown linear networked control system in the presence of random delays and packet losses”, Proc. of the American Controls Conference, pp. 799-804, July 2015.
V. Narayanan, A. Sahoo and S. Jagannathan, “Optimal regulation of uncertain linear discrete-time systems using event-sampled Q-learning and adaptive dynamic programming”, Proc. of the Yale Workshop on Adaptive and Learning Systems, pp. 90-94, June 2015.
J. Joo, S. Raghavan, P. Shamsi, "Aggregating levelized cost functions in microgrids for transmission grid operation," in North American Power Symposium (NAPS), 2015 , pp.1-5, 4-6 Oct. 2015
- Shamsi, M. Marsousi, Xie Huaiqi, W. Fries, C. Shaffer, "Dictionary learning for short-term prediction of solar PV production," in Power & Energy Society General Meeting, 2015 IEEE , pp.1-5, 26-30 July 2015
M. Lin, S. Silvestri, N. Bartolini, T. La Porta, "Energy-Efficient Selective Activation in Femtocell Networks" in Proceedings of the IEEE International Conference on Mobile Ad-hoc and Sensor Systems (MASS), 2015 Acceptance rate 26%
S. Silvestri, B. Holbert, P. Novotny, T. La Porta, A. Wolf and A. Swami, "Inferring Network Topologies in MANETs Applied to Service Redeployment" in Proceedings of the International Conference on Computer Communication and Networks (ICCCN), 2015 Acceptance rate 25%
S. Silvestri, R. Urgaonkar, M. Zafer, B. Ko, "An online method for minimizing network monitoring overhead" in Proceedings of the IEEE International Conference on Distributed Computing Systems (ICDCS), 2015 Acceptance rate 12.8%
B. Holbert, S. Tati, S. Silvestri, T. La Porta, A. Swami, "Network Topology Inference with Partial Path Information" in Proceedings of the IEEE International Conference on Computing, Networking and Communications (ICNC), 2015
J. Y. Joo, S. Raghavan1, and Z. Sun, Integration of sustainable manufacturing systems into smart grids with high penetration of renewable energy resources, in Proceedings of 2016 IEEE Annual Green Technologies Conference, April 6-8, 2016, Kansas City, Missouri, USA.
X. Yao, Z. Sun, D. Wei, and L. Wang, Joint maintenance and energy management in manufacturing systems: prospect discussion, challenge analysis, and a case study in Proceedings of ASME 2016 Manufacturing Science and Engineering Conference (MSEC), June 27-July 1, 2016, Blacksburg, Virginia, USA.
*George Rush, Daniel R. Tauritz, and Alexander D. Kent. Coevolutionary Agent-based Network Defense Lightweight Event System (CANDLES). In Proceedings of the 17th Annual Conference Companion on Genetic and Evolutionary Computation (GECCO '15), pages 859-866, Madrid, Spain, July 11-15, 2015.
Matthew A. Martin and Daniel R. Tauritz. Hyper-Heuristics: A Study On Increasing Primitive-Space. In Proceedings of the 17th Annual Conference Companion on Genetic and Evolutionary Computation (GECCO '15), pages 1051-1058, Madrid, Spain, July 11-15, 2015.
Sean Harris, Travis Bueter, and Daniel R. Tauritz. A Comparison of Genetic Programming Variants for Hyper-Heuristics. In Proceedings of the 17th Annual Conference Companion on Genetic and Evolutionary Computation (GECCO '15), pages 1043-1050, Madrid, Spain, July 11-15, 2015.
Matthew A. Martin, Alex R. Bertels, and Daniel R. Tauritz. Asynchronous Parallel Evolutionary Algorithms: Leveraging Heterogeneous Fitness Evaluation Times for Scalability and Elitist Parsimony Pressure. In Proceedings of the 17th Annual Conference Companion on Genetic and Evolutionary Computation (GECCO '15), pages 1429-1430, Madrid, Spain, July 11-15, 2015.
Tayo Obafemi-Ajayi, Dao Lam, T. Nicole Takahashi, Stephen Kanne, Donald Wunsch, “Sorting the Phenotypic Heterogeneity of Autism Spectrum Disorders: a Hierarchical Clustering Model,” IEEE Conference on Computational Intelligence in Bioinformatics and Computational Biology, August 12-15, 2015, Niagara Falls, Canada.
Clayton Smith and Donald Wunsch, “Time series prediction via two-step clustering,” Proc. IEEE / INNS International Joint Conference on Neural Networks, July 12-16, 2015.
Clayton Smith and Donald Wunsch, “Particle swarm optimization in an adaptive resonance framework,” Proc. IEEE / INNS International Joint Conference on Neural Networks, July 12-16, 2015.
Leonardo Enzo Brito da Silva and Donald Wunsch, “Multi-Prototype Local Density-based Hierarchical Clustering,” Proc. IEEE / INNS International Joint Conference on Neural Networks, July 12-16, 2015.
Shuhui Li, Xingang Fu, Michael Fairbank, Eduardo Alonso, and Donald C. Wunsch, “Neural network-based vector control of VSCHVDC transmission systems,” IEEE International Conference on Renewable Energy Research and Applications, pp. 173-180, 2015.
X. Yang, X. Zhang, “Enhanced optical forces in plasmonic and metamaterial nanostructures,” META’15, the 6th International Conference on Metamaterials, Photonic Crystals and Plasmonics, Session 1A13, New York, NY, August 4-7, 2015. (Invited)
E. Arabi, T. Yucelen, and W. M. Haddad, “Mitigating the effects of sensor uncertainties in networked multiagent systems,” American Conrol Conference, Boston, MA
T. Yucelen, W. M. Haddad, and E. Feron, “Adaptive control architectures for mitigating sensor attacks in cyber-physical systems,” American Control Conference, Boston, MA
J. D. Peterson, T. Yucelen, and E. Pasiliao, “Generalizations on active-passive dynamic consensus filters,” American Control Conference, Boston, MA
D. Tran, T. Yucelen, and E. Pasiliao, “Multiplex information networks for spatially evolving multiagent formations,” American Control Conference, Boston, MA
B. Gruenwald, D. Wagner, T. Yucelen, and J. A. Muse, “Computing actuator bandwidth limits for adaptive control,” AIAA Guidance, Navigation, and Control Conference, San Diego, CA.
A.M.M. Chandran and M. Zawodniok, “Transmitter Leakage Analysis When Operating USRP (N210) in Duplex Mode” to appear in Proc. Of IEEE I2MTC 2015, May 2015.
*X. Yang, Y. R. Zheng, K. Donnell, M.T.A. Ghasr, and R. Zoughi, “Microwave Synthetic Aperture Radar Imaging using sparse measurement,” Int’l Instrum. Measure. Techno. Conf. (I2MTC), Taiwan, May 23-26, 2016. Pp. 1-5.
Z. Chen, Y. R. Zheng, J. Tao, J. Wang, J. Song, “Frequency Domain Turbo Equalization under MMSE Criterion for Single Carrier MIMO Systems,” IEEE Globecom 2015. San Diego, CA, Dec. 9-11, 2015. pp. 1-5.
W. Duan and Y. R. Zheng, “Soft Direct-Adaptive Turbo Equalization for MIMO Underwater Acoustic Communications,” MTS/IEEE OCEANS, Washington D.C., Oct. 19-22, 2015. pp. 1-5.
J. Hao, J. Wang, J. Song and Y. R. Zheng, “MIMO TDS-OFDM for Underwater Acoustic Communication with Turbo Equalization,” MTS/IEEE OCEANS, Washington D.C., Oct. 19-22, 2015. pp. 1-5.
Y.-F. Han, Y. R. Zheng, D.-J. Sun, “Measurement Error Impact on Node Localization of Large Scale Underwater Sensor Networks,” IEEE Veh. Techno. Conf. 2015, Boston, MA, Sep. 6-9, 2015. pp. 1-5.
N. Ahmed, Y. R. Zheng, D. Pommerenke, “Theoretical Modeling of Multi-Coil Channels in Near Field Magneto-Inductive Communication,” IEEE Veh. Techno. Conf. 2015, Boston, MA, Sep. 6-9, 2015. pp. 1-5.
Z. Chen, Y. R. Zheng, J. Wang, and J. Song, “Frequency Domain Turbo Equalization with Iterative Channel Estimation for Single Carrier MIMO Underwater Acoustic Communications,” IEEE Veh. Techno. Conf. 2015, Boston, MA, Sep. 6-9, 2015. pp. 1-5.
W. Zeng, Y. R. Zheng, and R. Schober, “Online Resource Allocation for Energy Harvesting Downlink MIMO Systems with Finite-Alphabet Inputs,” IEEE ICC 2015. London, UK, Jun. 9-13, 2015. pp. 1-6.
X. Yang, Y. R. Zheng, and L. Ma, “Automated Cardiac Self-Gated Radial CMRI,” IEEE Intl. Symp. Medical Measurements Applications (MeMeA). Torino, Italy, May 7-9, 2015. pp. 1-4.
*X. Yang, Y. R. Zheng, M. Yang, and L. Ma, “Compressed Sensing with Non-Uniform Fast Fourier Transform for Radial Ultra-Short Echo Time (UTE) MRI,” IEEE Intl. Symp. Biomedical Imaging (ISBI 2015). Brooklyn, NY, April 16-19, 2015. pp. 1-4.
Non-Refereed Conference Papers
Lou, J., Gilbert, L., Qu, C., Bristow, D. A., Landers, R. G. and Kinzel, E., "Additive Manufacturing of Optical Materials," Society of Photographic Instrumentation Engineers (SPIE) DSS, Baltimore, MD, April 8 – 12, 2015.
Srinath Pinnaka, Rajgopal Yarlagadda, and Egemen K. Çetinkaya, “Evolution of Global Crude Oil Dependence: A Weighted-Directed Graph Analysis,” in Proceedings of the 2nd National Symposium on Resilient Critical Infrastructure, Philadelphia, PA, August 2015. (refereed, available online: https://recias.inl.gov/SitePages/NSRCI%202015.aspx)
Du, X., “Early System Reliability Analysis for New Products Using Standard Components,” 2015 INFORMS Annual Meeting, Philadelphia, PA, November 1-4, 2015.
J. Luo, L.J. Gilbert, C. Qu, B. Morrow, D.A. Bristow, R.G. Landers, J. Goldstein, A. Urbas, E.C. Kinzel, “Solid Freeform Fabrication of Transparent Fused Quartz Using a Filament Fed Process”, Solid Freeform Fabrication, Austin Texas (2015).
J. Luo, L.J. Gilbert, J. Wilson, D. Bristow, E. Kinzel, “Wire-fed additive manufacturing of transparent glass parts”, ASME Int. Manuf. Sci. Eng. Conf., Charlotte, NC (2015).
“Use of Driving Simulators to Compare Work Zone Sign Configurations,” S. Moradpour, S. Wu, S. Long, M. C. Leu, B. Smith, D. Konur, Industrial & Systems Engineering Research Conference (ISERC), Nashville, TN, May 30 – June 2, 2015.
“Design and Optimization of Flow Fields to Improve PEM Fuel Cell Performance,” Q. Wang, M. C. Leu, and U. O. Koylu, Poster Paper, ASME Manufacturing Science and Engineering Conference (MSEC 2015), June 8 - 12, 2015, Charlotte, NC.
“Nature-Inspired Flow Field with a Snowflake Design to Improve PEM Fuel Cell Performance,” Q. Wang, M. C. Leu, and U. O. Koylu, ASME International Mechanical Engineering Congress & Exposition (IMECE 2015), Houston, TX, November 13-19, 2015.
P. Shamsi, “On-line Survival Analysis of Power Electronic Converters Using Step Noise-Cox Processes,” ArXiv preprint, 1507.06000, July 2015
John R. Woodward and Daniel R. Tauritz. Hyper-Heuristics. In Proceedings of of the 17th Annual Conference Companion on Genetic and Evolutionary Computation (GECCO '15), pages 199-230, Madrid, Spain, July 11-15, 2015.
Maciej Zawodniok, “Passive RFID Sensing for Rotor-head Maintenance - WISP platform” presented at the IEEE WiSEE 2015, Orlando, FL, December 14-16, 2015.
2014
Refereed Conference Papers
Al-Ogaidi, A. and Bristow, D.A., “Uniform Ultimate Boundedness of Probe-to-Probe Dynamics in Dual-Probe Atomic Force Microscopy,” ASME Dynamic Systems and Control Conference, pp. V001T12A005, 2014.
Sammons, P.M., Bristow, D.A., and Landers, R.G., “Repetitive Process Control of Laser Metal Deposition,” ASME Dynamic Systems and Control Conference, pp. V002T35A004, 2014.
Creamer, J., Bristow, D.A., Landers, R.G., Freeman, P., and Easley, S., “Population of Compensation Tables for 5-Axis Machine Tools Using Genetic Algorithms,” International Symposium on Flexible Automation, ISFA2014-120L, 2014.
Sammons, P.M., Bristow, D.A., and Landers, R.G., “Frequency Domain Identification of a Repetitive Process Control Oriented Model for Laser Metal Deposition Processes,” International Symposium on Flexible Automation, ISFA2014-119L, 2014.
Sammons, P.M., Ma, L., Embry, K., Armstrong, L., Bristow, D.A., and Landers, R.G., “Modeling and Compensation of Backlash and Harmonic Drive-Induced Errors in Robotic Manipulators,” ASME Manufacturing Science and Engineering Conference, pp. V002T02A048, 2014.
Sammons, P.M., D.A. Bristow, and R.G. Landers, “Control-Oriented Modeling of Laser Metal Deposition as a Repetitive Process,” Proceedings of the American Controls Conference, pp. 1817 – 1820, 2014.
Li, H., Taylor, G., Bheemreddy, V., Iyibilgin, O., Leu, M. and Chandrashekhara, K., "Modeling and Characterization of Fused Deposition Modeling Tooling for Vacuum Assisted Resin Transfer Molding Process," Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE) Conference, Paper No. 4082, Seattle, WA, June 2 - 5, 2014.
Bheemreddy, V., Huo, Z. and Chandrashekhara, K., "Simulation and Validation of Cure Kinetics for Cavity Molded Composites," Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE) Conference, Paper No. 4087, Seattle, WA, June 2 - 5, 2014.
Anandan, S., Dhaliwal, G. S., Chandrashekhara, K., Berkel, T. R. and Pfitzinger, D., "Post Curing Effects on Out-of- Autoclave BMI Composite Panels," Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE) Conference, Paper No. 4084, Paper No. 4082, Seattle, WA, June 2 - 5, 2014.
Tuwair, H., Hopkins, M., Volz, V., ElGawady, M., Chandrashekhara, K. and Birman, V., "An Experimental Study on Static Behavior of Structural Polyurethane Foam Infill for GFRP Bridge Deck Panels," Proceedings of the 1st International Conference on Mechanics of Composites, Paper No. 5080, Long Island, NY, June 8 - 12, 2014.
Tuwair, H., Volz, J., ElGawady, M., Mohamed, M., Chandrashekhara, K. and Birman, V., "Testing and Evaluation of GFRP Sandwich Bridge Deck Panels Filled with Polyurethane Foam," Proceedings of the 29th American Society for Composites Technical Conference/16th US-Japan Conference on Composite Materials, Paper No. 622, San Diego, CA, September 8 - 10, 2014.
Nicholas, J., Meinders, R., Chandrashekhara, K., Hilmas, G. and Castano, C., "Polymer Infiltration and Pyrolysis Fabrication of SIC/SIC Composite for Nuclear Applications," Paper No. 47679, pp. 1 - 13, Proceedings of the Composites and Advanced Materials Expo (CAMX) Conference, Orlando, FL, October 13 - 16, 2014.
Huo, Z., Mohamed, M., Wang, X. and Chandrashekhara, K., "Experiment and Simulation of Moisture Diffusion in Polyurethane Sandwich Structure," Paper No. 47685, pp. 1 - 14, Proceedings of the Composites and Advanced Materials Expo (CAMX) Conference, Orlando, FL, October 13 - 16, 2014.
Anandan, S., Bheemreddy, V., Kaur, A., Watkins, S. E., Chandrashekhara, K., Salour, A., Berkel, T. R. and Phan, N., "Strain Mapping of Bolted Composite Airframes Using Fiber Optic Sensors," Paper No. 47689, pp. 1 - 14, Proceedings of the Composites and Advanced Materials Expo (CAMX) Conference, Orlando, FL, October 13 - 16, 2014.
Dhaliwal, G. S., Mohamed, M., Chandrashekhara, K., Schuman, T., Volz, J. and Khayat, K., "Performance Evaluation of Polymer Modified Concrete Using Polyurethane and Poly (Vinyl Alcohol co-Ethylene)," Paper No. 47681, pp. 1 - 12, Proceedings of the Composites and Advanced Materials Expo (CAMX) Conference, Orlando, FL, October 13 - 16, 2014.
Hussein, R. M., Anandan, S. and Chandrashekhara, K., "Thermooxidative Behavior of Out-of-Autoclave Bismaleimide Composites," Paper No. 47741, pp. 1 - 13, Proceedings of the Composites and Advanced Materials Expo (CAMX) Conference, Orlando, FL, October 13 - 16, 2014.
Wei, L., Dharani, L. R., Chandrashekhara, K., Hilmas, G. E. and Fahrenholtz, W. G., "Modeling of Thermal and Mechanical Behavior of ZrB2-SiC Ceramic After High Temperature Oxidation," Journal of Ceramics, Vol. 2014, Article ID 169748, pp. 1 - 9, November 11, 2014.
Ashish Choudhari, Harini Ramaprasad, Sriram Chellappan, Bruce McMillin, Jonathan Kimball and Maciej Zawodniok, “Adaptive Scheduling with Explicit Congestion Notification in a CyberPhysical Smart Grid System”, in Proc. of Euromicro Conference series on Software Engineering and Advanced Applications (SEAA), Verona, Aug 2014.
Levi Malott and Sriram Chellappan, “Investigating the fractal nature of individual user NetFlow data”, in Proc. of Workshop on Hot Topics in Big data and Networking (Hot- Data), in conjunction with IEEE Intl. Conf. on Computer Communications and Networks (ICCCN), Shanghai, Aug 2014.
Jake Bielefeldt and Sriram Chellappan, “Sensor Authentication in Collaborating Sensor Networks”, in Proc. of IEEE IFIP Annual Mediterranean Ad Hoc Networking Workshop (MedHoc-Net), Piran, June 2014.
Adaptive Data Rate”, IEEE Globecom 2014.
Maggie X. Cheng, Yi Ling, Brian M. Sadler, “Wireless Ad Hoc Networks Connectivity Assessment and Relay Node Deployment”, IEEE Globecom, 2014.
Kenneth K. Fletcher, Xiaoqing (Frank) Liu, Maggie X. Cheng, “Aggregating Ranked Services for Selection”, IEEE SCC, 2014 (IEEE International Conference on Services Computing).
Bhanuchander R. Poreddy and Steven M. Corns (2014) “Efficient Logistics Model of Utilities for Forward Operating Bases,” accepted to 2014 American Society of Engineering Management Conference.
Lori Miller, Bhanuchander R. Poreddy and Steven M. Corns (2014) “Perspectives of Emergency Responders,” accepted to 2014 American Society of Engineering Management Conference.
Steven M. Corns, Ajay Thukral, Dustin Nottage, Jack Stein and Vijay Thukral, (2014) “Parametric Analysis Through a Model-based Reference Architecture for Medical Device Development,” 24th Annual International Symposium of the International Council on Systems Engineering INCOSE2014.
George Shannon, Steven M. Corns, and Donald C. Wunsch II (2014) “Discovering Objective Functions for Tagging Medical Text Concepts,” Proceedings of the 2014 IEEE Conference on Computational Intelligence in Bioinformatics and Computational Biology.
Maigha and M. L. Crow, “Clustering-based Methodology for Optimal Residential Time of Use Design Structure,” Proceedings of the 2014 North American Power Symposium, Pullman, WA, September 2014.
Xin Qiu, Tu. Nguyen, and M. L. Crow, “Modeling of Vanadium Redox Battery by Field Analysis and Neural Network Approach,” Power and Energy Conference at Illinois (PECI), Urbana, IL, March 2014.
A. Gosavi, S. K. Das, and S. L. Murray, “Beyond Exponential Utility Functions: A Variance-Adjusted Approach for Risk-Averse Reinforcement Learning,” Proceedings of IEEE Symposium Series on Computational Intelligence (SSCI), Orlando, FL, pp. 1-8, Dec 2014.
- Khan, S. K. A. Imon, and S. K. Das, “Ensuring Energy Efficient Coverage for Participatory Sensing in Urban Streets,” Proceedings of International Conference on Smart Computing (SMARTCOMP), Hong Kong, Nov. 2014. (Best Paper Award)
- Fajri, A. Prabhala, N. Lotfi, P. Shamsi, and M. Ferdowsi, “Emulating electric vehicle regenerative and friction braking effect using a hardware-in-the-loop (HIL) motor/dynamometer test bench,” in Proc. IEEE Annual Conference of the Industrial Electronics Society (IECON), Dallas, TX, Oct. 2014.
- Saxena and M. Zawodniok, “Indoor Positioning System Using Geo-Magnetic Field,” Proc. of IEEE I2MTC 2014, pp. , May 2014
- R. Zheng, Z. Yang, M. Yue, B. Han, Z. Chen, and J. Wang, “DSP Implementation of Direct-Sequence Spread Spectrum Underwater Acoustic Modems with Networking Capability,” MTS/IEEE OCEANS, St. John’s, NL, Canada, Sep. 14-18, 2014. Pp. 1-5.
T. Luo, S. Kanhere, H. P. Tan, and S. K. Das, “Optimal Prizes for All-Pay Contests in Heterogeneous Crowdsourcing,” Proceedings of 11th IEEE International Conference on Mobile Ad-hoc and Sensor Systems (MASS), Philadelphia, USA, Oct 2014.
A. Khan, S. K. A. Imon, and S. K. Das, “An Energy Efficient Framework for Localization and Coverage in Participatory Urban Sensing,” Proceedings of 39th Annual IEEE Conference on Local Computer Networks (LCN), Vancouver, Canada, pp. 193-201, Sept 2014.
M. Raj, K. Kant, and S. K. Das, “E-DARWIN: Energy Aware Disaster Recovery Network using WiFi Tethering,” Proceedings of 23rd International Conference on Computer Communications and Networks (ICCCN), Shanghai, China, pp. 1-8, Aug 2014.
J. Podolanko, S, Datta, and S. K. Das, “Performance Analysis of Real-Time Traffic over 802.11n Wireless Local Area Networks: An Experimental Study,” Proceedings of International Conference on Wireless Communications and Mobile Computing (IWCMC), Nicosia, Cyprus, pp. 453-457, Aug 2014.
F. Restuccia and S. K. Das, “FIDES: A Trust-based Framework for Secure User Incentivization in Participatory Sensing,” Proceedings of 15th IEEE International Symposium on a World of Wireless, Mobile and Multimedia Networks (WoWMoM), Sydney, Australia, June 2014.
M. Shariar and S. K. Das, “CONNECT: Consociating Opportunistic Network Neighbors for Constructing a Consistent and Connected Virtual Backbone,” Proceedings of 15th IEEE International Symposium on a World of Wireless, Mobile and Multimedia Networks (WoWMoM), Sydney, Australia, June 2014.
S. K. A. Imon, A. Khan, and S. K. Das, “EFFECT: An Energy Efficient Framework for Data Compression in Tree-based Wireless Sensor Networks,” Proceedings of 15th IEEE International Symposium on a World of Wireless, Mobile and Multimedia Networks (WoWMoM), Sydney, Australia, June 2014.
V. Sheth, Y. Wan, X. Junfei, S. Fu, Z. Lin, and S. K. Das, “On Properties of Quantized Consensus in Multi-Layer Multi-Group Sensor Networks,” Proceedings of IEEE Conference on Distributed Computing in Sensor Systems (DCOSS), Marina Del Ray, CA, pp. 217-224, May 2014.
A. Rodrigues-Carrion, S. K. Das, C. Campo, and C. Garcia-Rubio, “Impact of Location History Collection Schemes on Observed Human Mobility Features,” Proceedings of IEEE PerCom Workshop on Impact of Human Mobility in Pervasive Systems and Applications (PerMoby), Budapest, Hungary, pp. 254-259, Mar 2014.
Du, X., "Teaching Uncertainty in Design and Analysis Courses," the ASME 2014 International Design and Engineering Technical Conferences & Computers and Information in Engineering Conference, Buffalo, NY, August, 2014.
Hu, Z. and Du, X., "Efficient Global Optimization Reliability Analysis (EGORA) for Time-Dependent Limit-State Function," the ASME 2014 International Design and Engineering Technical Conferences & Computers and Information in Engineering Conference, Buffalo, NY, August, 2014.
Zhang, X., Du, X., Wang, R., "Improvement Design For Rollover Accidents Involving Large Passenger Vehicles," the ASME 2014 International Design and Engineering Technical Conferences & Computers and Information in Engineering Conference, Buffalo, NY, August, 2014.
M. Khazraei, A. Prabhala, and M. Ferdowsi, “A new control strategy for a class of multiple-input Dc-Dc converters,” in Proc. IEEE International Conference on Renewable Energy Research and Applications (ICRERA), Milwaukee, WI, Oct. 2014.
H. Sepahvand, K. Corzine, S. Bhattacharya, and M. Ferdowsi, “Topology selection for medium-voltage three-phase SiC solid-state transformer,” in Proc. IEEE International Conference on Renewable Energy Research and Applications (ICRERA), Milwaukee, WI, Oct. 2014.
B. Baddipadiga and M. Ferdowsi, “Eliminating transformer DC current in Dc-Dc dual active bridge converters,” in Proc. IEEE International Conference on Renewable Energy Research and Applications (ICRERA), Milwaukee, WI, Oct. 2014.
A. Prabhala and M. Ferdowsi, “DC distribution systems – an overview,” in Proc. IEEE International Conference on Renewable Energy Research and Applications (ICRERA), Milwaukee, WI, Oct. 2014. (Best Poster Award)
A. Prabhala, V. Gouribhatla, P. Fajri, and M. Ferdowsi, “A multiport Dc-Dc converter with high voltage gain,” in Proc. IEEE International Telecommunications Energy Conference (INTELEC), Vancouver, Canada, Sept. 2014.
M. Khazraei, V. A. K. Prabhala, R. Ahmadi, and M. Ferdowsi, “Solid-sate transformer stability and control considerations,” in Proc. IEEE 29th Applied Power Electronics Conference and Exposition (APEC), Fort Worth, TX, Mar. 2014, pp. 2237-2244.
R. Ahmadi and M. Ferdowsi, “Modeling closed-loop input and output impedances of dc-dc power converters operating inside dc distribution systems,” in Proc. IEEE 29th Applied Power Electronics Conference and Exposition (APEC), Fort Worth, TX, Mar. 2014, pp. 1131-1138.
S. Lee and M. Ferdowsi, “Phase-shifted modulation strategy for voltage balancing in neutral-point clamped converter,” in Proc. IEEE 29th Applied Power Electronics Conference and Exposition (APEC), Fort Worth, TX, Mar. 2014, pp. 202-208.
Bharath Samanthula, Wei Jiang and Elisa Bertino, “Privacy-Preserving Complex Query Evaluation over Semantically Secure Encrypted Data", the 19th European Symposium on Research in Computer Security (ESORICS), Wroclaw, Poland, September 7-11, 2014.
L. Müller, J. W. Kimball, "Effects of stray inductance on hard-switched switched capacitor converters," in Proc. Power and Energy Conference at Illinois (PECI), 2014.
M. Rasheduzzaman, J. Mueller, J. W. Kimball, "Small-signal modeling of a three-phase isolated inverter with both voltage and frequency droop control," in Proc. Applied Power Electronics Conference (APEC), 2014, pp. 1008-1015.
M. Rasheduzzaman, T. Paul, J. W. Kimball, "Markov jump linear system analysis of microgrid stability," in Proc. American Control Conference, 2014, pp. 5062-5066.
J. A. Mueller, A. Sankara, J. W. Kimball, B. McMillin, "Hidden Markov models for nonintrusive appliance load monitoring," in Proc. North American Power Symposium, 2014, pp. 1-6.
Choudhari, H. Ramaprasad, S. Chellappan, B. McMillin, J. Kimball, M. Zawodniok, "Adaptive Scheduling with Explicit Congestion Notification in a Cyber-Physical Smart Grid System," in Proc. 40th Euromicro Conference on Software Engineering and Advanced Applications, 2014, pp. 309-317
L. Müller, J. W. Kimball, "Dual-input high gain dc-dc converter based on the Cockroft-Walton multiplier," in Proc. IEEE Energy Conversion Congress and Exposition, 2014, pp. 5360-5367.
F. Alfaris, A. Alzahrani, J. W. Kimball, "Stochastic model for PV sensor array data," in Proc. International Conference on Renewable Energy Research and Application (ICRERA), 2014, pp. 798-803.
“Modeling and Characterization of Fused Deposition Modeling Tooling for Vacuum Assisted Resin Transfer Molding Process,” H. Li, G. Taylor, V. Bheemreddy, O. Iyibilgin, M. Leu and K. Chandrashekhara, Paper Number 4082, pp. 1-14, Proceedings of SAMPE Technical Conference, Seattle, WA, June 2-5, 2014.
“Composition Optimization for Three-Dimensional Parts with Functionally Gradient Materials,” A. Ghazanfari and M. C. Leu, Proceedings of the ASME 2014 Manufacturing Science and Engineering Conference (MSEC 2014), Detroit, MI, June 9-13, 2014.
“Effect of Paste Properties on Extrudate Freezing Time in Freeze-Form Extrusion Fabrication Processes,” M. Li, R. G. Landers, and M. C. Leu, Proceedings of the ASME 2014 Manufacturing Science and Engineering Conference (MSEC 2014), Detroit, MI, June 9-13, 2014.
“Optimal Design, Numerical Simulation, and Experimental Testing of Bipolar Plates with Pin-Type Flow Fields for Polymer Electrolyte Membrane (PEM) Fuel Cells,” M. C. Leu and N. Guo, Proceedings of 2014 International Symposium on Flexible Automation (ISFA2014), Awaji-Island, Hyogo, JAPAN, 14 - 16 July, 2014.
“A Framework and Prototype System for Cloud-Based Additive Manufacturing,” I. H. Selvi, T. Over, K. Fletcher, O. Iyibilgin, M. C. Leu, and F. X. Liu, Proceedings of 2014 International Symposium on Flexible Automation (ISFA2014), Awaji-Island, Hyogo, JAPAN, 14 - 16 July, 2014.
“In Vitro Assessment of Pore Geometry of Borate Bioactive Glass Scaffolds Made by Laser Sintering,” K. C. R. Kolan, M. C. Leu, A. Thomas, and G. E. Hilmas, Proceedings of Solid Freeform Fabrication Symposium, Austin, TX, August 4-6, 2014.
Anna Squicciarini, Dan Lin, Smitha Sundareswaran, and Jingwei Li, \Policy Driven Node Selection in MapReduce", 10th International Conference on Security and Privacy in Communication Networks (SecureComm), 2014.
Jingwei Li, Dan Lin, Anna Squicciarini, and Chunfu Jia, \STRE: Privacy-Preserving Storage and Retrieval over Multiple Clouds", 10th International Conference on Security and Privacy in Communication Networks (SecureComm), 2014.
Francis, R., Newkirk, J. W. and Liou, F., "A Hybrid Manufacturing Process for Producing or Repairing Parts with Forged‐Like Microstructure," Proceedings of the 25th Solid Freeform Fabrication Symposium, Austin, TX, August 4 ‐ 6, 2014.
Dongare, S., Sparks, T., Newkirk, J. and Liou, F., "A Mechanical Testing Methodology for Additive Manufacturing Processes," Proceedings of the 25th Solid Freeform Fabrication Symposium, Austin, TX, August 4 ‐ 6, 2014.
Liu, R., Wang, Z., Sparks, T. and Liou, F., "Stereo Vision Based Laser Deposition of Ti‐6Al‐4V in Component Repair Process," Proceedings of the 25th Solid Freeform Fabrication Symposium, Austin, TX, August 4 ‐ 6, 2014.
Karnati, S., Sparks, T. and Liou, F., "Thermo‐Graphic Investigation of Laser Metal Deposition," Proceedings of the 25th Solid Freeform Fabrication Symposium, Austin, TX, August 4 ‐ 6, 2014.
Karnati, S., Palepu, S., Sparks, T., Liou, F. and Nedic, C., "Contrast of Repair Capabilities Between Laser Metal Deposition and Tig Welding on TI‐6AL‐4V," Proceedings of the ASME 2014 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2014), Paper No. ASME DETC2014‐35524, pp. 1 ‐ 9, Buffalo, NY, August 17 ‐ 20, 2014.
Liou, F., "On Robotic 3‐D Printing," International Forum on Systems and Mechatronics," Tainan, Taiwan, October 12 ‐ 15, 2014.
Liou, F., "Process Modeling and Qualification of Metal Additive Manufacturing," Additive Aerospace 2014, Qualification Technical Symposium, November 3 ‐ 6, 2014.
Kenneth K. Fletcher, Xiaoqing (Frank) Liu, Maggie X. Cheng, “Aggregating Ranked Services for Selection,” Proc. of 2014 IEEE International Conference on Services Computing, Anchorage, Alaska, June, 2014.
Mingdong Tang, Yu Xu, Jianxun Liu, Zibin Zheng, Xiaoqing (Frank) Liu, “Combining Global and Local Trust for Service Recommendation,”, Proc. of 2014 IEEE International Conference on Web Services, Anchorage, Alaska, June, 2014.
Xiaoqing Liu, Nagaprashanth Chanda and Eric Christopher Barnes, “Software Architecture Rationale Capture through Intelligent Argumentation,” Proc. of 2014 International Conference on Software Engineering & Knowledge Engineering, July 1-3, 2014, Vancouver, Canada.
Eric Barnes and Xiaoqing Liu, “Text-Based Clustering and Analysis of Intelligent Argumentation Data,” Proc. of 2014 International Conference on Software Engineering & Knowledge Engineering, July 1-3, 2014, Vancouver, Canada.
Ihsan H. Selvi, Tijen Over Ozcelik, Kenneth Fletcher, Osman Iyibilgin, Ming C. Leu, and Xiaoqing (Frank) Liu, "A framework and prototype system for cloud-based additive manufacturing", Proceedings of 2014 International Symposium on Flexible Automation, Awaji-Island, Hyogo, Japan, 14 - 16 July, 2014.
Schmidt, Sean1 and Long, Suzanna2, “Economic Analysis of a Utility Owned Small Scale Solar Photovoltaic System,” Proceedings of the American Society for Engineering Management 2014 International Annual Conference S. Long, E-H. Ng, and C. Downing eds., Virginia Beach, VA, October 2104.
Sipaun, Susan1, Long, Suzanna2, Usman, Shoab and Awuah-Offei, Kwame, “Supply Chain Feasibility Analysis of Small Modular Reactor Technology,” Proceedings of the American Society for Engineering Management 2014 International Annual Conference S. Long, E-H. Ng, and C. Downing eds., Virginia Beach, VA, October 2104.
Ramachandran, Varun1, Long, Suzanna, Corns, Steven, Shoberg, Tom, Carlo, Hector J., “Restoration of Supply Chain Interdependent Critical Infrastructures in the Aftermath of an Extreme Event: An Agent Based Modeling Approach,” Proceedings of the American Society for Engineering Management 2014 International Annual Conference S. Long, E-H. Ng, and C. Downing eds., Virginia Beach, VA, October 2104. Abstract only.
Schmidt, Sean1, Kothapalli, Venkat Sravan1, Long, Suzanna2 and Qin, Ruwen, “Comparison of Statistical Analysis Methodologies for LED Indication Replacement Schedules,” Proceedings of the 2014 Industrial and Systems Engineering Research Conference, Y. Guan and H. Liao, eds., Montreal, Canada, May 2014.
Brennan, Cory1 and Long, Suzanna2, “Evaluation of a Plug-in Electric Shuttle to a Rural Community as an Initial Transit Service,” Proceedings of the 2014 Industrial and Systems Engineering Research Conference, Y. Guan and H. Liao, eds., Montreal, Canada, May 2014.
Oztanriseven, Furkan1, Perez-Lespier, Lizzette1, Long, Suzanna and Nachtmann, Heather, “A Review of System Dynamics in Maritime Transportation,” Proceedings of the 2014 Industrial and Systems Engineering Research Conference, Y. Guan and H. Liao, eds., Montreal, Canada, May 2014.
Álvarez, Wilson F.1, Vigo, Alejandro1, Carlo, Héctor J., Long, Suzanna, Shoberg, Tom and Corns, Steven M., “A Mathematical Model for Supply Chain Network Infrastructure Restoration,” Proceedings of the 2014 Industrial and Systems Engineering Research Conference, Y. Guan and H. Liao, eds., Montreal, Canada, May 2014.
Schmidt, Sean1, Long, Suzanna, and Harper, Jennifer, “Economic and Technical Feasibility of LED Lighting on State Routes in Missouri,” Proceedings of the Transportation Research Board, Washington, D.C., January 2014.
Tommy Szalapski and Sanjay K Madria, Energy Efficient Distributed Grouping and Scaling for Real-Time Data Compression in Sensor Networks, in 33rd IEEE International Performance, Computing, and Communication Conference (IPCCC) 2014, pp. 1-9, Austin, US.
Tommy Szalapski and Sanjay K Madria, Toward Energy Efficient Multistream Collaborative Compression in Wireless Sensor Networks, to appear in 10th IEEE International Conference on Collaborative Computing: Networking, Applications and Worksharing, 2014, Miami, USA (IEEE Best Student Paper Award)
Vimal Kumar and Sanjay Madria, Efficient and Secure Code Dissemination in Sensor Clouds, in proceedings of 15th IEEE Conference on Mobile Data Management, Brisbane, Australia, 2014, pp.103-112.
Venkata Krishna Suhas Nerella, Sanjay Madria and Thomas Weigert, Efficient Caching and Incrementalization of Object Queries on Collections in Programming Codes, 38th IEEE International Computers, Software, and Applications Conference (COMPSAC), Västerås, Sweden 21–25 July, 2014, pp. 229.238.
Roy Cabaniss and Sanjay Madria, Content Distribution in Delay-Tolerant Networks using Social Context, in proceedings of 7th IFIP Wireless and Mobile Networking Conference (WMNC 2014), Portugal, pp. 1-8
Nilesh Padhariya, Ouri Wolfson, Anirban Mondal, Sanjay Madria and Varun Gandhi, E-VeT: Economic Reward/Penalty-based System for Vehicular Traffic Management, in proceedings of 15th IEEE Conference on Mobile Data Management, pp. 99-103, Brisbane, Australia, 2014.
Jiyin He, Kai Kunze, Christoph Lofi, Sanjay K Madria, and Stephan Sigg, Towards Mobile Sensor-Aware Crowdsourcing: Architecture, Opportunities and Challenges, in UnCrowd 2014: DASFAA Workshop on Uncertain and Crowdsourced Data, Bali, Indonesia, 2014, pp. 403-412.
Amartya Sen and Sanjay Madria, Off-line Risk Assessment of Cloud Service Providers, in proceedings of Second IEEE International Workshop on Cloud Security Auditing, Alaska, USA, 2014, pp. 58-65.
Gerald Howser and Bruce McMillin, “A Modal Model of Stuxnet Attacks on Cyber-physical Systems: A Matter of Trust,” Software Security and Reliability, 2014 Eighth International Conference on, June 30 2014-July 2 2014, pp.225-234,
10.1109/SERE.2014.36.
Choudhari, A.; Ramaprasad, H.; Chellappan, S.; McMillin, B.; Kimball, J.; Zawodniok, M., "Adaptive Scheduling with Explicit Congestion Notification in a Cyber-Physical Smart Grid System," Software Engineering and Advanced Applications (SEAA), 2014 40th EUROMICRO Conference on , vol., no., pp.309,317, 27-29 Aug. 2014
10.1109/SEAA.2014.39
J. Mueller, A. Sankara, J. Kimball, and B. McMillin, “Hidden Markov Models for Nonintrusive Appliance Load Monitoring,” Proceedings of the 2014 North American Power Symposium, Pullman, WA, September 7-9, 2014.
Li Feng and Bruce McMillin, “Quantification of Information Flow in a Smart Grid,” Computer Software and Applications Conference Workshops (COMPSACW), 2014 IEEE 38th International, 21-25 July 2014, pp.140-145,10.1109/COMPSACW.2014.27.
Okafor, A. Chukwujekwu and Natarajan, Shridhar, “Acoustic Emission Monitoring of Tensile Testing of Corroded and Un-corroded Clad Aluminum 2024-T3 and Characterization of Effects of Corrosion on AE Source Events and material Tensile Property,” 40th Annual Review of Progress in Quantitative Nondestructive Testing Evaluation, AIP Conference Proceedings 1581, 492-500 (2014), DOI: 10.1063/1.4864860; © AIP Publishing.
Okafor, A. Chukwujekwu and Dutta, Amitabha, “Non-Destructive Evaluation of Concrete with Ultrasonic C-Scan and Digital Image Enhancement Technique, 40th Annual Review of Progress in Quantitative Nondestructive Testing Evaluation, AIP Conference Proceedings, 1581, 925-933 (2014), DOI: 10.1063/1.4864920., © 2014 AIP Publishing.
Schmidt, S.M., S. Long, V.S. Kothapallib, R. Qin. Comparison of statistical analysis methodologies for LED indication replacement schedules. In Proceeding of 2014 Industrial and Systems Engineering Research Conference (ISERC). Montreal, Canada. 2014.
Jia Cai, Hasan Ferdowsi, and S. Jagannathan, “Model-based fault diagnosis and prediction for a class of distributed parameter systems, “ Proc. of the IEEE Conference on Decision and Control, pp. 5758-5763, Dec 2014.
A. Sahoo and S. Jagannathan, “Event-triggered optimal regulation of uncertain linear discrete-time systems by using Q-learning scheme, “ Proc. of the IEEE Conference on Decision and Control, pp. 1227-1232, Dec 2014.
A. Sahoo, Hao Xu, T. Dierks, and S. Jagannathan, “Event-triggered optimal control of nonlinear continuous-time systems in affine form by using neural networks,” Proc. of the IEEE Conference on Decision and Control, pp. 1233-1238, Dec 2014.
B. Talaei, Hao Xu, and S. Jagannathan, “Near optimal boundary control of distributed parameter systems modeled as parabolic PDEs by using finite difference neural network approximation”, Proc. of the IEEE Conference on Decision and Control, pp, 6776-6781, Dec 2014.
B. Thumati, and S. Jagannathan, “A fault prediction scheme for Takagi-Sugeno fuzzy systems with immeasurable premise variables and disturbance”, Proc. of the IEEE Conference on Decision and Control, pp. 6758-6763, Dec 2014.
Avimanyu Sahoo, Hao Xu and S. Jagannathan, “Event-based optimal regulator design for nonlinear networked control systems”, Proc. of the Adaptive Dynamic Programming and Reinforcement Learning, pp. 295-300, Dec 2014.
Haci Mehmet Guzey, Hao Xu and Jagannathan Sarangapani, “Neural network-based adaptive optimal consensus control of leaderless networked mobile robots”, Proc. of the Adaptive Dynamic Programming and Reinforcement Learning, pp. 198-205, Dec 2014.
Hao Xu and S. Jagannathan, “Model-free Q-learning over finite horizon for uncertain linear continuous-time systems”, Proc. of the Adaptive Dynamic Programming and Reinforcement Learning, pp. 164-169, Dec 2014.
Haifeng Niu and S. Jagannathan, “'A Gen2v2 Compliant RFID authentication and ownership management protocol”, Proc. of the IEEE Conference on Local Computer Networks, pp. 331-336, September 2014.
Haifeng Niu and S. Jagannathan, “'A cross layer routing scheme for passive RFID tag-to-tag communication”, Proc. of the IEEE Conference on Local Computer Networks, pp. 438-441, September 2014.
B. Talaei, Hao Xu, and S. Jagannathan, “Neural network-based near optimal constrained control of distributed parameter systems with application to diffusion-reaction processes,” Proc. of the IEEE Multi Conference on Systems and Control, pp. 1861-1866, Oct. 2014.
Hao Xu and S. Jagannathan, “Near optimal event triggered control of nonlinear continuous-time systems using input-output data”, World Congress of Intelligent Control and Automation, Shenyang China, July 2014.
Hao Xu and S. Jagannathan, “Finite horizon stochastic optimal control of nonlinear two-player zero-sum games under communication constraint”, Proc. of the International Joint Conference on Neural Networks, Beijing China, pp. 239-244, July 2014.
Avimanyu Sahoo, Hao Xu and S. Jagannathan, “Near optimal event-based control of nonlinear discrete-time systems in affine form with measured input-output data”, Proc. of the International Joint Conference on Neural Networks, Beijing China, pp. 3671-3676, July 2014.
Hao Xu, Qiming Zhao, Travis Dierks, and S. Jagannathan “Finite-horizon approximately optimal control of uncertain affine nonlinear continuous-time systems”, Proc. of the American Controls Conference, pp. 1243-1248, June 2014.
Qiming Zhao, Hao Xu, and S. Jagannathan, “Fixed final-time near optimal regulation of nonlinear discrete-time systems in affine form using output feedback”, Proc. of the American Controls Conference, pp. 4643-4648, June 2014.
Hasan Ferdowsi and S. Jagannathan, “Fault diagnosis of a class of distributed parameter systems modeled by parabolic partial differential equations”, Proc. of the American Controls Conference, pp. 5434-5439, June 2014.
H. Zargarzadeh, S. Jagannathan, James A. Drallmeier, “Extremum-seeking for nonlinear discrete-time systems with application to HCCI Engines”, Proc. of the American Controls Conference, pp. 861-866, June 2014.
Avimanyu Sahoo*, Hao Xu, S. Jagannathan, “Neural network approximation-based event-triggered control of uncertain MIMO nonlinear discrete time systems”, Proc. of the American Controls Conference, pp. 2017-2022, June 2014.
Marashi, S. Sedigh Sarvestani, and A. R. Hurson. Analyzing the negative effect of interdependency on reliability of cyber-physical systems. In SAFECOMP, 2015, submitted.
Mark Woodard, Steven White, and Sahra Sedigh Sarvestani. Survivability modeling for cyber-physical critical infrastructure systems. In Proceedings of the 6th ACM/IEEE International Conference on Cyber-Physical Systems, 2015, rejected, under revision for submission to alternate venue.
A. Avritzer, L. Carnevali, L. Happe, B. R. Haverkort, A. Koziolek, D. Menasche, A. Remke, and S. Sedigh Sarvestani. Survivability evaluation of gas, water and electricity infrastructures. In Proceedings of the 7th International Workshop on Practical Applications of Stochastic Modelling (PASM ’14), Newcastle upon Tyne, UK, May 2014.
M. Al-Basrawi, N. Jarus, K. Joshi, and S. Sedigh Sarvestani. Analysis of reliability and resilience for smart grids. In Proceedings of the 38th IEEE International Computers, Software and Applications Conference (COMPSAC ’14), Vasteras, Sweden, Jul. 2014.
K. Marashi and S. Sedigh. Towards comprehensive modeling of reliability for smart grids: Requirements and challenges. In Proceedings of the 15th IEEE International High Assurance Systems Engineering Symposium (HASE ’14), Miami, USA, Jan. 2014.
P. Shamsi, “Applications of non-Markovian hybrid Petri-nets in power engineering,” IEEE Industrial Electronics, IECON 2014 - 40nd Annual Conference on, Presented in Nov 2014.
P. Faraji, V. Anand, N. Lotfi, M. Ferdowsi, P. Shamsi, “Emulating electric vehicle regenerative and friction braking effect using a hardware in the loop (HIL) motor/dynamometer test bench,” IEEE Industrial Electronics, IECON 2014 - 40nd Annual Conference on, Presented in Nov 2014.
X. Li, P. Shamsi, “Adaptive model predictive current control for DSSRM drives,” IEEE Transportation Electrification Conference and Expo (ITEC) 2014, pp.1-5, 15-18 June 2014.
D. Ursu, P. Shamsi, B. Fahimi and I. Boldea, “5 phase BLDC-MRM: Design, Control, FEA and Steady-State Operation Experiments,” 14th International Conference on. Optimization of electrical and electronic equipment OPTIM, Romania, pp.354-361, 22-24 May 2014.
P. Shamsi, “Extended averaging method for power supply systems with multiple switching frequencies,” IEEE Applied Power Electronics Conference and Exposition (APEC), 2014, pp.2842-2846, 16-20 March 2014.
Jasenko Hosic, Daniel R. Tauritz, and Samuel A. Mulder. Evolving Decision Trees for the Categorization of Software. In Proceedings of the 38th IEEE Annual Computers, Software and Applications Conference Workshops (COMPSACW '14), pages 337-342, Vasteras, Sweden, July 21-25, 2014.
George Rush, Daniel R. Tauritz, and Alexander D. Kent. DCAFE: A Distributed Cyber Security Automation Framework for Experiments. In Proceedings of the 38th IEEE Annual Computers, Software and Applications Conference Workshops (COMPSACW '14), pages 134-139, Vasteras, Sweden, July 21-25, 2014.
Matthew A. Martin and Daniel R. Tauritz. A Problem Configuration Study of the Robustness of a Black-Box Search Algorithm Hyper-Heuristic. In Proceedings of the 16th Annual Conference Companion on Genetic and Evolutionary Computation (GECCO '14), pages 1389-1396, Vancouver, BC, Canada, July 12-16, 2014.
Matthew A. Martin and Daniel R. Tauritz. Multi-Sample Evolution of Robust Black-Box Search Algorithms. In Proceedings of the 16th Annual Conference Companion on Genetic and Evolutionary Computation (GECCO '14), pages 195-196, Vancouver, BC, Canada, July 12-16, 2014.
Khalid Al-Jabery, Donald C. Wunsch, Jinjun Xiong and Yiyu Shi," A Novel Grid Load Management Technique Using Electric Water Heaters and Q-Learning," in Proc. of IEEE Smart Grid Comm., Venice, Italy, 2014.
Donald Wunsch, Stephen Damelin, and Rui Xu, “Adaptive Resonance Theory and Diffusion Maps for Clustering Applications in Pattern Analysis,” Invited Opening Keynote, Model Reduction Across Disciplines, Leicester, U.K., August 19-22, 2014.
George Shannon, Steven Corns and Donald Wunsch, “Discovering Objective Functions for Tagging Medical Text Concepts,” IEEE Conference on Computational Intelligence in Bioinformatics and Computational Biology, May 2014.
J. Rovey, X. Yang, P. Friz, C. Hu, M. Glascock, “Plasmonic Force Propulsion for Small Spacecraft,” AIAA Propulsion and Energy Forum and Exposition 2014: 50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, APC-02, Cleveland, Ohio, July 29, 2014.
C. Hu, J. Gao, C. Mathai, S. Gangopadhyay, X. Yang, “Experimental Characterization of Optical Nonlocalities in Metal-Dielectric Multilayer Metamaterials,” in CLEO:2014 Conference, JTh2A.113, San Jose, CA, June 12, 2014.
L. Sun, X. Yang, J. Gao, “Broadband Epsilon-Near-Zero Metamaterials with Step-like Metal-Dielectric Multilayer Structures with Gain Media,” in CLEO:2014 Conference, JTu4A.33, San Jose, CA, June 10, 2014.
L. Sun, J. Gao, X. Yang, “Giant Optical Nonlocality near the Dirac Point in Metal-Dielectric Multilayer Metamaterials,” in CLEO:2014 Conference, JTh2A.115, San Jose, CA, June 12, 2014.
X. Yang, F. Cheng, R. Soref, “Single-Mode GeSn Mid-Infrared Waveguides on Group-IV Substrates,” in CLEO:2014 Conference, JTh2A.57, San Jose, CA, June 12, 2014.
C. Hu, H. Deng, D. Rosenmann, D. Czaplewski, X. Yang, J. Gao, “Experimental Demonstration of Near-Infrared Epsilon-Near-Zero Multilayer Metamaterial Slabs,” in CLEO:2014 Conference, JW2A.120, San Jose, CA, June 11, 2014.
F. Cheng, X. Yang, J. Gao, “Enhancing Refractive Index Sensing Capability with Infrared Plasmonic Perfect Absorbers,” in CLEO:2014 Conference, JW2A.94, San Jose, CA, June 11, 2014.
Mingzhong Li and Zhaozheng Yin, “Debugging Object Tracking Results by a Recommender System with Correction Propagation,” Asian Conference on Computer Vision (ACCV) workshop on User-Centered Computer Vision, 2014.
Zhaozheng Yin, Hang Su, Elmer Ker, Mingzhong Li and Haohan Li, “Cell-Sensitive Microscopy Imaging for Cell Image Segmentation,” the 17th International Conference on Medical Image Computing and Computer Assisted Intervention (MICCAI), 2014.
Yunxiang Mao, Haohan Li, and Zhaozheng Yin, “Who Missed the Class? – Unifying Multi-face Detection, Tracking and Recognition in Videos,” IEEE Intl. Conference on Multimedia & Expo (ICME), 2014.
Hang Su, Zhaozheng Yin, Takeo Kanade, and Seungil Huh, “Interactive Cell Segmentation based on Correction Propagation,” IEEE International Symposium on Biomedical Imaging (ISBI), 2014.
Chenglin Wu, Zhaozheng Yin and Genda Chen, “Full-field Displacement Measurement of Highway Bridges through Visual Mark Tracking,” The Transportation Research Board (TRB) 93rd Annual Meeting, 2014.
A.M.M. Chandran and M. Zawodniok, “Transmitter Leakage Analysis When Operating USRP (N210) in Duplex Mode” to appear in Proc. Of IEEE I2MTC 2015, May 2015.
S. Ebrahimi Asl, M. Behgam, M. Zawodniok, and M.T. Ghasr, “Experimental Validation of Minimum Variance Unbiased Estimator of Structural Scattering Coefficient for an RFID antenna Using Linear Model,” Proc. of IEEE I2MTC 2014, pp. 1-1, May 2014
V. Thotla and M. Zawodniok, “Hurst Parameter Based Detection of Multiple Super Regenerative Receivers Using MVDR,” Proc. of IEEE I2MTC 2014, pp. , May 2014
A. Choudhari, H. Ramaprasad, S. Chellappan, B. McMillin, J. Kimball, and M. Zawodniok, “Adaptive Scheduling with Explicit Congestion Notification in a Cyber-Physical Smart Grid System,” presented at the Software Engineering and Advanced Applications (SEAA), 2014 40th EUROMICRO Conference on, 2014, pp. 309–317.
W. Zeng, Y. R. Zheng, and R. Schober, “Online Resource Allocation for Energy Harvesting Downlink MIMO Systems with Finite-Alphabet Inputs,” IEEE ICC 2015. London, UK, Jun. 9-13, 2015. pp. 1-6.
X. Yang, Y. R. Zheng, and L. Ma, “Automated Cardiac Self-gated Radial CMRI,” IEEE Intl. Symp. Medical Measurements Applications (MeMeA). Torino, Italy, May 7-9, 2015. pp. 1-4.
X. Yang, Y. R. Zheng, M. Yang, and L. Ma, “Compressed Sensing with Non-Uniform Fast Fourier Transform for Radial Ultra-Short Echo Time (UTE) MRI,” IEEE Intl. Symp. Biomedical Imaging. Brooklyn, NY, April 16-19, 2015. pp. 1-4.
W. Zeng, Y. R. Zheng, and C. Xiao, “Energy Harvesting Transmitter with Finite-Alphabet Inputs and Statistical CSI: Online Precoding by Dynamic Programming,” IEEE Globecom 2014. Austin, TX, Dec. 7-11, 2014. pp. 1-6.
W. Duan and Y. R. Zheng, “Bidirectional Soft-Decision Feedback Equalization for Robust MIMO Underwater Acoustic Communications,” MTS/IEEE OCEANS, St. John’s, NL, Canada, Sep. 14-18, 2014. pp. 1-6.
N. Ahmed, J. Hoyt, A. Radchenko, D. Pommerenke, and Y.R. Zheng, “A Multi-Coil Magneto-Inductive Transceiver for Low-Cost Wireless Sensor Networks,” IEEE UComms, Sestri Levante, Italy, Sep 3-5, 2014. Pp. 1-5.
C. Qian, J. Wu, Y.R. Zheng, and Z. Wang, “Low Complexity Detection Algorithm for Under-Determined MIMO Systems,” IEEE Int. Conf. Comm. (ICC), Sydney, Australia, Jun 9-13, 2014. Pp. 1-6.
G. Wang, J. Wu, and Y.R. Zheng, “An Accurate Frame Error Rate Approximation of Coded Diversity Systems,” IEEE Int. Conf. Comm. (ICC), Sydney, Australia, Jun 9-13, 2014. Pp. 1-6.
Z. Yang, and Y.R. Zheng, “Robust Adaptive Channel Estimation in MIMO Underwater Acoustic Communications,” MTS/IEEE OCEANS, Taipei, Taiwan, April 7-10, 2014. Pp. 1-5.
E. Tan, M. Yang, L. Ma, and Y.R. Zheng, “Implementation of compressive sensing for preclinical cine-MRI,” SPIE Medical Imaging, San Diego, CA, Feb.15-20, 2014.
Non-Refereed Conference Papers
Varun Ramachandran, Suzanna Long, Tom Shoberg, Steven Corns, Hector Carlo (2014) “The Importance of Geospatial Referencing for Urban Supply Chain Infrastructure Data to Large-Scale Disaster Restoration Modeling,” The Geological Society of America Annual Meeting, Vancouver, Canada.
“Investigation of Sparse-Build Rapid Tooling by Fused Deposition Modeling,” O. Iyibilgin, M. C. Leu, G. Taylor, H. Li, and K. Chandrashekhara, Proceedings of Solid Freeform Fabrication Symposium, Austin, TX, August 4-6, 2014.
Donald Wunsch, “Results We’ve Seen and Results I Wish We’ve Seen in Reinforcement Learning,” seminar at Chinese University of Hong Kong, December 19, 2014.
Donald Wunsch, “Performance Issues for Extreme Learning Machines,” Keynote Presentation, The International Conference on Extreme Learning Machines, Singapore, December 9, 2014.
Donald Wunsch, “Agents, Hybrids, Signals, Object Nets: Directions in Adaptive Dynamic Programming,” Lecture Series in Complex Systems and Intelligence Science, Lecture No. 06-20141125-082, State Key Laboratory of Management and Control for Complex Systems, Chinese Academy of Sciences, Beijing, November 25, 2014.
Donald Wunsch, “Computational Intelligence Collaboration,” DeTao Knowledge Capital Seminar, Shanghai, November 11, 2014.
Donald Wunsch, “Innovations and Open Problems in Supervised, Unsupervised and Reinforcement Learning,” Invited Lecture, IEEE / INNS World Congress on Computational Intelligence, Beijing, July 7, 2014.
Donald Wunsch, “Innovations in Supervised, Unsupervised and Reinforcement Learning,” Intel New Business Initiatives Technical Seminar, Hillsboro, Oregon, June 2014.
2013
Refereed Conference Papers
Creamer, J.R., Sammons P.M., Bristow, D.A., Landers, R.G., Freeman, P., and Easley, S., 2013, “Table-Based Compensation for 5-Axis Machine Tools,” ASME IMECE.
Loganathan, M. and Bristow, D.A., 2013, “Analysis of a Bi-Harmonic Tapping Mode for Atomic Force Microscopy,” ASME Dynamic Systems and Control Conference, p. V002T18A004-1-8.
Sammons, P.M., Bristow, D.A., and Landers, R.G., 2013, “Iterative Learning Control of Bead Morphology in Laser Metal Deposition Processes,” Proc. of the American Controls Conference, p. 5942-5947.
Watkins, S.E., Robison, K.E., Taylor, G.A., Nicholas, J.R., Chandrashekhara, K., and Rovey, J.L., 2013, “Damage Assessment of Hydrokinetic Composite Turbine Blades Using Fiber Optic Sensors,” Proceedings of the SPIE Smart Structures/NDE Conference, San Diego, CA, Paper No. 8694-82.
Anandan, S., Nagarajan, S., Kaur, A., Chandrashekhara, K. and Xiao, H., 2013 “Monitoring of Out-of-Autoclave BMI Composites Using Fiber Optic Sensors,” SPIE Smart Structures/NDE Conference, San Diego, CA., Paper No. 8694-21.
Kaur, A., Nagarajan, S., Anandan, S., Yuan, L., Chandrashekhara, K., Watkins, S., and Xiao, H., 2013 “Embeddable Fiber Optic Strain Sensor for Structural Monitoring,” SPIE Smart Structures/NDE Conference, San Diego, CA, Paper No. 8692-63.
Li, H., Taylor, G.A., Abutunis, A.M., Chandrashekhara, K., Kashyap, A.R., and Kimball, J.W., 2013 “Design and Performance Evaluation of a Horizontal Axis Hydrokinetic Turbine System,” Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE) Conference, Long Beach, CA, Paper No. 3166, pp. 1-15.
Huo, Z., Bheemreddy, V., and Chandrashekhara, K., 2013 “Modeling and Simulation of Moisture Diffusion in Hybrid Fiber-reinforced Polymer Composites,” Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE) Conference, Long Beach, CA,
Paper No. 3163, pp. 1-15.
Anandan, S., Nagarajan, S., Chandrashekhara, K., Berkel, T., and Pfitzinger, D., 2013, “ Cure and Process Optimization for Manufacturing BMI Composites Using OOA Process”, Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE) Conference, Long Beach, CA, Paper No. 3162, pp. 1-14.
Bheemreddy, V., Huo, Z., Chandrashekhara, K., and Brack, R.A., 2013, “Process Optimization of Composite Flex Beams Using Neural Networks”, Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE) Conference, Long Beach, CA, Paper No. 3164, pp. 1-15.
Mohamed, M., Huo, Z., Hawkins, S., Chandrashekhara, K., Birman, V., and Volz, J., “Moisture Effects on Performance of Polyurethane Composite Sandwich Panels Manufactured Using VARTM,” 2013, Proceedings of the Society for the Advancement of Material and Process Engineering (SAMPE) Conference, Long Beach, CA, Paper No. 3165, pp. 1-15.
Wei, J., Dehdashti, M.K., Dharani, L.R., Chandrashekhara, K., Hilmas, G.E., and Fahrenholtz, W.G., 2013,“Simulation of Thermal and Mechanical Response of (Zr,W)B2 Ceramic after Oxidation,” Proceedings of the 2nd International Conference on Engineering and Innovative Materials (ICEIM), Shanghai, China, pp. 1-10.
Al Mutaz, M., Malott, L., and Chellappan, S., 2013,“Leveraging Platoon Dispersion for Sybil Detection in Vehicular Networks”, IEEE Intl. Conf. on Privacy, Security and Trust (PST).
Vishwanathan, S.P., Malott, L., Chellappan, S., and Doraiswamy, P.M., 2013, “An Empirical Study on Symptoms of Heavier Internet Usage among Young Adults", Proc. of IEEE Int. Conf. on Advanced Networks and Telecommunication Systems (ANTS), Chennai.
Dutta, N., and Chellappan, S., 2013, “A Time-series Clustering Approach for Sybil Attack Detection in Vehicular Ad hoc Networks”, Proc. of Intl. Conf. on Advances in Vehicular Systems, Technologies and Applications (Vehicular), Nice.
Paruchuri, V., Lenin, R.B., and Chellappan, S., 2013, “Arrival time based Traffic Signal Optimization for Intelligent Transportation Systems", Proc. of IEEE Advanced Information Networking and Applications Conf. (AINA), Barcelona.
Yu, R., Wang, X., and Das, S.K., 2013, “An Information Entropy Approach for Sleep Scheduling in Densely-deployed Sensor Networks,” Proceedings of IEEE 9th International Conferrence on Mobile Ad-hoc and Sensor Networks,” Dalian, China. (Best Paper Award)
Datta, S., and Das, S.K., 2013, “Analyzing the Effect of Client Queue Size on VoIP and TCP Traffic over an IEEE 802.11e WLAN,” Proceedings of 16th ACM/IEEE International Conference on Modeling, Analysis and Simulation of Wireless and Mobile Systems (MSWiM), Barcelona, Spain, pp. 373-376.
Shiraz, Q., Shariar, M., Kumar, M. and Das, S.K., 2013, “PCV: Predicting Contact Volume for Reliable and Efficient Data Transfers in Opportunistic Networks,” Proceedings of 38th Annual IEEE Conference on Local Computer Networks (LCN), Sydney, Australia.
Nazi, A., Liu, D. and Das, S.K., 2013, “Privacy Preserving Query Answering in Peer Data Management Systems,” Proceedings of ICDCS Workshop on Network Forensics, Security and Privacy, Philadelphia.
Datta, S., and Das, S.K., 2013, “Performance Analysis of Multiple Classes of Traffic in Wi-Fi Networks: A Markov Chain-Based Approach,” Proceedings of IEEE International Wireless Communications and Mobile Computing Conference (IWCMC), Cagliari, Sardinia, Italy, pp. 299-304.
Haldar, K.L., Agrawal, D.P., and Das, S.K., 2013, “Cost Minimizing Inter-sensing Duration in Cognitive Radio Networks,” Proceedings of 2nd IEEE Workshop on Emerging Cognitive Radio Applications and Algorithms (CORAL), Madrid, Spain.
Imon, S.K.A., Khan, A., Di Francesco, M., and Das, S.K., 2013, “RaSMaLai: A Randomized Switching Algorithm for Maximizing Lifetime in Tree-based Wireless Sensor Networks,” Proceedings of 32nd IEEE International Conference on Computer Communications (INFOCOM 2013), Turin, Italy, pp. 2913-2921.
Datta, S., and Das, S.K., 2013, “Performance Analysis of Real-Time Traffic in Wi-Fi Networks: A Markov Chain-Based Approach,” Proceedings of IEEE Wireless Communications and Networking Conference (WCNC), Shanghai, China, pp. 2102-2017.
Nazi, A., Raj, M., Di Francesco, M., Ghosh, P., and Das, S.K., 2013, “Robust Deployment of Wireless Sensor Networks using Gene Regulatory Networks,” Proceedings of International Conference on Distributed Computing and Networking (ICDCN), Mumbai, India, pp. 192-207.
Khan, A., Shahriar, M., Imon, S.K.A., Di Francesco, M., and Das, S.K., 2013, “PeerVault: A Distributed Peer-to-Peer Platform for Reliable Data Backup,” Proceedings of International Conference on Distributed Computing and Networking (ICDCN), Mumbai, India, pp. 315-329.
Hu, Z. and Du, X., 2013, “A Design Oriented Reliability Methodology for Fatigue Life under Stochastic Loadings,” ASME IDETC 2013.
Zhang, X, Hu, Z., and Du, X., 2013, “Probabilistic Inverse Simulation and Its application in Vehicle Accident Reconstruction,” ASME IDETC 2013.
Du, X., 2013, “An Envelop Approach to Time-Dependent Mechanism Reliability,” ASME IDETC 2013.
Puthenveetil, S.C., Daphalapurkar, C.P., Zhu, W., Leu, M.C., Liu, X.F., Chang, A.M., Gilpin-Mcminn, J.K., Wu, P.H., and Snodgrass, S.D., 2013,“Comparison of Marker-Based and Marker-Less Systems for Low-Cost Human Motion Capture,”, Proceedings of the 2013 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2013), Portland, OR.
Daphalapurkar, C.P., Zhu, W., Leu, M.C., Liu, X.F., Chang, A.M., Gilpin-Mcminn, J.K., Wu, P.H. and Snodgrass, S.D., 2013, “Motion Capture for Human-Centered Simulation Using Kinects,”, Proceedings of the 2013 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2013), Portland, OR.
Kolan, K.C.R., Leu, M.C., Hilmas, G.E., and Comte, T., 2013, “Effect of Architecture and Porosity on Mechanical Properties of Borate Glass Scaffolds Made by Selective Laser Sintering,”, Proceedings of Solid Freeform Fabrication Symposium, Austin, TX.
Leu, M.C., and Garcia, D.A., 2013, “Development of Freeze-Form Extrusion Fabrication with Use of Sacrificial Material,”, Proceedings of Solid Freeform Fabrication Symposium, Austin, TX.
Iyibilgin, O., Yigit, C., and Leu, M.C., 2013, “Experimental Investigation of Different Cellular Lattice Structures Manufactured by Fused Deposition Modeling,”, Proceedings of Solid Freeform Fabrication Symposium, Austin, TX.
Bham, G.H., Leu, M.C., Vallati, M., and Mathur, D.R., 2013, “Driving Simulator Validation of Driver Behavior in Work Zones,”, Proceedings of 2013 Road Safety and Simulation International Conference (RSS2013), Rome, Italy..
Wang, Z. Y., Liu, R. W., Sparks, T. and Liou, F. W., 2013, "Realization of Robot Ink Deposition on Curved Surfaces," Proceedings of the International Forum on Systems and Mechatronics (IFSM), Gui-lin, China.
Liu, H., Sparks, T. E., Liou, F. and Dietrich, D. M., 2013, "Numerical Analysis of Thermal Stress and Deflection in Multi-Layer Laser Metal Deposition Processes," Proceedings of 24th Solid Freeform Fabrication Symposium, Austin, TX.
Zhang, J., Liou, F., Seufzer, W., Newkirk, J., Fan, Z., Sparks, T. E. and Liu, H., 2013, "Probabilistic Simulation of Solidification Microstructure Evolution During Laser-Based Metal Deposition," Proceedings of 24th Solid Freeform Fabrication Symposium, Austin, TX.
Karnati, S., Sparks, T. E., Liou, F. and Matta, N., 2013, "Vision-Based Process Monitoring for Laser Metal Deposition Processes," Proceedings of 24th Solid Freeform Fabrication Symposium, Austin, TX.
Dey, N. K., Liou, F. and Nedic, C., 2013, "Additive Manufacturing Laser Deposition of Ti-6Al-4V for Aerospace Repair Applications," Proceedings of 24th Solid Freeform Fabrication Symposium, Austin, TX.
Chen, X., Fan, X., Liou, F. W. and Newkirk, J. W., 2013, "Numerical Simulation of Dilution and Laser Metal Deposition by Powder Injection," Proceedings of the 41st Annual North American Manufacturing Research Conference (NAMRC 41), Paper No. NAMRC41 - 1623, Madison, WI.
Xu, Y., Liu, J., Tang, M., and X.F. Liu, 2013, “An Efficient Trust Propagation Scheme for Predicting Trustworthiness of Service Providers in Service-Oriented Social Networks”, Proceedings of the 2013 IEEE 20th International Conference on Web Services (ICWS) , Santa Clara, CA, USA, acceptance rate: 19%.
Tang, M., Xu, Y., Liu, J., Zheng, Z., and Liu, X.F., 2013, “Trust-Aware Service Recommendation via Exploiting Social Networks”, Proceedings of the 2013 IEEE International Conference on Services Computing (SCC), Santa Clara, CA, USA, acceptance rate: 19%.
Arvapally, R.S., Liu X.F., and Wunsch, D.C., 2013, “Fuzzy c-means Clustering Based Polarization Assessment in Intelligent Argumentation System for Collaborative Decision Support”, Proc. of IEEE 2013 Annual International Computer Software & Applications Conference (COMPSAC), Kyoto, Japan.
Wang, J., Zhang, F., Liu, X.F., Barnes, E., Cao, B., and Tang, M., 2013, “Integrating Functional with Non-functional Requirements Analysis In Object-Oriented Modeling Tool Based on HOOMT”, Proc. of 2013 International Conference on Software Engineering and Knowledge Engineering (SEKE), Boston.
Zhang, F., Wang, J., Liu, X.F., Cao, B., Tang, M., 2013, “CASAT-HOOMT: Computer Aided Software Analysis Tool Based on High Order Object-oriented Modeling Technique”, Proc. of IEEE 2013 Annual International Computer Software & Applications Conference (COMPSAC), Kyoto, Japan.
Daphalapurkar, C., Zhu, W., Leu, M.C., Liu, X.F., Chang, A., Gilpin-McMinn, J., Wu, P., and Snodgrass, S., 2013, “Motion Capture for Human-Centered Simulation Using Kinects”, Proc. of ASME 2013 International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), Portland, Oregon.
Puthenveetil, S.C., Daphalapurkar, C., Zhu, W., Leu, M.C., Liu, X.F., Chang, A., Gilpin-McMinn, J., Wu, P, and Snodgrass, S., 2013, “Comparison of Marker-based and Marker-less Systems for Low-cost Human Motion Capture”, Proc. of ASME 2013 International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), Portland, Oregon.
Arvapally, R.S., and Liu, X.F., 2013, “Collective assessment of arguments in an online intelligent argumentation system for collaborative decision support”. Proc. of the 2013 International Conference on Collaboration Technologies and Systems (CTS’2013), pp. 411-418, San Diego, CA.
Li, F., Liu, N., Jiang, W., and Liu, X., 2013, “Argument placement recommendation and relevancy assessment in an intelligent argumentation system”. Proc. of the 2013 International Conference on Collaboration Technologies and Systems (CTS 2013), pp: 427-434, San Diego, CA.
Schmidt, S.,1 and Long, S.2, 2013, “An Integrative Literature Review of the Impact of Incentivized Energy Reduction Programs,” Conference Proceedings of the American Society of Engineering Management International Annual Conference, Bloomington, MN.
Egbue, O. and Long, S., 2013, “Analysis of Challenges Affecting the Successful Deployment of Electric Vehicles,” Conference Proceedings of the American Society of Engineering Management International Annual Conference, Bloomington, MN.
Egbue, O.3, Long, S.2, and Ng, E.3, 2013, “Energy Sustainability in Transportation Systems: Translating Electric Vehicle Research Results to 7th and 8th Graders,” Conference Proceedings of the American Society of Engineering Education Annual Meeting, Atlanta, GA.
Grasman, K. S., Cernusca, D., and Long, S., 2013, “Student Perceptions of Online Resources as Predictors of Performance in a Hybrid Classroom: Exploratory Findings from a Large Engineering Economics Course”, Conference Proceedings of the American Society of Engineering Education Annual Meeting, Atlanta, GA.
Shoberg, T., Long, S., Corns, S., Ramachandran, V.1, and Carlo, H., 2013, “Modeling Resiliency in Urban Supply Chain Networks in the Wake of Extreme Event Disasters,” American Association of Geographers Annual Meeting, Los Angeles, CA.
Kumar, V., and Madria, S., 2013, PIP: Privacy and Integrity Preserving Data Aggregation in Wireless Sensor Networks, in the proceedings of 32nd IEEE Symposium on Reliable Distributed Systems (SRDS 2013), Portugal, 1-3, pp. 10-19.
Samanthula, B.K., Jiang, W. and Madria, S., 2013, A Probabilistic Encryption based Min/Max Computation in Wireless Sensor Networks, in the proceedings of 14th IEEE Mobile Data Management conference (MDM), pp. 77-86, Italy.
Chejerla, B., and Madria, S., 2013, Efficient Spatio-Temporal Information Fusion in Sensor Networks, in the proceedings of 14th IEEE Mobile Data Management conference (MDM), pp. 157-166, Italy.
Nerella, V.K.S., Madria, S., and Weigert, T., 2013, Optimization of Object Queries on collections using Annotations for the String Valued Attributes, in the proceedings of 37th Annual IEEE International Computer Software & Applications Conference (COMPSAC 2013), pp. 313-318, Japan.
Nerella, V.K.S., Madria, S., Weigert, T., 2013, An Approach for Optimization of Object Queries on Collections using Annotations, in the proceedings of 17th European Conference on Software Maintenance and Reengineering, Italy, pp.273-282.
Bhonsle, M.V., Poolsappasit, N., and Madria, S.K., 2013, ETIS – Efficient Trust and Identity Management System for Cloud, in the proceedings of 27th IEEE International Conference on Advanced Information Networking Applications, Spain, pp.219-226.
Vemulapalli, C., Madria, S., Linderman, M., 2013, Pre-distribution Scheme for Data Sharing in Mobile Cloud Computing, in the proceedings of ACM Mobile Cloud'13 held with ACM Mobihoc, India.
Gamage, T.R., McMillin, B., and Crow, M., 2013, “Mitigating Event Confidentiality Violations in Smart Grids: An Information Flow Security-based Approach,” IEEE Transactions on Smart Grid, (4)3, pp. 1227-1234, DOI: 10.1109/TSG.2013.2243924.
Patil, S., Vyatkin, V., McMillin, B., 2013, Implementation of FREEDM Smart Grid distributed load balancing using IEC 61499 Function Blocks, Proceedings of the 39th Annual Conference of the IEEE Industrial Electronics Society, Vienna, Austria, Industrial Electronics Society, vol., no., pp.8154,8159, 10-13
doi: 10.1109/IECON.2013.6700497
Roth, T., and McMillin, B., 2013, “Breaking NonDeducible Attacks on the Smart Grid,” Seventh CRITIS Conference on Critical Information Infrastructures Security, DOI: 10.1007/978-3-319-03964-0_9 Amsterdam, Netherlands, Lecture Notes in Computer Science 8328, Springer, pp. 96-107.
Choudhari, A., Ramaprasad, H., Paul, T., Kimball, J.W., Zawodniok, M., McMillin, B., and Chellappan, S., 2013, “Stability of a Cyber-Physical Smart Grid System using Cooperating Invariants,” Proceedings of the 2013 Computers, Software, and Applications Conference (COMPSAC) Kyoto, Japan, pp 760-769.
Howser, G., and McMillin, B., 2013, “A Multiple Security Domain Model of a Drive-by-Wire System,” Proceedings of the 2013 Computers, Software, and Applications Conference (COMPSAC) 10.1109/COMPSAC.2013.62 , Kyoto, Japan, pp. 369-374.
Akella, R., and McMillin, B., 2013, Modeling and Verification of Security Properties for Critical Infrastructure Protection, In Proceedings of the Eighth Annual Workshop on Cyber Security and Information Intelligence Research (CSIIRW '12) 10.1145/2459976.2459983, Article 6.
Fitch, D., Sedigh, S., McMillin, B., and Akella, R., 2013, “CPS-CSH Cyber-Physical Analysis and Design,” Seventh CRITIS Conference on Critical Information Infrastructures Security, 10.1007/978-3-642-41485-5_9 ,Springer, LNCS 7722, Hämmerli, Bernhard; Kalstad Svendsen, Nils; Lopez, Javier (Eds.), Lillehammer, Norway, pp. 92-105.
Roth, T., and McMillin, B., 2013, “Breaking Nondeducible Attacks on the Smart Grid,” Seventh CRITIS Conference on Critical Information Infrastructures Security, 10.1007/978-3-642-41485-5_8, Springer, LNCS 7722, Hämmerli, Bernhard; Kalstad Svendsen, Nils; Lopez, Javier (Eds.), Lillehammer, Norway, pp. 80-91.
Okafor, A.C., and Natarajan, S., 2013 “Acoustic Emission Monitoring of Tensile Testing of Corroded and Un-corroded Clad Aluminum 2024-T3 and Characterization of Effects of Corrosion on AE Source Events and material Tensile Property,” 40th Annual Review in Quantitative Nondestructive Testing Evaluation, Baltimore, Maryland, USA AIP Conference Proceedings, 1581, 492 (2014), DOI: 10.1063/1.4864860.
Okafor, A.C., and Dutta, A., 2013, “Non-Destructive Evaluation of Concrete with Ultrasonic C-Scan and Digital Image Enhancement Technique, 40th Annual Review in Quantitative Nondestructive Testing Evaluation, Conference date: 21-26 July, 2013, Baltimore, Maryland, USA, AIP Conference Proceedings, 1581, 925 (2014), DOI: 10.1063/1.4864920.
Zhao, Q., Xu, H. and Sarangapani, J., 2013, “Finite horizon neural network-based optimal adaptive control design for affine nonlinear discrete-time systems”, Proc. of the Multi Conference on Systems and Control, pp. 41-46.
Sahoo, A., Xu, H., and Sarangapani, J., 2013, “Neural network-based adaptive event-triggered control of nonlinear continuous-time systems in affine form”, Proc. of the Multi Conference on Systems and Control, pp. 35-40.
Grondman, I., Xu, H., Sarangapani, J., and Babuska, R., 2013, “Solutions to finite horizon cost problems using actor-critic reinforcement learning”, Proc. of the International Joint Conference on Neural Networks, pp. 325-331.
Xu, H., and Sarangapani, J., 2013, “Neural network based finite horizon stochastic optimal controller design for nonlinear networked control systems”, Proc. of the International Joint Conference on Neural Networks, pp. 318-324, August 2013.
Qiming Zhao, Hao Xu, Travis Dierks and Jagannathan Sarangapani. “Finite-horizon neural network-based optimal control design for affine nonlinear continuous-time systems”, Proc. of the International Joint Conference on Neural Networks, pp. 2545-2550, August 2013.
Hasan Ferdowsi, S. Jagannathan and M. Zawodniok, “A neural network based outlier identification and removal scheme”, Proc. of the IEEE International Conference on Prognostics and Health Management, pp. 1-6, June 2013.
Hasan Ferdowsi, S. Jagannathan and M. Zawodniok, “Neural network based fault detection and accommodation scheme for distributed systems”, Proc. of the IEEE International Conference on Prognostics and Health Management, June 2013.
A. Sahoo, Hao Xu, S. Jagannathan, “Adaptive event-triggered control of an uncertain linear discrete time system using measured input and output data”, Proc. of the American Controls Conference, pp. 5692-5697, June 2013.
A. Sahoo, Hao Xu, S. Jagannathan, “Neural network-based adaptive event trigger control of affine nonlinear discrete time systems with unknown internal dynamics”, Proc. of the American Controls Conference, pp. 6433-6438, June 2013.
Hao Xu and S. Jagannathan, “Finite horizon optimal adaptive control of uncertain continuous-time systems”, Proc. Of the Yale Workshop on Adaptive and Learning Systems, New Haven, CT, June 4-6 2013.
- Thotla, M. Ghasr, M. Zawodniok and S. Jagannathan, “Correlation based detection and localization of R/C Electronic devices using array detectors”, Proceedings of the IEEE International Instrumentation and Measurement Technology Conference (I2MTC), May 2013.
Haifeng Niu and S. Jagannathan, “Passive RFID tag with multimodal sensors with applications”, Proceedings of the IEEE International Instrumentation and Measurement Technology Conference (I2MTC), May 2013.
Qiming Zhao, Hao Xu and S. Jagannathan, “Finite horizon optimal control design for uncertain linear discrete-time systems”, Proc. Of the IEEE Symposium on Adaptive Dynamic Programming and Reinforcement Learning, pp. 6-12, April 2013.
Hao Xu and S. Jagannathan, “Finite-horizon stochastic optimal control of uncertain linear networked control systems”, Proc. Of the IEEE Symposium on Adaptive Dynamic Programming and Reinforcement Learning, pp. 24-30, April 2013.
Haci Guzey and S. Jagannathan, “Neural network-based consensus formation control of mobile robots”, Proc. Of the SPIE, April 2013.
Zhou J., Khalilollahi A., and Tsai, H.L., “Transport Phenomena and Thermal Stress Formation in Hybrid Laser–MIG Welding,” ASME 2013 International Mechanical Engineering Congress & Exposition, San Diego, CA, November 15–21, 2013.
Zhou J. and Tsai H.L., “Heat and Mass Transfer in Hybrid Laser–GMA Welding,” ASME 2013 Fluids Engineering Division Summer Meeting, Incline Village, Nevada, July 7–11, 2013.
R. Modares, F. Lewis, T. Yucelen, and G. Chowdhary, “Adaptive optimal control of partially-unknown constrained-input systems using policy iteration with experience replay,” AIAA Guidance, Navigation, and Control Conference, Boston, Massachusetts, 2013.
T. Yucelen, G. De La Torre, W. M. Haddad, and E. N. Johnson, “Application of a robust adaptive control architecture to an aeroelastic generic transport model,” AIAA Guidance, Navigation, and Control Conference, Boston, Massachusetts, 2013.
T. Yucelen, “Adaptive spacecraft control: Stability, performance, and robustness,” AIAA Guidance, Navigation, and Control Conference, Boston, Massachusetts, 2013.
T. Yucelen, G. De La Torre, and E. N. Johnson, “Comparison of a new frequency-limited adaptive control architecture with standard and state predictor-based adaptive controllers,” AIAA Guidance, Navigation, and Control Conference, Boston, Massachusetts, 2013.
McMillin, B,; Ramaprasad, H.; Chellapan, S.; Kimball, J.W.; Zawodniok, M.; Choudhari, A.; “Stability of a Cyber-Physical Smart Grid System using Cooperating Invariants,” IEEE COMPSAC 2013.
S. Ebrahimi Asl, M.T. Ghasr, M. Zawodniok, and K.E. Robinson, “Preliminary Study of Mutual Coupling Effect on a Passive RFID Antenna Array,” IEEE I2MTC 2013
Thotla, V.; Zawodniok, M.; Jagannathan, S.; Agarwal, S., "Correlation based detection and localization of R/C electronic devices using array detectors," Instrumentation and Measurement Technology Conference (I2MTC), 2013 IEEE International, pp.1636,1639, 6-9 May 2013, doi: 10.1109/I2MTC.2013.6555691
G. Wang, J. Wu, and Y. R. Zheng, “Optimum Energy Efficient Communications for Hybrid ARQ Systems,” IEEE Globecom 2013. Atlanta, GA, Dec. 9-13, 2013. pp. 1-6.
Y. R. Zheng, Z. Yang, J. Hao, and P. Han, “Hardware Implementation of Underwater Acoustic Localization System for Bridge Scour Monitoring,” MTS/IEEE OCEANS 2013, San Diego, CA, Sep. 23-27, 2013. pp. 1-6.
Z. Chen, Y. R. Zheng, J. Wang, and J. Song, “Synchronization and Doppler scale estimation with dual PN padding TDS-OFDM for underwater acoustic communications,” MTS/IEEE OCEANS 2013, San Diego, CA, Sep. 23-27, 2013. pp. 1-6.
A. Radchenko, D. Pommerenke, G. Chen, P. Maheshwari, S. Shinde, V. Pilla, Y. R. Zheng, “Real-time bridge scour monitoring with magneto inductive field coupling”, Proceedings of Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, SPIE 2013 Conference, San Diego, CA, March 10-14, 2013.
B. Hirst and Y. R. Zheng, “Utilization of MATLAB Simulink Exercises for an Undergraduate Communications Course,” Annual Conf. American Society of Engineering Education (ASEE), Atlanta, GA, June 23-26, 2013. Pg 1-10.
B. Han, Z. Yang, and Y. R. Zheng, “FPGA Implementation of QR Decomposition for MIMO-OFDM Using Four CORDIC Cores,” IEEE ICC 2013, Budapest, Hungary, June 9-13, 2013. pp. 1-6.
J. Wu, G. Wang, and Y. R. Zheng, “Energy and Spectral Efficient Transmissions of Coded ARQ Systems,” IEEE ICC 2013, Budapest, Hungary, June 9-13, 2013.
Follow Intelligent Systems Center